Question about 2000 Audi A4

1 Answer

What brake fluid do i need for audi 2.5 tdi 2000

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,874 Answers

VW-AUDI compatible brake fluid norm DOT 4 (Castrol, ATE, Mobil, ...)

Posted on Oct 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Leaking fluid around left front wheel of 2001 Audi A6


If it is near the tire it is brake fluid. The brake fluid reservoir is back by the firewall driver side of engine compartment. Your car uses DOT 4 brake fluid.

Feb 13, 2014 | Audi A6 Cars & Trucks

1 Answer

Where does the power steering fluid go in a audi a4 1996 1.6 petrol and where does the brake fluid go cheers


the brake fluid reservoir is on the bulkhead at the bottom of the screen(i think cap colour yellow) and the power steering fluid goes into the cap marked pas(cap colour black)located at the side of the engine at the front of the engine bay.

Aug 05, 2010 | 2000 Audi A4

1 Answer

I changed the rear brakes on my Jetta tdi and now the brake pedal goes all the way to the floor. It does stop eventually and the parking brakes work. But it stops poorly


you probably have air in the line after brakes are done refill resevoir with brake fluid then the caliper has a little screw for bleeding brakes you must pump brakes 2-3 times leave your foot down until you have someone else open the screw on the caliper to release air or sometimes brake fluid close screw and repeat until the petal gets hard again do it to both rear brakes see if this works..

Mar 21, 2010 | 2000 Volkswagen Jetta TDI

1 Answer

My 04 passat keeps aplying its breaks its self


if there is too much brake fluid in the master cylinder this as it heats up will expand causing brakes to drag reason 2 if power brake booster is faulty will **** brake pedal down hope this is help full

Mar 12, 2010 | 2000 Volkswagen Passat 4Motion

2 Answers

Audi A4 2000,1,9 TDI,Oil type


The best oil for A4 2000, 1.9 TDI, 85 kW, is CASTROL 0W30 SLX Longlife II (TDI Pump Nozzle) VW Norm 506.01 . This oil is issued by Castrol special for TDI - Pumpe Duse (Pump Nozzle) engine as longlife oil (50,000 km service interval, or two years).
Also a normal service oil (15,000 kmservice interval, or one year) is Castrol TXT 5W40, and Castrol EDGE 5W30, for TDI Pump Nozzle engines, VW Norm 505.01.

Feb 22, 2010 | 2000 Audi A4

1 Answer

Wondering how to bleed rear barkes and calipers on


If you have two people.....press brake pedal...open bleeder screw then close, release brake...repeat until you hear no air bubbles. Fluid will comes out of bleeder. do not reuse. Brake fluid must be clean.
Do one brake at a time. You should feel normal pedal pressure when complete.
If you are by yourself, you can put tubing over the bleeder screw and insert into a small bottle to catch the fluid, and create a air tight seal. It is called a one man bleeder kit.
One other way, is to use a hand vaccum pump to **** to fluid through the lines.
Good Luck! It is easy as pie.

Feb 14, 2010 | 2000 Volkswagen Jetta TDI

1 Answer

My Audi A4 2000 TDI year 2005 has run on two tanks of Bio fuel recently and it hasn't recovered... started stuttering. Fuel system has been flushed out, air flow mand air flow meter has been changed but...


Audi 1.9 TDI and 2.0 TDI engines with pump-nozzle injection system, (year 2005 included), don't have permission to run with Bio fuel !!!
First you must replace fuel filter, interflow a quality Diesel additive (for 60 liters Diesel fuel dosage) fill up tank with Diesel fuel and run at least 300 km on highway at 3000-3500 rpm in 4-th gear.
I recommend you Foerch Diesel Reiniger System additive! I use this additive from 3 years ago and is certified on Audi TDI engines!

Dec 04, 2009 | 2000 Audi A4

1 Answer

Alarm oil sensor in my Audi A6 1,9 tdi -2000.


sounds like a faulty oil level sensor i,v replaced them in the past you need to get it checked first because the sensors aren,t cheap

Aug 02, 2009 | 2000 Audi A6

1 Answer

How to change front break pads A4 2000 and what type/ make of pads do i need


I have the same car 2000 Audi A4. I recommend you "TRW" brake pads. First you must verify yours front brake disc diameter: 280 mm or 288 mm. (On my car y have 288 mm). After that you can buy the brake pads (with wear sensor). For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow: 1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose! 2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper. 3. Now you must thoroughly clean the brake calipers (free of grease). 4. Remove outer brake pad from brake carrier. 5. Pull inner brake pad out of brake caliper piston. 6. Check up the brake fluid level on the reservor, and emptying if neccessary! 7. Push piston back into brake caliper housing. 8. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward). 9. Install outer brake pad into brake carrier. 10. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm. 11. Install both caps. 12. Insert retaining spring into brake caliper housing. Important: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!! Check brake fluid level and top up if neccessary!!! Please Rate my Response! Thanks!

Mar 02, 2009 | 2000 Audi A4

Not finding what you are looking for?
2000 Audi A4 Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14333 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...