Question about 1997 Pontiac Sunfire

1 Answer

Have to replace the heater core on a 1997 Pot.

Have to replace the heater core on a 1997 Pontaic.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 713 Answers

This is a fairly easy fix. Disconnect the heater hoses under the hood. Go to passenger side under the dash remove the lower panel from the dash to access the heater box. Unplug any and all connections on the lower half of the heater box and remove the lower half of the box should be about six screws you should see the heater core and the evaporator core. Heater core skinnier of the two should have one or two straps holding it in remove the straps and remove the core and replace.

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i bleed heater


1997 Oldsmobile Bravada heater core removal - YouTube

? 3:22
www.youtube.com/watch?v=7OwIuiYqt0s

Oct 25, 2012 - Uploaded by Lloyd Ankney
1997 Oldsmobile Bravada heater core removal ... How can I replace a blend door actuator on a 99 Bravada? .... Heater core replacement 2000 S10 4.3L ( slideshow picture ) - Duration: 3:52. by Joe Lleras 169,585 views. 3:52.

Oldsmobile bleed air in heater core Cars & Trucks ... - Fixya

www.fixya.com > Forum > Tags > bleed air in heater core > Cars & Trucks
If your cooling system has any bleed screws incorporated, crack them once in a while as well. 2000 Oldsmobile Bravada heater blows cold air. Had a new heater .

Oct 25, 2015 | 2000 Oldsmobile Bravada

1 Answer

Heater core 1997 lss olsmobile


Click here to see how to replace your heater core.

Dec 30, 2012 | 1997 Oldsmobile LSS

1 Answer

I put a new heater core in a pontaic gram am 1996 , and the konb will not go to the heating side of the control why ?


If this was not an issue befor you replaced the heater core, you may have restricted the blend door, which is what cause you to switch between hot and cold settings. Sorry to say, but you may have to open the case again to figure this one out.

Oct 28, 2011 | Cars & Trucks

1 Answer

How to inestol heater core for 1997 ford windstar 3.0


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Jan 07, 2011 | 1997 Ford Windstar

1 Answer

Need to replace heater core on 1997 Chevy Lumina


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 23, 2010 | 1997 Chevrolet Lumina

2 Answers

My heat or my air doesn't work in my 1995 Pontiac Bonneville but it blows good. What could be the issue?


my 2004 pontaic bonneville the heater hoses going into and out from the heater core are hot , but the heater blow cold air. ,

Oct 16, 2009 | Pontiac Bonneville Cars & Trucks

2 Answers

How do ypou remove heater core on a 1997 gmc


If yoou are working on a 1997 GMC Jimmy S or T-10 the assembly must come out to access heater box removal to replace heater core.

Aug 23, 2009 | 1997 GMC Jimmy

1 Answer

How do i replace the heater core for a 1994 pontaic sunbird


You will need to pull the dash assembly away from the firewall slightly and remove duct work from heater case on right (passenger)side then the heater core cover,the 2 bands that secure heater core,drain cooling system,remove the 2hoses,and swop out old heater core.

Aug 23, 2009 | 1994 Pontiac Sunbird

1 Answer

Problems with locating heater core in 1997 oldsmobile achievea


U must remove the entire dash to service the heater core, once the dash is out then the heater core case must be split to get core out.

May 19, 2009 | 1997 Oldsmobile Achieva

Not finding what you are looking for?
1997 Pontiac Sunfire Logo

Related Topics:

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...