Question about 1997 Pontiac Bonneville

1 Answer

2000 lumina turn signal lever broken off

How do i get the turn signal lever out of the switch? someone reached into the window and broke it off. i have the replacement just need to know how to get the stub out of the switch.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 347 Answers

Its best to take steering wheel off and change it its faster and easier

Posted on Oct 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 Chevy lumina van, heat on won't turn off. A/c


Hi wodermom26,

Your Lumina APV is a clone of the Pontiac Transport and Oldsmobile APV's which all have identical Heater & A/C controls. The Heater & A/C controls usually wear out mechanically causing no control of temperature. This is a difficult repair and is best made by a dealers ASE Certified Technician. A/C may require re-charging and or possible replacement of the hoses which carry the refrigerant as they become porous and leak. Additionally, the Compressor and its Clutch may possibly require replacement.

The High beams are controlled by pushing the Turn Signal switch forward toward the Instrument panel and have a momentary "Flash to Pass" function by pulling the Turn Signal Lever upward toward the steering wheel and return to Low Beam upon release of the turn signal Lever. If neither function of the Beam selector lights the High Beams it is pssible that the Headlamp bulbs are burned out or open connections in the wiring harnesses. Do you have an owners manual for your Lumina? If so it has information regarding the Multi-Functions of the Turn Signal Lever.

Rapid Robert

Sep 25, 2011 | 1995 Chevrolet Lumina Apv

2 Answers

Left turn signal doesnt work and my brakelights


  1. Check the fuse make sure it is not busted and also use a designated amp only.
  2. Check the bulb and the wires also.

Mar 28, 2010 | 1997 Chevrolet Lumina

2 Answers

On my 1999 Chey Lumina. My brake lights wont come on except for the one in the back window


I was having similar issues with my '95 Lumina. It started out with the passenger side brake light not working and the turn signal switch on the column acting funny.
Eventually, someone pulled-up next to me and told me that I had no rear lights at all.
It turned out to be the turn signal switch in the sterring column.
Hope this helps.

Jan 12, 2010 | 1999 Chevrolet Lumina

1 Answer

1997 Chevrolet Lumina : upper brakelight (window) works, lower brakelights don't work. Changed bulbs and fuse-no go. Most logical theory so far is that they are on seperate circuits, the lower lights run...


Will your Center High-Mount Stop Light (CHMSL) illuminate when you depress the brake pedal, but the lower/outer lights will not?
-- Do you have to hold the signal lever in a certain spot to get the turn signals to flash?
-- Do you have to hold the signal lever in a certain spot to get the lower/outer brake lights to illuminate?
-- Will the signals work in one direction, but not the other?
If you answered yes to any of the preceeding questions, your turn signal switch is likely malfunctioning.

**One more question before we continue: Is the turn signal lever not "cancelling" (returning to the "off" position) after you make a turn? If this is the case, you have a broken "cancelling spring."


Before you begin disassembly of your steering column, verify the turn signal flasher is not malfunctioning. If your brake lights work fine, but not the signals (either direction,) then it's likely the flasher is burnt out. The flasher itself is located underneath the dash near where the steering column passes through the firewall

Nov 27, 2009 | 1997 Chevrolet Lumina

3 Answers

Just bought second hand 98 chevy lumina and someone stopped me saying I have no brake lights, so I checked and I only see a place for backup lights and turn signal lights. Why do I not have any break...


The brake light in the rear window and the main brake lights are on a different circuit. After the signal leaves the activating switch on the brake pedal arm, it splits. One circuit goes straight to the high mount brake light, the other goes into the turn signal switch. If the rear turn signals work but the brake lights don't, suspect the turn signal switch, not the bulbs and wires. Better to check this before removing and checking bulbs, wires and fuses. It is a common problem with the W-body cars like Lumina, Monte Carlo, Buick Regal, Olds Cutlass and Pontiac Grand Prix. (Approx 94-99 models). Part number is GM 190005031 (w/o radio accessory control) or 19005032 (with radio controls)

Nov 21, 2009 | 1998 Chevrolet Lumina

1 Answer

1995 with turn signals not working


Will your Center High-Mount Stop Light (CHMSL) illuminate when you depress the brake pedal, but the lower/outer lights will not?
-- Do you have to hold the signal lever in a certain spot to get the turn signals to flash?
-- Do you have to hold the signal lever in a certain spot to get the lower/outer brake lights to illuminate?
-- Will the signals work in one direction, but not the other?
If you answered yes to any of the preceeding questions, your turn signal switch is likely malfunctioning.

**One more question before we continue: Is the turn signal lever not "cancelling" (returning to the "off" position) after you make a turn? If this is the case, you have a broken "cancelling spring."


Before you begin disassembly of your steering column, verify the turn signal flasher is not malfunctioning. If your brake lights work fine, but not the signals (either direction,) then it's likely the flasher is burnt out. The flasher itself is located underneath the dash near where the steering column passes through the firewall

Oct 31, 2009 | 1995 Chevrolet Lumina

1 Answer

2000 Lumina All fuses good, no Brake or turn signal lights, even on the dash, flasher unit checks good but no power to it. Any ideas out there?


Will your Center High-Mount Stop Light (CHMSL) illuminate when you depress the brake pedal, but the lower/outer lights will not?
-- Do you have to hold the signal lever in a certain spot to get the turn signals to flash?
-- Do you have to hold the signal lever in a certain spot to get the lower/outer brake lights to illuminate?
-- Will the signals work in one direction, but not the other?
If you answered yes to any of the preceeding questions, your turn signal switch is likely malfunctioning.

**One more question before we continue: Is the turn signal lever not "cancelling" (returning to the "off" position) after you make a turn? If this is the case, you have a broken "cancelling spring."


Before you begin disassembly of your steering column, verify the turn signal flasher is not malfunctioning. If your brake lights work fine, but not the signals (either direction,) then it's likely the flasher is burnt out. The flasher itself is located underneath the dash near where the steering column passes through the firewall

Jun 06, 2009 | 2000 Chevrolet Lumina

3 Answers

Brake light problems on a 2000 chevy lumina


Will your Center High-Mount Stop Light (CHMSL) illuminate when you depress the brake pedal, but the lower/outer lights will not?
-- Do you have to hold the signal lever in a certain spot to get the turn signals to flash?
-- Do you have to hold the signal lever in a certain spot to get the lower/outer brake lights to illuminate?
-- Will the signals work in one direction, but not the other?
If you answered yes to any of the preceeding questions, your turn signal switch is likely malfunctioning.

**One more question before we continue: Is the turn signal lever not "cancelling" (returning to the "off" position) after you make a turn? If this is the case, you have a broken "cancelling spring."


Before you begin disassembly of your steering column, verify the turn signal flasher is not malfunctioning. If your brake lights work fine, but not the signals (either direction,) then it's likely the flasher is burnt out. The flasher itself is located underneath the dash near where the steering column passes through the firewall

Mar 19, 2009 | 2000 Chevrolet Lumina

Not finding what you are looking for?
1997 Pontiac Bonneville Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...