Question about 2005 Pontiac Sunfire

1 Answer

How can i turn off the a/c to the front window only

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

On your car there is an electric motor under your dash that moves a door to change where the air comes out of.This motor may be bad and you wont be able to change where the air comes from until you correct the problem with this door/motor.

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I've taken out the relay to turn off my front


Are you sure that is not the AC compressor relay?
I don't know your car, but not aware of any cars having a defroster relay, a defogger relay for the rear window with the electric grid in the window, yes. Never heard of a defroster relay.

Sep 22, 2013 | Cars & Trucks

1 Answer

1993_ford_f_150 turn on heater and front vents mist up window?


does it smell like antifreeze if so its the heater core i just replaced mine, also check your water pump in front behind belt pully's while running it should be dripping.

Dec 23, 2011 | Cars & Trucks

1 Answer

Front and rear window doesn't work. turn signals


short in wires but check all fuses to see they are not bad first. Its most likely bad wires or the electric components of the switch for the windows.

May 24, 2011 | 1998 Buick Century

1 Answer

Problem with drivers door power window. 1992 lexus es 300 motors runs when button is pushed, window does nothing how do i get the window back on its track?


1999 Lexus ES300. The front power windows are opening on their own. I park, turn off engine, lock the doors and within a half hour the front windows have opened completely. Any thoughts on this problem?

Nov 23, 2010 | 1992 Lexus Es 300

1 Answer

How to remove the passenger side door panel on a Ford F250 super Duty.


Front Door Trim Panel Removal and Installation
NOTE: Left front door trim panel shown, right front door trim panel similar.
  1. Remove the exterior mirror mounting hole cover.
    dr0676a.gif
  1. If equipped, remove the window regulator handle.
    1. Position the window regulator handle cover aside.
    1. Remove the window regulator handle screw and regulator handle.
    n0006864.gif
  1. If equipped, remove the window control switch plate.
    • Disconnect the window control switch electrical connectors and if equipped, the memory set switch electrical connector.
    dn0641b.gif
  1. If equipped, remove the front door trim panel reflector or the courtesy lamp lens.
    dr0677a.gif
  1. Remove the screws.
    dr0678a.gif
  1. ani_caut.gif CAUTION: Do not pull directly outward on front door trim panel, as damage will occur.
    NOTE: Remove the front door trim panel by pulling it straight upward.
    Lift and remove the front door trim panel.
  1. If equipped, twist the courtesy lamp connector one half turn and remove it from the front door trim panel.
  1. ani_caut.gif CAUTION: Insert the lower panel tabs first or they can break when installing the front door trim panel.
    To install, reverse the removal procedure.

Feb 27, 2010 | 2002 Ford F250 Super Duty SuperCab

1 Answer

A190 front side window stuck in half open position


Hi. The Front windows are on a seperate fuse from the rear and this MAY be your problem. the fuse for the front windows is fuse No 33 - 30amp. (that’s the fourth fuse from the left / centre row, the fuses are numbered) The Rear window fuse is No 42 just for information.

If the battery has been discharged you MUST!!! Reset the Power Windows and Traction control. It's very simple and the instructions are in your driver’s manual. But just in case you don’t have it, here they are:

Resetting the side Power Windows
If the voltage supply is interrupted (battery disconnected or flat), the side windows must be reset to prevent injury to driver or passengers:
  1. Turn the key to position 2 in the ignition lock.
  2. Press on the switches to the (Up or Closed position) pressure point until the windows are fully up, and hold for approximately 1 second.
Resetting the ESP (Electronic Stability Program or “Traction Control Systems”)
If the voltage supply is interrupted (battery disconnected or flat), the indicator lamp will light up while the engine is running.
  1. Turn the steering wheel from stop to stop while the engine is running. The indicator lamp will go out & the ESP system is reset.
If you need a copy of all the fuse values and locations etc. Post a reply here at FixYa with your email address and I will forward you a schematic diagram……..[did one for myself that’s easier to understand / follow than the Merc one]

Hope this helps!!!!

Jul 05, 2009 | Mercedes-Benz 190-Class Cars & Trucks

1 Answer

How to take out the light assy on a 2004 Toytota sienna van.RH side. Do you have to take off the front cap (bumper)


Yes....herer is the steps to replacing it:

Headlight Assembly Removal & Installation Standard Headlights To Remove:
  1. Disconnect the battery ground cable.
  2. Remove the left and right front inner fenders. Fog light & headlight assembly (exploded view) toyota-06-00-5662.gif

  3. Remove the 8 screws and separate the front splash shield from the front bumper fascia.
  4. Remove the 5 push-pins from the top of the fascia grille.
  5. Release the retainers on the left and right sides of the front bumper fascia and pull the fascia toward the front of the vehicle.
  6. Disconnect the headlight assembly connectors.
  7. Remove the mounting bolt, 3 screws and headlight assembly.
  8. Turn all bulb sockets counterclockwise to remove.
To Install:
  1. Turn all bulb sockets clockwise to install.
  2. Align the retainers with the slots and install the front fascia.
  3. Install the 5 push-pins on top of the fascia grille.
  4. Install the front splash shield on the front bumper fascia with the 8 screws.
  5. Install the left and right front inner fenders.
  6. Connect the battery ground cable.
  7. Vehicles with power windows perform the following steps:
    • Turn the ignition switch on.
    • Open the power window halfway.
    • Close the window and continue to hold the switch up for at least 1 second after the window is closed.
    • Ensure that the auto up/down circuit is operating properly.
    • If the auto up/down circuit does not operate, disconnect the battery ground cable for 10 seconds.
    • Connect the battery ground cable.
    • Turn the ignition switch on.
    • Open the power window halfway.
    • Ensure that the auto up/down circuit is operating properly.
    • If the auto up/down circuit does not operate, turn the ignition switch on.
    • Open the power window halfway.
    • Close the window and continue to hold the switch up for at least 12 second after the window is closed.
  8. Vehicles with sliding roof system perform the following steps:
    • Turn the ignition switch on.
    • Press and hold the TILT UP switch until the glass tilts to the full up position. The glass will automatically tilt slightly down after it reaches the up position.
    • Release the switch.
    • If the sliding roof does not operate properly, replace the sliding roof ECU.

May 07, 2009 | 2004 Toyota Sienna

1 Answer

The power window on the front left side is not


Had to replace the switch cluster on ours. Same problem.

Also had problems with passenger side. Motor worked, but the window didn't move. Turned out to be a broken (rusty) cable in the window regulator.

Mar 22, 2009 | 2000 Lincoln Town Car

1 Answer

Front turn indicators don't work, on 04 Cadillac SRX


you may want to check the fuse for the signals and asfor the locked windows, it sounds like your window lock has either seized or the button is off track. In any case, replacement would be the best option.

Feb 23, 2009 | 2004 Cadillac SRX

1 Answer

Front defrost vent doesn't blow any hot air.


You may need to replace the mode selector switch.

Oct 18, 2008 | 1998 Ford Taurus

Not finding what you are looking for?
2005 Pontiac Sunfire Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...