Question about 2004 Ford F150

1 Answer

Motor dies when I can to a stop - 2004 Ford F150

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 75,797 Answers

Do the following procedure to cure parobelm, this works.
, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dies out when stopping or idling


4.9 clean throlle body / tps adjustment and or replace / minuim idle air adjustment and idle control motor adjustment and or replace
4.6 clean throlle body /adjust idle control motor and or replace

Jan 14, 2014 | 1994 Cadillac Seville

1 Answer

You asked: My car was running find, a little rough. Took it to a friend to have the spark plug changed and wires. Degreaser was sprayed on motor then rinsed with water when done driving home about 1 mile,...


Try cleaning the throttle valve and idle speed control motor with throttle valve cleaner and then diconnect the battery for 5 minutes and drive it for a few days.

Apr 21, 2013 | Ford Escort Cars & Trucks

1 Answer

1990 toyota pickup v6 starts-up step on gas pedel motor then dies


does thr engine rev upwhen started than idels back down.try idel control switch and map sensor

Oct 27, 2012 | Cars & Trucks

2 Answers

I have a 95 firebird formula LT1 that will sputter and want to die. This will only happen if I drive for about 30 minutes then stop and shut off the car for 15 minutes. Once I start it after that it bogs...


map censor... manafold absolute pressure censor.. the mecanics have a hard time finding this censor it is secondary to the motor circuts but it will cause the motor to die then restart in a short time...$30.00 autozone

Jul 07, 2009 | Pontiac Firebird Cars & Trucks

1 Answer

GMC Envoy A/C Problem


I'd remove my idle air control (IAC) motor, and clean it & re-install to see if that helps. Use throttle body cleaner on pointed part of motor (pintle) and shaft , as well as spray into hole (port) it came out of . If it helps for a while, then start to do it again, I'd replace the idle Air control motor.

May 31, 2009 | 2003 GMC Envoy

2 Answers

Rough idle will die at lights and stop signs


Check the intake manifold gaskets for a vacuum leak.

Apr 24, 2009 | 2000 Honda Passport

2 Answers

Dying 2001ford explorer sports trac


I had the same problem. I would get to a red light or stop sign, and my tach would go to 1000, then 500 then, if I didn't rev the motor, it would die. It turned out to be a vacuum leak. A rubber elbow shaped 1" line on the top of the motor, toward the front, but underneath the black plastic linkage cover (3 screws to remove). I don't hear that well, but I had a friend listen, and he could hear the sucking/hissing sound. The rubber elbow slides over two pipes; one that is going to the front of the vehicle, then turns right and connects to a second pipe going to the driver's side. If not this line, look for others. Good luck!

Mar 15, 2009 | 2001 Ford Explorer Sport Trac

1 Answer

Motor stalls out and wont idle


check for vacuum leaks if none replace the idle air control motor

Sep 26, 2008 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Ford F150 Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...