Question about 1995 Buick LeSabre

2 Answers

How difficult is it to replace a rotor on a 95 buick lesabre

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Buick Master
  • 3,433 Answers

The anawer to that is.......... It all rests on your ability to comprehend what you are doing, The tooling you have available. I had to pull an engine for the first time at one point in my life and ended up doing it for 40 yyrs.from 4 bangers to `6 cylinder detroit off road diesels. So, If you have, confidence,,you are logical, and have the tools. It should take you about 2 hours to pluck it out and maybe 3 hrs to stab it back in. Oh, Don't start anything unless you have proper references and a friend you can trust and turn to. Good Luck,Ned

Posted on Oct 06, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 198 Answers

20min.job.Out of 1-10 difficulty about a 3.Remove wheel.Remove caliper.Take off dust cover.Remove cotter pin and axle nut.Rotor slides off.

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Minimum thickness for buick lesabre front rotors


Hello there
From a kind chap on this page
http://buickforums.com/forums/threads/18395-Service-limits-for-brake-rotors

For a 2000 Buick LeSabre

FRONT BRAKE ROTORS:

Discard Thickness30.7 mm (1.209 in.)
Lateral Runout (New)0.06 mm (0.002 in.)
Minimum Thickness after Refinish31.08 mm (1.224 in.)
Rotor Diameter 15 inch Wheels (New)278.0 mm (10.9 in.)
Rotor Diameter 16 inch Wheels (New)303.0 mm (11.9 in.)
Rotor Thickness (New)32.20 mm (1.267 in.)
Thickness Variation (New)0.025 mm (0.001 in.)

Sep 15, 2014 | Buick LeSabre Cars & Trucks

1 Answer

My 2004 LeSabre shakes bad when I brake at around 50 mph. I changed the front brake pads. How difficult is it to change the front rotors?


Actually, changing the front rotors is not that difficult and they are relatively in-expensive. Anytime you change the pads on the front of your vehicle i would recommend having the rotors resurfaced or replaced. Especially if you are getting a brake pedal pulse when applying the brakes. Here is a step by step guide that will help you in removing your Front rotors.

Nov 03, 2010 | 2004 Buick LeSabre

1 Answer

On my 2000 buick lesabre, when I am going 70 - 80 mph and I hit the brakes the car shakes badly. I have read that this car has had tie rod problems, rotor problems and overall steering assembly problems....


if your vehicle shakes when you apply the brakes, your rotors are warped or worn. Replace the brakes and rotors!!Steering system will not cause this!!

Sep 27, 2010 | 2000 Buick LeSabre

1 Answer

Will a 1995 buick leSabra engine work in a 1997 buick leSabre


Yes, as long as the engine mounts line up, a 95 engine will work in a 97. Be certain that the transmission in 97 will mount to the 95.

Jun 19, 2010 | 1995 Buick LeSabre

1 Answer

95 buick lesabre - when turning the key I get nothing. Battery replaced, starter replaced - still nothing.??


check/ change the neutral safety switch and also check the battery ground going to the body from the battery

Jan 19, 2010 | 1998 Buick LeSabre

1 Answer

My 95 Buick LeSabre skips a lot when breaking.


Warped rotors or bad brake pads. Remove and replace. It could aslo your electronic brake pressure modulator valve. Its on the left side under your dash. When you start your car does the red BRAKE warning light come on for a few seconds and then go out? If it does, that's normal, and your problem is warpage or pads. Be sure your brake fluid resovoir is full too.

Jun 04, 2009 | 1995 Buick LeSabre

1 Answer

How to replace rear rotor on buick lesabre 2002


Pull the rear caliper off and remove and replace the rotor. You will need a special tool to retract the caliper back as well.

May 12, 2009 | 2000 Buick LeSabre

Not finding what you are looking for?
1995 Buick LeSabre Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...