Question about 1995 Toyota Camry

Open Question

A replacement back seat (bottom)

Hello- We are looking for a back seat (bottom only) cushion for our 1995 Camry DX. What other year's would fit the '95?
Thank you so much, T.A.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove back seat of 1999 cavalier


Look on the bottom of the lower cushion, where it meets the floor. If you don't see 2 screws or bolts (one on each side of cushion) there, then there are clips that the bottom cushion uses to fit tight into the floor. To remove the bottom cushion, you shove it towards the rear and then lift up and out of where the clips hold it fast. Sometimes you really have to push the cushion hard towards the rear to get the clips loose. Then you lift up the bottom cushion and remove it. Now you can remove the upper portion of the seat. Usually there are 2 bolts down at the bottom of the upper cushion. Remove those and the upper portion can be removed. If there are no bolts on the bottom of the upper cushion, then you just lift it up and out of slots that held it fast.
Do the bottom cushion first.

May 11, 2016 | Seat Cars & Trucks

1 Answer

How do I access the top of my rear strut on 2009 Camry Hybrid


I just replaced my rear struts on my 2009 Camry Hybrid. This was the second time in my life I ever did this kind of work. The trick is to get access to the top of the strut. You have to fold down the back seat cushions. In my hybrid there are two pull levers in the trunk that release the seats. The levers are at the top of the trunk.

Once you fold down the seats, there will be two side cushions on the side of the seats that did not fold down. At the bottom of that side cushion, between the side cushion and the bottom seat is a bolt holding the side cushion on. It is way in the back so you will need an extension with a 12mm socket to get to the bolt. Dont be afraid to dig into the space between the cushions to find the bolt. Once you unscrew the bolt, you can lift up on the side cushion and it will come out (lift upward). You now have a clear (and easy) access to the top of the strut. 11_8_2012_9_53_03_pm.jpg11_8_2012_9_53_44_pm.jpg11_8_2012_9_54_13_pm.jpg

Nov 08, 2012 | 2000 Toyota Camry

1 Answer

How to remove the back seat on a 1988 Camry


You must remove the seat cushion first, there are buttons under the seat cushion that you push in while pulling up, one on each side, then just unbolt the backrest unhinge from package tray and remove.

Sep 02, 2012 | 1988 Toyota Camry

1 Answer

He seow do i remove rear seat cushion in 2009 toyota camry


I just replaced my rear struts on my 2009 Camry Hybrid. This was the second time in my life I ever did this kind of work. The trick is to get access to the top of the strut. You have to fold down the back seat cushions. In my hybrid there are two pull levers in the trunk that release the seats. The levers are at the top of the trunk.

Once you fold down the seats, there will be two side cushions on the side of the seats that did not fold down. At the bottom of that side cushion, between the side cushion and the bottom seat is a bolt holding the side cushion on. It is way in the back so you will need an extension with a 12mm socket to get to the bolt. Dont be afraid to dig you had into the space to find the bolt. Once you unscrew the bolt, you can lift up on the side cushion and it will come out (lift upward). You now have a clear (and easy) access to the top of the strut.
11_8_2012_9_36_26_pm.jpg11_8_2012_9_36_48_pm.jpg11_8_2012_9_37_06_pm.jpg

Aug 27, 2012 | 2008 Toyota Camry

1 Answer

How do i remove back seat cushion


The bottom cushion needs to be removed first...look where the bottom of the cushion touches the floor board...you should find 1 bolt on each side that need to be removed...lift bottom cushion out...this will expose 1 bolt on each side that need to be removed for the top cushion...this should allow access to the trunk and/or speakers...:)

Dec 16, 2010 | 1995 Toyota Camry

1 Answer

Remove rear seat


Bottom seat cushion, push in hard on bottom (about 12 inches in from door) and pull up On the back cushion remove two b0lts on bottom of rear cushion. Open trunk, all the way forward you will see on each side 2 10 mm nuts remove those nuts then the rear cushion will come out.

Sep 08, 2010 | 1995 Cadillac DeVille

1 Answer

How do you remove back seat in 1995 buick regal


To remove the bottom seat section, pull up the seat cushion where it meets the seat back. There is usally a hook on each side of the seat bottom that hooks onto the floor on each side.

Mar 06, 2010 | 1995 Buick Regal

1 Answer

Remove the back seat of a 1995 mustang conv? how do you release the hold-down clips on the seat bottom?


remove any bolts that are on the two lower brackets on the floor under the seat cushion. take your knees and push the seat cushion back and pull up. the seat should come out

Feb 20, 2010 | 1995 Ford Mustang

1 Answer

How do you remove the rear seat of 2004 honda accord


Release the two latches at the front of the seat cushion (pull back on the latches to release the front of the cushion).

Remove the seat cushion bolt and remove the cushion (it’s roughly in the center. You have to insert a socket extension between the back and bottom seat cushions to take it out, after you find it by pressuring the bottom cushion and looking back in there).

Remove the bolts (each side) securing the seat side bolsters (they are easy to see once the bottom cushion is removed), then remove the side bolters (gently release the clips that hold them in).

Pull the seat forward, then remove the fasteners securing the seat hinge (seat pivot bracket) and remove the seat backs.

Hope this helps you.

Dec 10, 2009 | 2004 Honda Accord

1 Answer

Seats (grey/leather) -1995 900 Turbo SE


Neoprene two tone seat covers are available at State of Nine but are pricey. You can spend about $250 and perform a DIY leather repair and dye job to the entire interior. Here is what I did, using leather cream crack filler and auto leather dye. It lasts about three years and then requires touching up.

Dec 08, 2008 | 1995 Saab 900

Not finding what you are looking for?
1995 Toyota Camry Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...