Question about 1989 Buick Riviera

1 Answer

Need to find that compu. that controlls heater ,radio?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Buick Master
  • 1,564 Answers

Both these units are fed power through the same fuse. This is what you'll want to locate and replace. The lighter may also not be working as well. Thank you, Dana

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove a radio from a 1993 suzuki sidekick


well thats in the FSM. easy peasy
stock radio , we cant do non stock. (vast )
i guess step 4 is it?

heater control page.
  1. Disconnect the negative battery cable.
  2. If equipped, disable the air bag system. (skip)
  3. Carefully pull the knobs off of the control levers.
  4. On Sidekick, Tracker, Sidekick Sport and X-90 models, grasp the trim panel and pull it off of the instrument panel.
  5. stop.... here.
radio out
electronic version not analog
remove ash tray, and hidden tray screw and tray guide

  1. Pull the heater control lever knobs off of the levers.
  2. On 1996-98 models, separate the heater control trim panel from the control unit by pulling it straight away from the instrument panel. Allow the trim panel to hang loose.
  3. Open the ashtray, then depress the ashtray retainer and remove the ashtray from the sliding track. While it is removed from the vehicle, now would be a good time to wash it out.
  4. Loosen the two retaining screws, then remove the ashtray track from the instrument panel center trim bezel.
  5. On 1989-95 Sidekick and Tracker models, remove the trim panel (Bezel) by prying it carefully away from the instrument panel.
  6. On 1996-98 models, remove the center trim bezel from the instrument panel by loosening the four retaining screws and maneuvering the heater control trim through the appropriate hole. Set the bezel out of the way.
  7. Use a screwdriver to loosen the one rear mounting bracket-to-radio screw; access can be gained to this screw through the ashtray hole.
  8. Remove the four radio front retaining screws, then pull the radio out of the instrument panel just far enough so that the electrical connections on the rear of the radio can be accessed.
  9. Detach and label the wiring from the radio. Also, detach the antenna cable from the rear face of the radio
  10. pull radio. now. (if stock if not stock look for locks)


step 5
25477768-tiechxycrusckuccgw3t0yzs-2-0.jpg

Feb 25, 2015 | 1993 Suzuki Sidekick

Tip

How to change a heater control unit/heater control ford puma


Ford Puma

What you will need:-
1.Phillips Screw Driver
2.Depending on what stereo system you have, stereo removal keys.

REMOVAL AND INSTALLATION

Climate Control Assembly/heater control unit/

Removal
1. Standard preparatory measures

Make a note of the radio keycode.

Make a note of the preset radio stations.
CAUTION:
Disconnect the battery negative lead.
2. Remove the radio.
3. Note:The control unit for the heating/air conditioning system, all operating knobs and the air distribution operating switch make up one assembly.

Remove the bezel/control unit.

1 Remove the screws on the top of the unit

2 Unclip the clips either side of the unit

Pull the bezel/unit forwards.

Disconnect the plug.
4. Unclip the air distribution shaft.
5. Remove the heater/air conditioning module and the fan operating switch.

Installation
1. Refit the components in the reverse order.
2. Install the radio.
3. Connect the battery ground lead.

Enter the radio keycode.

Reprogramme the preset radio stations.

Reset the clock.

Carry out a road test to enable the PCM to collect data.
4. Check that the heater/air conditioning operates properly.

on Jan 31, 2010 | Ford Focus Cars & Trucks

1 Answer

Removing the cover from the radio and heater console


The bezel surrounding the radio and heater/AC controls is held on with 6 tension clips. It also has tabs at the top that are held under the adjacent horizontal trim pieces.

Remove the horizontal trim pieces on each side of the radio bezel using a small plastic pry tool. They will pop off fairly easily. Then simply use the pry tool to work your way around the radio bezel and pop it off as well. This will expose the heater control that you need to replace.

Mar 31, 2014 | 2005 Chevrolet Cobalt

2 Answers

Alero fuse 46 keeps blowing


I have seen this before were the 46 fuse keeps blowing and it is usually after somone has had the radio and heater control out. There should be 2 wire harnesses that plug into the back of the heater control but the 1 will fit the extra plug on the back of the radio and the customer had the heater harness pluged into the radio. Radio worked fine but the rear defogger and a few other heater controls did not and it would blow the 46 fuse as soon as the key is turned on,.

Dec 04, 2011 | 1999 Oldsmobile Alero

1 Answer

My vent is stuck on floor position and heater control assembly wont switch to dash were do i start to fix problem on 83 cutlass supreme


The thing to do is check for vacuum leaks. In the engine bay look for any "hoses" coming from the firewall. These are for the heater contols. If any of these are broke? Replace them . Have you installed a after market radio? Sometimes heater controlls get messed up. I would take the radio out and examine the heater controlls.

Jan 10, 2011 | 1983 Oldsmobile Cutlass Supreme

1 Answer

My heater blower was working on #3 setting but not any more so I think it may be the heater control switch. How can I get the face of the dash board off


Disconnect the battery ground lead.

  1. Remove the radio/cassette player and CD player (if fitted
  2. Remove the bezel with the heater/air conditioning control panel.
  3. Remove bezel with heater/air conditioning control panel .
Remove the heater/air conditioning control panel from the bezel
0214260.gif
19d9385.gif
e662ada.gif

you will need this tool shown below to remove the factory radio
af4e1b9.gif

Oct 18, 2010 | 2000 Ford Focus

2 Answers

The controls on the steering wheel stopped working and the radio doesnt work either


Replace the clock spring under steering wheel, if applicable to your vehicle

May 06, 2010 | 1995 Buick Riviera

1 Answer

I have a 1996 Cadillac Seville SLS and I want to remove the radio and a website said I would just have to pull the trim around the radio and heater out and it would expose screws that would allow me to...


  • Remove the heater and A/C control and radio bracket fasteners.
  • Partially remove the radio and A/C control assembly.
  • Disconnect the electrical connectors from the radio and A/C control assembly.
  • Remove the radio and A/C control assembly.

  • 288103.gif
    tif.gif
  • Remove the radio retaining nuts.
  • Remove the radio from the radio bracket.
  • Installation Procedure Install the radio to the radio bracket.

    288103.gif

      tif.gif
      Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
    Install the radio retaining nuts.
      Tighten
      Tighten the radio retaining nuts to 10 N·m (88 lb in).

      287815.gif
      tif.gif
    Partially install the radio and A/C control assembly.
    Connect the electrical connectors to the radio and A/C control assembly.
    Install the radio and A/C control assembly.
    Install the heater and A/C control and radio bracket fasteners.
    Install the console trim plate. Refer to Console Trim Plate Replacement in Instrument Panel, Gauges and Console.
    Install the instrument panel center trim plate. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gauges and Console.

    Jun 29, 2009 | 2001 Cadillac DeVille

    3 Answers

    Car proplem


    1111 then hit the sell button and it should say good and come on

    Jun 06, 2008 | 2002 Kia Spectra

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    109 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8499 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...