Question about 1998 Ford Taurus
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: power windows
I had the same problem alot with a 95 Windstar. you need to replace some relays in the fuse panel under the dash. it should be labeled on the cover. unfortunately i've since sold the van... but i believe you need to replace the one touch down relay.
Posted on Mar 18, 2009
some times by banging on door panel while pushing switch,,if the window moves,,then put it up & go get a window motor,if you want you have to take inside door panel off to excess the power motor or to ck power with test light
Posted on May 17, 2010
Testimonial: "window motor was bad. also it gets hot when used. I suggest you let the motor cool a little while before you put it up and down again. found out the hard way. thank you"
Open the door pannel check the window regulator by pushing the up and down button. If no noise herd replace the motor but before replacing make sure the window is set in the window track properly
Posted on Mar 12, 2012
Tips for a great answer:
Jan 19, 2016 | Cars & Trucks
Before you replace anything, inspect the connector pins in both the driver's door switch and the passenger door switch. If you don't find any problem with these connector pins, replace the driver's door control switch.
Sep 12, 2012 | 2011 Hyundai ix35 2.0
Jun 28, 2012 | Isuzu Trooper Cars & Trucks
Mar 12, 2012 | 1997 Ford Thunderbird LX
Feb 28, 2012 | 2004 Chevrolet TrailBlazer
Sep 07, 2011 | Jeep Grand Cherokee Cars & Trucks
Aug 09, 2011 | 2005 Chevrolet Silverado
May 17, 2011 | Buick Century Cars & Trucks
May 14, 2011 | Toyota Sienna Cars & Trucks
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: