Question about 2004 Buick LeSabre
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: A/C BLOWER WILL NOT TURN
The problem on your vehicle is .
THE BLOWER MOTOR RESISTOR..
when they come damaged the blower motor not work. or don't stop working.
just REPLACE the RESISTOR. and you will fix that problem.
I'm a mechanic for a few years. and have autorepair software
On my PC.
OK... I hope with this information you will fix the problem.
Thank's for use fixya.
Posted on Jul 25, 2008
Disconnect your negative battery cable. Locate and remove
the screws that hold your interior door handles in place (they may be hidden by
snap in, or snap on clips). Remove the interior door handles, then disconnect
the wire clips to the switches. Your panel is held in place by snap in clips;
use a small pry bar to pull them from the door (try to get as close to, or
directly under the clips to prevent them from tearing out of the door panel).
Once the clips are pulled, pull the panel upward to remove it from the door.
Install in reverse.
If you don't have power windows you will have to remove the manual window crank. It is held in place by a clip on the back side of the base. To remove the clip, you will need a small hook (kind of like a knitting needle). Put the hook in behind the base, and grab the clip and pull it off. To replace it, slide the clip back on the window crank, and snap it back on the door.
Posted on May 25, 2009
I just Replaced a Low Beam Light bulb on a 2005 Buick La Sabre.
If You use a Metric socket and Remove the Two Silver bolts Attaching the headlight Assemble onto the metal surrounding the the lamp assembly it comes out to the front. This makes it much easier to access the bulb. Twist it counerclockwise & it comes out by pulling gently on the bulb. Then by realeasing a tab that is the socket holder bulb can be removed & replaced with a New #9006 low beam halogen light bulb. Wrap a Paper towel around the bulb & do NOT touch it with your bare hand as this wiil ruin a halogen bulb,
Posted on Jul 23, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
Tips for a great answer:
Nov 02, 2017 | 2004 Buick Century
Oct 25, 2013 | 2004 Buick LeSabre
Oct 22, 2017 | 2005 Buick LeSabre
Dec 02, 2010 | 1997 Buick LeSabre
Mar 27, 2010 | 1993 Buick LeSabre
Feb 16, 2009 | 2004 Buick LeSabre
Dec 25, 2008 | 1998 Buick LeSabre
Dec 16, 2008 | 1998 Buick LeSabre
Sep 01, 2008 | 1995 Buick LeSabre
281 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: