Question about 1990 Jeep Wrangler

1 Answer

1990 jeep yj 4 wheel drive issues

The low gear on my transfer case engages on my 1990 yj but the front wheels engage

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

What are you trying to say is that the front wheels wont engage?? if this is your problem? check the actuater on the passenger side axle there are 3 lines that go to it and that is what pulls it in and pushes it out of gear by air.

Posted on Jun 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990 GMC suburban actuator and fuse location. There is not one on front differential and no place for fuse in fuse block. 4 wheel will not engage. No owners manual


The actuator will not be on the front differential or drive line, it will be on the transfer case, which is mounted behind the transmission. Follow the front drive shaft back from the front differential, and the component at the rear of the driveshaft is the transfer case. That is where four wheel drive is engaged/disengaged.
I'm not familiar with your vehicle, but if you have a separate lever to engage 4wd, there will not be a fuse for the actuator - it is a manual system. If the 4wd is selected electrically, check that all wiring and connectors on the transfer case are in good condition.

Sep 25, 2016 | 1990 GMC Suburban

2 Answers

What is a 4 wheel drive switch


Depending on the make and model, it could be the control switch on the dash or the switch that moves the gears in the transfer case.

Dec 04, 2012 | Cars & Trucks

4 Answers

I have a 1990 K1500 4X4 Chevy pickup that wont engage into four wheel drive. I bought the truck from a friend who had just replaced the actuator on the front end but that did not cure the problem. The...


I had the same problem on my 90 K1500, it was the 4 wheel drive actuator unit itself. Bout it at the local parts store for 30 bucks and installed it in 10 minutes or less - and vavoom! 4 X 4 back in business.

Sep 27, 2009 | 1990 Chevrolet K1500

1 Answer

1987 Jeep YJ [Wrangler] so owner ship says''


Our Jeep Wrangler YJ's are equipped with a vacuum module on the front axle. It is used to engage the front axle when the transfercase is shifted into 4WD. Check the vacuum lines on the front axle to make sure they are connected. The passenger side axle shaft has a disconnect sleeve that is moved left and right by the vacuum.

Mar 01, 2009 | 1987 Jeep Wrangler

3 Answers

4 wheel drive problem on Jeep YJ


you can also check the 4 wheel drive vacuum switch on top of the transfer case...got mine for 10 bucks from parts store...fixed the problem

Dec 21, 2008 | 1992 Jeep Wrangler

1 Answer

4wd problem jeep wrangler yj 1995


i just bought a used 97 CHEROKEE but i had the same problem, when i got to looking at it i found out the front driveshaft was shot, look at that, if its not it i would say its probably the transfer case especially with an older vehicle like that which is a very expenxive repair

Dec 21, 2008 | 1995 Jeep Wrangler

2 Answers

4x4 won't engage


I have to stop, engage 4H or 4L, and shift into nuetral and then the front gear box will then engage and you can hear it from nuetral and the engine at idle, it will slip into gear, if not, in gear go slow with 4x4 light "on" and while rolling slip into nuetral and then back into D, Some transfer cases will not engage in Overdrive, the D with a circle around it so shift into 3rd gear the one to the right of the D with a circle around it. 4 H has a speed limit, and do not shift into 4L while on pavement or you can do some damage.

Dec 21, 2008 | 1997 Ford F150 Regular Cab

1 Answer

91 wrangler 4 wheel will not engage


Check your fluid levels, you need to verify that the transfer case has fluid in it. Also, on one of my old jeeps the lever that put it into 4 wheel drive just stuck a litle. After yanking the **** out of it and moving it back and forth, drive a litle then stop and do it all over again.. a few times. it went into 4 wheel drive. this is why you are suposed to engage your 4 wheel drive once a month and drive around the block, just to make sure it gets flid where its supose to. if it doesn't get engaged then the fluid just sits at the bottum of the transfer case and doesn't get up on the gears.

Dec 20, 2008 | 1991 Jeep Wrangler

Not finding what you are looking for?
1990 Jeep Wrangler Logo

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...