Question about 2003 Toyota Camry

Open Question

I recently had a rear brake job on my 2003 camry (v6).Since then my ABS and emergency brake light come on after I start driving a few Km. When I stop the lights go out but when I start driving again the lights come back on after only a few minutes. A friend at a garage checked the flashing code and the abs lights flashed 3 times pause, 3 times pause, 3 times pause, and then 9 times. Does anyone know what this code means?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Abs problem on 2007 toyota yaris

first checked with scanner to retrieve codes. Im a toyota technician and the most problem for yaris with abs is the rear wheel sensor wire
harness connector.

Posted on Jan 24, 2009

  • 1 Answer

SOURCE: ABS BRAKE LIGHT ON IN MY SUBURBAN/GMC TRUCK

Try diconnecting the battery for a minute or so, then reconnect it. the computer should reset itself, and hopefully the light will go out.

Posted on Aug 22, 2008

erietrack
  • 37 Answers

SOURCE: bleeding abs brakes

Try using a pressure bleeder. It will force the air out. Works every time.

Posted on Nov 08, 2008

  • 341 Answers

SOURCE: ABS Light On

you can take it to autozone they will check it for free and tell you what the problem is and which sensor and which wheel its on ...that way a shop cant tell you you need other parts you dont need. hopes this helps.........

Posted on Dec 10, 2008

pippall
  • 1486 Answers

SOURCE: 2007 toyota camry abs & brake lights on

Remove the abs plugs and dry out connections, and replace.Remove the battery wires before you do this.

Posted on Jul 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause the Emergency Brake light to not go off when the emergency light is released? What causes the ABS warning light to come on?


When I had that problem with the emergency light it was the sensor for emergency brake
The abs and brakes sounds like you are loosing pressure in the system

Apr 18, 2015 | 2004 Toyota Prius

1 Answer

Right rear tire is locked up


Hello,
If you are unable to fix yourself, than yes you can drive it to local shop. You still have front brakes working.
If you can repair yourself start by removing rear tire than brake drum and look for broken parts. Most likely they will fall out when you remove drum.
Replace worn or broken parts which are inexpensive for your car.
Check for leaking fluid from broken break lines and check fluid level under hood. Keep me informed N I'll help. Paul

Jan 16, 2013 | 2003 Buick LeSabre

1 Answer

2003 sport trac actuates abs at 2 mph on easy stops abs light is not on


Wayne, I would start with the brake wheel sensors, most likely the front end- I would start there first.
Has this vehicle had brake pads replaced, or had recent brake work? If so, what was done, and by who? (home job, or brake shop?)

Sep 10, 2012 | 2003 Ford Explorer Sport Trac

1 Answer

2002 Toyota Camry , no abs and new rotors and pads, 155,000 km. Initially when driving the car, the pedal feel goes down smooth. After a few more braking while driving, the pedal feel goes down jittery....


Although the toyota mechanics could eventually be right, your car is exhibiting all the signs of air in the brake lines. This is especially common after a recent brake job. Some mechanics merely push back the calipers to keep pressure on the brake lines and don't bother to bleed the lines. This works most of the time but the only true way to ensure there's no air in the lines is to bleed them. After having the brakes bled, if you are still having the same issue, I'd say it would be related to the master cylinder but I'd never replace it or any related component without first ruling out air in the lines. I hope this helps answer your question. Best of luck!
Greg

Aug 14, 2011 | 2002 Toyota Camry

1 Answer

When the anti lock brake light on my 93 lincoln town car comes on, if I am pressing on the brake at the time, makes the brakes grab. It also happens just before the light comes on. I have had the front and...


the abs light on the dash should come on when the abs is working (emergency braking)if it comes on when braking normally(gently)chances are a sensor is gone(replace in pairs,fronts & rears)
abs stops the wheels from locking up in an emergency brake situation,you will feel the grab-release,grab-release on the brake pedal......

Jul 16, 2010 | 1993 Lincoln Town Car

1 Answer

I have a 94 Camry V6. Brake light went on about a


Hi:
All modern cars have a dual brake system, this way if you would happen to spring a leak in your rear brakes, your front brakes still work. When one system fails, you get a brake light. In your case, the first place to start your troubleshooting is to check the fluid level in the brake reservoir. If either the front or back of the reservoir is empty, you have a leak. If both are still full, the most likely problem is your master cylinder failing. If you think you have a leak, look at the inside edges of all 4 wheels, and look for signs of brake fluid .

Nov 17, 2009 | 1994 Toyota Camry

2 Answers

The abs light remains on


are all the tires same size. Inflated to the same PSI. How did you check the sensors, Did you ohm them. they should be the same. Still did you drive the car to make sure all the sensors still read the same as you speed up. You need a scanner for this. When you clear the light does it come on right away before you roll. If so you prabably need to get the control module rebuilt. If it comes on after you start rolling then its most likely a sensor.

Aug 07, 2009 | 2000 Ford Focus

1 Answer

Abs problem on 2007 toyota yaris


first checked with scanner to retrieve codes. Im a toyota technician and the most problem for yaris with abs is the rear wheel sensor wire
harness connector.

Dec 14, 2008 | 2007 Toyota Yaris

1 Answer

Replaced rear brakes, Alarms still active


i have a 2003 toyota 4-runner my brake and abs vsc are on and it has a beeping loud noise.....what do u think is the problem?

Aug 21, 2008 | 2003 Toyota 4Runner

Not finding what you are looking for?
2003 Toyota Camry Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...