Question about 1999 Ford Taurus

1 Answer

1998 ford Taurus 24v DOHC Overheating not thermostat

1998 ford Taurus 24v DOHC overheating problem and i have already changed the thermostat

Posted by on

  • Anonymous Mar 15, 2014

    cant find my thermostat in my 96 ford taurus

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Check to see if eans coming on if they dont then its fan relay if they are the rad is pluged or ther is an air pocket in the cooling system there should be a bleeder on it

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Overheated, now won't run


Hi,
If the head gasket was blown by overheating, it could have ruined the engine bearings, which could keep it from running.

GL,
TD

Oct 30, 2013 | 1995 Ford Taurus

1 Answer

Leaking coolant on a 1999 Ford Taurus 3.0 DOHC


No Idea what is leaking until you tell us

Nov 22, 2012 | 1998 Ford Taurus

1 Answer

Shaun just answered my question on a thermostat change on a 3.0 in my 1998 Taurus. Is the answer the same if it is the 24V DOHC?


Hi, this is Shaun again. The answer is the same for a 24v DOHC. Coolant systems are pretty simple and haven't evolved much with different vehicles and motors. It's pretty much the same process with all vehicles.

May 06, 2011 | Ford Taurus Cars & Trucks

1 Answer

1998 Ford Taurus - thermostat - easy change? where is it?


Hi, welcome to FixYa! My name is Shaun. To answer your question, a thermostat is a very easy change. Follow your upper radiator hose into your motor. Where the hose joins the top of the block, you will see an elbow of sorts, held in place by a couple of bolts. This is your thermostat housing. Remove the thermostat housing and the old thermostat, and replace with the new thermostat, paying close attention to the orientation of the thermostat you removed. If installed backwards, the thermostat will not operate. With the new thermostat installed, apply a thin coat of blue RTV silicone sealant to each side of the new gasket, seat the gasket over the thermostat, and reinstall the thermostat housing. Replace ant lost coolant, and if nesessary, burp the system to release any trapped air to prevent overheating. That's it, you're done! The whole process should take less than 30 minutes. Hope this helps! Have a good day!

May 06, 2011 | 1998 Ford Taurus

1 Answer

My car is overheating. I checked the thermostat, and it appears to be functioning properly. I checked the fan and it runs when the engine starts to heat up. Shortly after heating up I notice that the...


Hello, sbogs105 and thank you for asking your question on Fixya!

Here is a simple process that will walk you through a few steps that will pinpoint the overheating problem on your
1998 Ford Taurus, without even using any tools. It has helped millions of people, and I am certain that it will help you, because I wrote it for people in your exact situation.
How to diagnose your overheating
1998 Ford Taurus

Get more great money saving tips and tricks about your vehicle from: twitter.com/acoates23234

Thanks for the vote, and good luck!

Nov 04, 2010 | 1998 Ford Taurus

1 Answer

My 1998 ford taurus is overheating .Already put in a new radiator. Do you think its the head caskets?


if its a 3.0l 2-valve it could have a head gasket or cracked head.
if its a 4v dohc 3.0l it could be the water pump that driven by the
bank2 camshaft... the impeller inside the pump comes aprt and they overheat

Jun 02, 2010 | 1998 Ford Taurus

1 Answer

1996 ford taurus overheating


it could be water pump, radiator fan, check system for leaks, or you might need a new radiator

thanks

Jun 22, 2009 | 1996 Ford Taurus

1 Answer

Overheating engine in 24 valve 96 ford taurus 6 cyl


the thermostat can be easily changed from up top, the T-stat is located at the engine end of the upper radiator hose under the flange the hose connects to. Make sure u follow manufacturer's cooling system bleeding procedures when you refill after the T-stat is changed out.

Jun 14, 2009 | 1996 Ford Taurus

Not finding what you are looking for?
1999 Ford Taurus Logo

1,260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...