Question about 1998 Ford Ranger SuperCab

2 Answers

How to replace passenger side power mirror on 1998 ford ranger XLT? Hit another vehicle and knocked mirror off.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls and mirror. Then you can remove the bolts securing the mirror housing onto the door. (I assume that part is still intact).

If it's just the mirror piece and backing that fell out of the housing, then on the inside of the housing, you should see two to four clips that secure the pivot point and two rods that control the pitch of the mirror. You may be able to just 'jam' the mirror backing back in. But the rods need to be secured to the back of the mirror backing in order to prevent the mirror from just falling or moving on its own

Posted on Oct 05, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

Should be able to take panel off inside dore just at the mirror area with phillips srew driver and then ten millimeter socket for mirror unplug harness then due reverse

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am in need of under dash fuse panel diagrams backside power side 92 Ford ranger xlt.


Confused by 'backside power side', but

Just Google

92 Ford Ranger XLT fuse box
And look at the Inage tab.

Or if you are after wiring details

92 Ford Ranger XLT wiring schematic

Jan 26, 2016 | Ford Cars & Trucks

1 Answer

I need to replace the mirror of my 2007 Ford Explorer XLT as it was hit and knowcked off, hanging by the power wires. this is he Passenger side door


You can access the inside mounting bolts by removing the panel just inside of the passenger mirror...the electric plug can be unplugged without any other changes...Your mirror is of course available through your local Ford dealer...you can also try the internet to find a like new replacement mirror and head assembly...just type in 2007 Explorer passenger side mirror...Also, your least costly replacement is available at your local salvage yard...some allow you to browse, and remove yourself...(good practise before scratching yours...some yards will pull the mirror for you...you might even find the exact color...salvage yard mirror heads (electric) go for $25. to $75. Sounds like you have a good start...Hope this helps.

Feb 10, 2011 | Ford Explorer Cars & Trucks

2 Answers

Where do I find the fuel filter on a 1998 Ford Ranger XLT 2.9 liter?


If it's new enough it might be inside the fuel tank, if not then it is probably in between the fuel tank and the engine on the inside of the frame rail underneath the truck on the driver's side. It will be a small round inline filter. The special fittings on the ford are a pain so you may have to buy the tools for that from O'reilly's.

Sep 20, 2009 | 1988 Ford Ranger

1 Answer

Broke off passenger side mirror on 2004 ford ranger xlt and need


On the inside of the door pop off the plastic cover to reveal the 3 bolts, undo these and the mirror is off, becareful not to drop the wire down the door though.

Mar 24, 2009 | 2004 Ford Ranger

1 Answer

I knocked the passenger's side rear view mirror on


behind the door panel there should be 3 studs coming through the door take off the three retainer nuts and remove the mirror any issues with it let me know

Mar 07, 2009 | 1998 Saturn SL

1 Answer

1998 ford raner not getting any fire


If it's not getting fuel check the interia switch. There is a label under you hood that explains "If vehicle fails to start". The switch is on the passenger side kicker panel behind it. If it accidently getting kicked by a passenger it can turn the fuel pump off. Just check it happens all the time to Ford owners.

Feb 14, 2009 | 1998 Ford Ranger SuperCab

1 Answer

1998 Ford Ranger XLT turn signals, hazzard flasher not working


wire plugin on back of turnsignal switch not making a connecting

Jan 14, 2009 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
1998 Ford Ranger SuperCab Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...