Question about 1991 Chevrolet S-10 Blazer

1 Answer

Need to replacedash light bulb

Need to replace dash light bulb

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

This is easier than you may think it is, simply unscrew your rear defroster, and power mirror controls from the left and right of the bezel around the guadge cluster, pull out your heat/A-C pannel, and pull out your headlight/4WD pannel. there are four nuts on somewhat long bolts at the four corners of the bezel remove these and remove bezel, once this is done there should be four more behind where those were they are very thin looking and unlike normal nuts remove these also and the guadge cluster should slide right out, to replace to stock bulb type simply twist bulbs out and ask for replacements at your local auto part store, if you want to convert your backlight to LED (which gives it a mutch cleaner look at night) go to your nearest radioshack, AutoZone, Kragen, or any auto parts store and buy the desired amount needed. Good Luck

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My tail lights are not working on my 2000 jetta the front lights work the break lights work and the blinkers work all inside lights work just fine


you need new bulbs in tail lights one bulb in each side has two elements one works brake other works running lights the elements in the bulb for tail lites are bad . so just replace bulbs. hope this helps.

Sep 13, 2011 | 2002 Volkswagen Jetta TDI

2 Answers

How do you change dash lights


Dash lights are replaced from the rear of the cluster or control thats out, take note that some of these newwer cars and trucks have clusters that the bulbs are part of the electronic curcuit boad and cant be replaced, the whole unit would need to be replaced, this is something you wont know until the cluster is removed, there are many lights behind the cluster, a trick i learned is to remove a bulb you untwist it and it pops out, then pull the bulb from the socket and install a new bulb into socket, then line up slots on socket push in and twist to lock, the trick is there are a lot of bulbs so remove the bulb and then shine a liight throuh the hole and look at the front of the cluster to see if its a night light or a symbol to see if its the correct light. hope this helps, good luck.

Nov 08, 2010 | 1998 Ford Explorer

2 Answers

1988 pathfinder no dash lights no revers lights no tail lights no gaiges


If they all stopped working at the same time then it is probably a fuse or possibly 2. Check your fuse panels in the dash and under the hood. The dash lights and gauges should be a fuse labeled instrument cluster or guages, it is probably blown. The other fuse to look for will be the tail light fuse. This is where I would begin.

Sep 23, 2010 | 1988 Nissan Pathfinder

1 Answer

Dash lights


sounds like you need to replace the board that the bulbs fit into

Aug 11, 2009 | 1992 Chevrolet K1500

1 Answer

Can't remove dash from 1990 toyota celica to replace dash bulbs


hi i had d same problem with my gt4,i lightly wedged a piece of hard plastic between any gap n popped open the clips,be careful tho

Jun 24, 2009 | 1990 Toyota Celica

3 Answers

1994 Acura vigor gear indicator light won't light D4. All other gear indicator lights work. Happened after replacing two dash lights


WHILE REPLACEING OTHER DASH LIGHT BULBS THE JOSTLING JUST BURNT OUT THE ALREADY CLOSE TO FAILING D4 BULB.

Jun 14, 2009 | 1992 Acura Vigor

1 Answer

On my 2000 honda accord the dash lights will not work.


make sure that they are securly connected...maybe there is a bad connection

Mar 31, 2009 | 2000 Honda Accord

1 Answer

How do you replace the light bulbs on the dash heater control


u must pull the entire cluster out to replace the bulbs.

Jan 29, 2009 | 2003 Kia Sorento

1 Answer

Replace Dash light bulbs on 2004 Malibu Maxx


you need to take the hole dash out and on the back of the speed dash there are little bulbs take them out then replace them

Dec 30, 2008 | 2005 Chevrolet Malibu

1 Answer

The dash board panel lights are out for the most part. The speedo is 1/2 iluminated. Could this be a fuse ? If not, how involved is it to change the lights?


i think it could be bulb issue.

you have to remove the dash board and replace bulbs that are busted. replacing the bulb is no problem . the problem is taking the dash off. need to remove the dash cover first before you can remove the actual dash.

another thing to consider is the speedometer cable which is attached at the center of the gauge.

tnx 4 using fixya,

drcool

Oct 28, 2008 | 2006 Toyota Sequoia

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...