Question about 1989 Jeep Wrangler

1 Answer

I have a 89 jeep wrangler and the rear passenger side turn light, break light, or tail light will not work. It was working and still is on the front. I have checked bulb and fuse and I cant find. Its like Im not getting power from the fuse box or something. Please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Like any bulb, it needspower and ground. Probe the contact in the bulb socket with a test light and check for power. If you have power, use the same ground you did for the test light and connect a short piece of wire there and probe the socket with the bulb installed (insert down into the socket between the bulb and socket) If the light comes on re-ground the socket.
If you get nothing for power check the harness closer to the switch...if nothing there you may need to check the signal switch to make sure an internal contact hasn't failed. I'm betting it's a bad ground though.

Posted on Oct 06, 2009

Testimonial: "Ur the Guru! Thanks man, you saved me big time money. Bought a turn signal switch for $20+ and rented a steering wheel puller and fixed problem."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 chevy S10 4x4 passenger rear turn signal and break light not working


I would try measuring for 12 volts at the socket while the turn signal is on.

May 11, 2017 | 1998 Chevrolet S-10 Pickup

1 Answer

Tail lights not working but the brake and turn signal works


no year, ? check the haz fuse. at left knee.? a wild guess. no year.
parking lights, the work on the front and rear. not just tail.
the parking lights and brake and turn all are controlled by the hazard module. and on jeeps , turns and brakes are a shared resource (blubs)
major warngler mile stones, all vastly different. are and i quote.
The Wrangler debuted in 1986 as a revision of the Jeep CJ-7, was revised in 1996, and completely redesigned in 2006

Nov 26, 2013 | Jeep Wrangler Cars & Trucks

2 Answers

2000 jeep grand cherokee none of the rear lights work


Check BackUp Module, generally is located in the rear quarter panel (drivers side).

Dec 23, 2012 | 2000 Jeep Grand Cherokee

1 Answer

No tail lights, fog lights, rear turn signals, brake lights or parking lights. Head lights and flashers work.


Wht you are describing could be disconnect wiring plug, Examine the wiring going to the tail laight assy, it may be at the front engine compartment or in the foot well , if you had any work done lately ie Starter, Pedal box or Lighting switch area these may be worth revisiting ! It's not a fuse problem . Good luck

Apr 04, 2010 | 2000 Jeep Wrangler

1 Answer

1991 jeep wrangler front drive shaft isnt turning. Once in a while gears will grind but front diff isnt working


you have a vacumn actuator on the passenger side front axle tube that engages your front axle when put in four wheel drive. those are notorious for not working

Feb 01, 2010 | 1992 Jeep Wrangler

1 Answer

No break lights, tail lights or blinker on passenger side


check fuses with a tester. just because they look good can be missleading

Oct 05, 2009 | 1989 Jeep Cherokee

1 Answer

My 1993 Jeep Wrangler, the tail lights and dash lights are not working, when I change the fuse it blows immediately?


Trace the wiring. you must have a bare wire or something shorting the circuit. The wiring will run from the front to the rear under the lip inside the drivers side door and continue along under the lip along the top inside of the body tub to the drivers side rear corner. then down through the fender well in the corner near the back of the roll cage.

Mar 02, 2009 | 1993 Jeep Wrangler

2 Answers

Rear tail / brake lights not working


the problem is not the bulb it is the connectors the bulb is connected to...rebend them so they touch....its happening on all the 2000 jeeps...email me for any more questions...jave21@YAHOO.COM

Jan 18, 2009 | 2000 Jeep Grand Cherokee

1 Answer

1998 jeep wrangler sahara brake, tail and turn signal wont work


Did you go off road in the mud or woods?If so the connecting plug where all the connect probably has gotten disconnected.I think it is near or between the fuel tank and rear bumper.

Aug 30, 2008 | 1998 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...