Question about 2005 Chevrolet Malibu
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Oct 05, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 08, 2013 | Chevrolet Malibu Cars & Trucks
Aug 23, 2010 | 2004 Hyundai Elantra
Nov 12, 2009 | 2005 Chevrolet Colorado
Oct 05, 2009 | 2005 Nissan Altima
Sep 26, 2009 | 2005 Audi S4
Sep 07, 2009 | 2005 Pontiac Grand Prix
Jul 02, 2009 | 2005 Chevrolet Express
Jun 15, 2009 | 2005 Chevrolet Colorado
Jun 02, 2009 | 2005 Chevrolet Monte Carlo
Dec 31, 2008 | 2005 Volkswagen Passat
242 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: