Question about 2002 GMC Sonoma Extended Cab

1 Answer

How do you replace an ignition switch on a 2002 GMC Sonoma?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 347 Answers

Ok start with u need to pull steering wheel after u do that they are a steering wheel lock thing there neeed a screw driver or somthing like that u have to push down on that plate hard remove the snap ring then they are three screws holding the turn sig plate remove them and look at the end of switch should be a screw there take it out and switch will come out

Posted on Oct 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2.8l. How do I disassemble the fuse panel?


GMC Sonoma Maintenance & Repair Questions - CarGurus

www.cargurus.com > Questions > GMC > Sonoma

CarGurusGet fast answers to your GMC Sonoma Maintenance & Repair questions from experts in the CarGurus ... My 1999 Gmc Sonoma 4.3 Will Start But Will Stay Running ...1991 gmc sonoma 2.8 l v6 changed everything in the fuel and ignition system except for the ... Why Is The Engien Dying When The Ecm-batt Fuse Burns Out?

can you bypass the fuel pump relay on a 1997 gmc sonoma

www.cargurus.com > Questions > GMC > Sonoma

CarGurusAug 7, 2014 - can you bypass the fuel pump relay on a 1997 gmc sonoma - I have no power at the pump. can i run a new positive lead from the fuse box straight to the pump... ... Question type: Maintenance & Repair ... 1991 gmc sonoma 2.8 l v6 changed everything in the fuel and ignition system except for the spark ...

GMC Sonoma Questions - wiring diagram for a 1995 gmc ...

images for 1991 chevy s10 wiring

Dec 12, 2015 | 1991 GMC Sonoma

1 Answer

On a 2000 GMC Sonoma, I have lights and dash lights, but no gauges work and it doesn't start?


The ignition switch:

97 Blazer strating problem no lights or power to dash ...

? 1:53
www.youtube.com/watch?v=C_7eAb1Y-ms
Dec 9, 2011 - Uploaded by greencaddi505 If you have no power to the dash when your key most likey it is your igntion switch. ... come on the head lights dont work or the horn i have no power at all do you think ... I had no power or light to the dash, and the engine did not start. ... Ignition Switch Replace - GMC Jimmy / S-10 / Hombre / Sonoma / Envoy ...

Sep 15, 2015 | GMC Sonoma Cars & Trucks

1 Answer

Gmc sonama replaced ignition switch now wont start


Yes, if you did not have a key made to fit the new lock that matches the old chip.

Jul 03, 2013 | 1996 GMC Sonoma

1 Answer

1994 sonoma fuel pump continues to run with engine off


Replace the ignition Switch. Not the ignition lock cylinder.

Oct 22, 2011 | 1994 GMC Sonoma

1 Answer

02 gmc sanoma turns over but doesn't fire I replaced distributer,rotor,plugs,ignition coil,fuel filter, and the fuel pump turns on and the gas is getting to the fuel rails near the feul pressure sensor.


Check to see if you have compression on all cylinders. If you don't, replace the timing chain/belt. If you do check the ignition relay and fuse panel for blown fuses.

Oct 11, 2010 | 2002 GMC Sonoma Extended Cab

1 Answer

How to change ignition switch on 1992 gmc sonoma


Remove the kick panel covers, the lower portion of the dash, remove the lower half of the covers on the steering column. You will have to cut about 3 or 4 wire ties.

You will need a special tool to remove the bolts from the existing ignition switch, (it looks like a reverse torx screw). To remove the other end of the existing Ignition switch cable you will need a nut driver to remove the connector.

Remove the two additional connectors on the outside of the connection. Re-install the additional connectors onto the new switch harness. Connect the adaptor and tighten the bolt. install the switch and tie the harness back into place. replace the cover and Dash panels.

Apr 10, 2010 | 1992 GMC Sonoma

1 Answer

02 gmc sonoma want crank.has new battery,new fuel filter,and two new 02 sensors.any suggestions


k, not cranking, is the battery good, if yes you could try to jump the starter and see if it cranks, if not you could pull it and have it tested. If the starter is good, might be the ignition switch.

Apr 10, 2010 | 2002 GMC Sonoma Extended Cab

1 Answer

How hard is it to put a new starter on a 2002 Gmc Sonoma


The procedure to replace a starter is given below:
  1. Disconnect negative (black) battery cable.
  2. Jack up the Truck on stands.
  3. Remove front right tire.
  4. Access starter from wheel well.
  5. Remove cable from ignition and positive cable coming from battery.
  6. Crawl under the passengerside near the front wheel remove two bolts on the starter. pull starter out from wheel well.
  7. Installation is reverse.
  8. You can possibly do the above from underneath the vehicle, but not sure if starter will drop down.

Sep 20, 2009 | 2002 GMC Sonoma Extended Cab

1 Answer

1995 gmc sonoma ignition key worn out


You have to remove the stering colum covers and in the ingnition key drum on the side there is a little hole, press the inside pin and pull the key ccylinder out, you can buy on autozone or pep boys.

Jul 18, 2009 | 1995 GMC Sonoma

1 Answer

Rajak2009's reply: replace ignition cylinder. how to take it out


well you can try using a very small paper clip or the like and try to pry it out or you'll have to remove the ignition switch. a haynes auto repair manual at any auto parts store for 17$ will explain in detail.

Jul 01, 2009 | 1992 GMC Sonoma

Not finding what you are looking for?
2002 GMC Sonoma Extended Cab Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...