Question about 2007 GMC Yukon

Open Question

Steering wheel lights out on both sides of steering wheel fuse checked ok

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: No power on my radio

correction: I have NO power, sorry

Posted on Aug 10, 2008

  • 436 Answers

SOURCE: the horn and cruise control doesn't work,fuses are

the horn input to ground is located in the cruise control module. if they both don't work then your cruise control module or the clockspring coil for the steering wheel needs to be replaced. If airbag lights is on as well then I would change the clockspring coil first.

Posted on Oct 02, 2009

  • 181 Answers

SOURCE: the underside of steering wheel stereo adjustments

somewhere the wires to and from the radio are not connected ,need to check the controls in the steering wheel, it might be loose? and the back of the radio!!!

Posted on Oct 30, 2009

iadame
  • 676 Answers

SOURCE: 2004 Kia Optima EX...Brake lights suddenly don't

You can check to make sure that the taillights have a good ground. If at all possible try using a test light or multimeter at the light. Have someone step on the brake and see if you have positive voltage to the light. If you do then it could be a faulty ground. If you don't move closer to the brake switch or even test the brake switch.

Posted on Nov 06, 2009

  • 8404 Answers

SOURCE: horn not working. fuse and relay ok. how can the

Check your ground wiper on the steering column.

Posted on Jan 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why don't low beams work?


As well as fuses there are relays in the under hood fuse box. They are square and about an inch and a half high. Make sure they are seated OK.

Right hand side in the image

https://motogurumag.com/i/hyundai-elantra-fuse-box-diagram-XfeNxpu.gif

Dec 28, 2015 | 2001 Hyundai Elantra

1 Answer

Why are the lights on my steering wheel not operating?


There is a 2 amp fuse some where on the steering column that power for the lights goes through .Steering column fuse holder Chevy calls it . check the fuse ! If fuse is check for B+ on both sides

Dec 28, 2015 | 2005 Chevrolet Silverado

1 Answer

Find the interior fuse box on an Australian 1998 Hyundai Sonata? There should be a panel with a clip out door near/under the steering column put mine does not have one, it is solid plastic panels both


No promises but this is the only reference I could find for Hyundai where the fuse box was not behind a panel to the bottom side of steering wheel. It may inspire you to look elsewhere behind items. Good Luck.

"The interior fuse panel is located behind the coin holder pull out drawer, which is on the lower left side of the dashboard"

Feb 03, 2015 | Hyundai Motor 1998 Sonata

1 Answer

Turn signals and brake lights won't function


GET A GOOD FUSE TESTER, TEST EACH FUSE. THERE ARE 2 FUSEBOXES. ONE UNDER THE HOOD & ONE IN THE DASH. ALL FUSES CAN BE TESTED WHILE STILL IN PLACE. THERE ARE TEST POINTS FACING OUT. TURN ON IGNITION SWITCH FOR THIS TEST. POWER ON 1 SIDE, BAD FUSE POWER ON BOTH SIDES, GOOD FUSE. POWER ON NEITHER SIDE, SPARE FUSE.

IF ALL FUSES RELATED TO THIS PROBLEM TEST OK, CHECK OR REPLACE THE TURN/SIGNAL/HAZARD FLASHER, { LOCATED UNDER DASH, NEAR STEERING COLUMN, PROBABLY SQUARE & BLACK. IF THAT'S OK, IT WILL HAVE TO BE THE TURN SIGNAL/ HAZARD SWITCH. ALSO CALLED COMBINATION SWITCH. REMOVE THE PLASTIC HOUSING AROUND THE STEERING COLUMN UNDER THE STEERING WHEEL. IT LOOKS LIKE THE AIRBAG & A LOT OF SPECIALIZED TOOLS WILL BE NEEDED. YOU MAY HAVE TO EMPLOY A RELIABLE SHOP IF THE COMBINATION SWITCH IS THE PROBLEM

Jan 10, 2011 | 1996 Chevrolet Cavalier

3 Answers

I have a 1989 Buick Park avenue. A month ago all of the back lights stopped working. Tail lights, brake lights, reverse lights.


Check your fuses underneath the drivers side steering wheel. Flip the plastic cover over and there will be a diagram showing the fuse that controls the taillights/stoplamp. Pull the fuse out and replace it with the same number fuse and your taillights and brake lights will work again. If the fuses are ok, pull each taillight bulb out and replace it with a new bulb. Sometimes when one light bulb fails, all of them will fail.

Aug 01, 2010 | Buick Park Avenue Cars & Trucks

1 Answer

My signal lights are not working but my hazard lights do


two different switches involved here even though they go to the same lights. check fuses check bulbs if ok then probably switch which is under steering wheel and requires pulling steering wheel to gain access. Hope this helps some and good luck

Apr 29, 2010 | 1992 Ford Mustang

3 Answers

Hi, I replaced the high beam bulbs but the lights still aren't working


could be a fuse, a relay or possibly your light switch in the car is malfunctioning .
also check the dimmer switch if every thing seems fine.it has to be checked with a meter and continuity tester.
its a minor problem of a short or loose wire but it has to be checked.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Mar 14, 2010 | 2005 Mazda 3

1 Answer

I have a 2001 and the horn stopped working at the steering wheel


check for power at horn when pressing horn button with test light no power check fuses fuses ok check buttons or steering wheel area
clock coil could be broken if has drivers air bag

Jun 24, 2009 | 2001 Daewoo Leganza

1 Answer

2004 chevy impala no headlights


there's a button on the right side of the steering wheel that says serv push that button. It's put right there for when they use them as police cars you can cut the headlights off. You will probably notice that dash lights are on.

Jan 15, 2009 | 2004 Chevrolet Impala

3 Answers

Shifting problem


press on brake? if so, stil non op, check connection, loose off, if ok FUSE, or bad switch, brake light work ok?

Oct 05, 2008 | 2001 Ford F150 Styleside SuperCrew

Not finding what you are looking for?
2007 GMC Yukon Logo

Related Topics:

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...