Question about 1995 Eagle Vision

1 Answer

95 eagle vision esi, where is the crank sensor located? I've replaced the cam sensor, no problem but I can't find the crank sensor. Anyone can point out where to find?

Posted by on

  • Alfredo DaSilva
    Alfredo DaSilva Oct 07, 2009

    Thanks for the info. Chrysler recommended replacing the Crank Sendor as well as other parts and they now been replaced However, it didn't fix the problem. I'm still having trouble starting the car after it has sits for about 2 hours. I have to let it crank for about 30 or so seconds for the engine to start or if the car has been sitting all night, then it no problem starting again. It just acts up between 2 and 6/8 hrs after i've driven and parked it. Chrysler and others have no clue.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 153 Answers

The Crankshaft Position Sensor is mounted on the transmission bellhousing

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 91 eagle talon won't get a spark it just cranks


try crank position sensor.cam sensors are mostly for monitoring misfires. cam sensor doesnt determine spark timing

Dec 17, 2011 | 1991 Eagle Talon

1 Answer

I need to know where the bcm on 95 eagle vision esi is located?


this is not your problem it is right beside the relay fuse box under the hood

Jul 13, 2011 | Eagle Vision Cars & Trucks

1 Answer

I need to know where the started is located on my 95 Eagle Summit ESI 1.8L motor and manual transmission


YOU NEED TO REMOVE THE WHOLE AIR CLEANER UNIT WITH AIR FLOW SENSOR.FIRST DISCONNECT AIR FLOW SENSOR BE CAREFUL NOT TO DAMAGE AIR FLOW SENSOR WHEN REMOVING AIR CLEANER COVER BECAUSE AIR FLOW SENSOR CONNECTED TO COVER. YOU HAVE TO REMOVE AIR CLEANER ASSEMBLY BEFORE YOU CAN SEE THE STARTER.

May 13, 2011 | Eagle Summit Cars & Trucks

1 Answer

Ok so the heater blower and the power windows dont work on 95 eagle vision esi..is there a hidden reason why they both are out as i can seem to locate a fuse probluem .. need the windows and heat for...


THE BLOWN FUSE MAY BE HEATER, AND THERE MAY BE A PROBLEM WITH THE WIRING IN YOUR DRIVERS DOOR PANEL AS THIS CONTROLS WINDOWS , CHECK FOR LOOSE CONECTIONS AND MOTOR WIRING.

Oct 22, 2009 | Eagle Vision Cars & Trucks

1 Answer

I need the location on a tempature sensor


it is around the thermostat just a little plug type thing with 1 wire on it

Sep 04, 2009 | 1995 Eagle Vision

1 Answer

95 Eagle Summit 1.8L cam timing marks


get a repair manual there must be a mark or reference point of some kind

Jul 02, 2009 | 1995 Eagle Summit

2 Answers

Glove box door will not manualy open


One thing to realy look at is if there is anything behind the glovebox like papers. I had it happen to me and that is what it was

Sep 05, 2008 | 1995 Eagle Vision

2 Answers

1995 Eagle Talon Will not start


check the mass air flow sensor, if this is bad then the ecu wont get a signal and it wont send the right amount of fuel to the cylinders causing a no start condition

Jun 25, 2008 | 1995 Eagle Talon

Not finding what you are looking for?
1995 Eagle Vision Logo

496 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Stewart Dibbs

Level 2 Expert

322 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...