Question about 2005 Chrysler PT Cruiser

Open Question

I have a P2704 code How do I fix the problem that the code refers to? Mass air flow and etc 1.4 liter THX Mike

Posted by on

  • yadayada
    yadayada May 11, 2010

    this is not a vaild code check again

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
leetamara
  • 702 Answers

SOURCE: having problems with my 96 chevy tahoe mass air flow

The MAF (Mass Air Flow) sensor is a very common problem with these along with the pickups. This isn't what you would call an inexpensive part. Definitely do some shopping before you buy one.

Posted on Nov 10, 2008

Ad
autodr
  • 260 Answers

SOURCE: Cleaning the Mass Air Flow Sensor

i will try to help. 171/174 indicates lean condition in engine. the mass air flow sensor is located in the rubber tube going to throttlebody. you can try to clean it. using mild carb cleaner safe for sensors, remove sensor from tube. spray clean the tiny wires located in the cylinder. do not touch them, they are very delicate. these engines are also notorious for leaking intake gaskets and faulty pcv valves. these will all set these 2 codes. feel free with anymore questions.

Posted on Nov 15, 2008

  • 566 Answers

SOURCE: Where is the mass air flow sensor located on a jaguar x-type

hi from the uk the location of mass air flow sensor on x type jag is as follows==it is on the r/h/side of the air filter cover with jaguar embossed on top? this sensor is just prior to the intake hose that connects to the motorised throttle body from filter connections underneath it to unplug and meter is held by two screws ?if memory serves ? may i suggest you remove the large hose and use a little wd40 or similar to clean /lubricate the throttle butterfly in throttle body throat at this point so as to prevent future sticking upsetting of idling ? hope this helps ?

Posted on Dec 20, 2008

  • 2 Answers

SOURCE: mass air flow sensor is

My check engine light came on and the code came back saying that the mass air flow sensor was out. All I did was change the air filter even though I really didn't think it needed it, the light went off and has not come back on yet. Knock on wood!

Posted on Jul 26, 2009

techbuster
  • 5081 Answers

SOURCE: Mass Air Flow problem

The M.A.S. is in the top of the metal tube between the air filter box and the intake manifold. It will have a wire connected to it and it is held in by 2 screws. This is an easy replacement and should take no more than 5 to 10 minutes, assuming you are taking your time.

Posted on Aug 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a '11 Toyota Camry LE, the VSC, and engine light are on. I have these codes from the local auto parts shop: C1201, P0171, and P0101.


code p 101 refers to mass air flow(MAF)sensor/volume air flow(VAF) sensor --range performance problem====causes --intake leak/blockage---MAF/VAF sensor

code p 0171 refers to system to lean bank 1===causes ---intake /exhaust leak---AIR system---MAF/VAF sensor ---fuel pressure/pump---injector/s---HO2S ( heated oxygen sensor --the one in the exhaust manifold before the cat converter bank 1)

I don't have a listing for the c code but from the other 2 codes I would be checking around the maf/vaf sensors and the HO2S sensor (replace)
start with checking the wiring and connections to both units

Oct 29, 2016 | Toyota Cars & Trucks

1 Answer

I have an 03 Tahoe 4.8 liter I'm getting OBD codes p0120 p0220 p 1516 p2135 please clean the throttle body replace the throttle body with the position sensor my car will not start


code p 0120 refers to mass air flow(MAF) sensor/volume air flow(VAF) sensor---low input===causes wiring short to ground ---MAF/VAF sensor---ECM
code p 0220 refers to throttle position sensor (TP) B /accelerator pedal position (APP) switch B--circuit malfunction===causes --wiring--TP/APP switch---ECM
code p 2135 refers to the same as p 0220 causes and sensors

Apr 03, 2016 | Cars & Trucks

2 Answers

P0101 code


Get a new mass air flow sensor. They are around 100-200 bucks.

Apr 18, 2014 | 2004 Ford Mustang

1 Answer

Gm trouble codes explained


code p0102 refers to mass air flow(MAF) sensor /volume air flow (VAF) sensor -low input. Causes ---wiring short to ground --MAF/VAF sensor ---ECM.

Apr 23, 2013 | GMC Cars & Trucks

1 Answer

Mazda 3 won't idle.


code p0 refers to intake air temp sensor --circuit malfunstion causes are wiring open circuit(broken)wiring short to ground bad earth and ECM.
code po113 refers to mass air flow( MAF) sensor/ volume air flow (VAF) sensor --low input. Causes may bewiring short to ground MAF?VAF sensor faulty ECM
code po327 refers to Knock sensor (KS) bank 1--low input. Cause may be insecure (loose) KS poor connection- wiring ---short to ground incorrectkly tensioned KS and ECM

Mar 10, 2013 | Cars & Trucks

1 Answer

ISUZU TROOPER 3.2 V6 CODE P0101


P0101 ISUZU - Mass Air Flow Circuit Performancexicon.jpghttp://engine-codes.com/p0101_isuzu.htmlForum CodePossible causes- Dirty mass air flow sensor
- Dirty mass air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks
- Faulty mass air flow sensor
Tech notes Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor

Jul 04, 2012 | 2001 Isuzu Trooper

2 Answers

97' TAURUS SHO 3.4 LITER HAVE THE CODE PO102 NEED TEST PROCEDURE TO FIX


inspect Mass air sensor, clean with electrical cleaner and test. should read around 3 on scanner and jump to 15-20 upon accelaration if not replace.

Apr 09, 2010 | 1997 Ford Taurus

1 Answer

1999 Dodge Ram 1500 Pickup error code p0171


This code means that system to lean, bank 1.
some of the possible causes to make this code set are
1. intake or exhaust leak,
2. problem with the air system.
3. MAF (Mass Air Flow sensor)VAF sensor (Volume air flow sensor)
4. fuel pressure/pump
5. injector(s)
6. HO2S (Oxygen sensor)

Sep 15, 2009 | 2003 Jaguar Vanden Plas

1 Answer

System lean on bank 1 /code 102 mass air flow circuit low input


FIRST CHECK FUEL PREASURE (I THINK ABOUT 3,3 BAR).IF OK, CHANGE AIR FLOW SENSOR.
MARKO

Aug 03, 2009 | Chrysler Concorde Cars & Trucks

Not finding what you are looking for?
2005 Chrysler PT Cruiser Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...