Question about 2000 Chrysler Grand Voyager

1 Answer

I am driving to spain soon, can I adjust the main beam dipping direction from left to right hand dipping without replacing the headlight unit?.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

Unfortunately you cannot. The beam pattern itself is different. On left hand drive cars, the actual beam is designed to throw the least amount of light into oncoming cars and will look something like this.
_________
________/


you can't change the pattern as the housing unit itself is what depicts the pattern projected.

Posted on Oct 06, 2009

Testimonial: "Thanks for your reply even though it was not what I wanted to hear. Thanks again for your response."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can the headlights be adjusted in 2013 Camry


Yes they should be adjustable because people change tyre profiles front to rear and this alters the drive angle.The adjustment screws are in the headlamp housing behind lamps accessed from the hood/ bonnet side.you do need to do this properly so they align together at the legal height for full beam.there is plenty of online information on the correct height for full beam...once you have made sure all Your tyres are at the right pressure....park on level ground ...at least 3 meters from front of a wall ....and at right angles to the wall....measure the height to the centre of headlight to ground .......mark the right light horizontal line for correct height on the wall and make sure you put lights on full beam....they should shine slightly below (say an inch )to the marked the measurement of height of lamp on the vehicle....adjust until the right hand light horizon is an inch below...now mark vertical line to cross centre of reflected light....this will give you a register point to mark where the left light should fall ...this will be exact distance apart as on vehicle and again adjust left until it falls below 1inch of the measured height line of lamp on car......mark distance from right to left light and mark the same height in chalk....then adjust left light to pinpoint marked chalk cross.adjust the beams by turning the spring loaded screws behind the lights.once you are happy check dipped positions....on right hand drive the lights should dip below and left.left hand drive dip below and right.you probably didn't need so much info but ...hey it's free and it saves any misunderstanding.hope this is of help...please vote.thankyou.

Feb 07, 2015 | Cars & Trucks

1 Answer

Headlamp inclination too high up


There are two adjusting screws on the back of each headlight, as a rough check for the alignment, on flat ground, drive the vehicle right up to a wall, mark the centre of the light on the wall, reverse the car straight back about ten feet. Switch on main beam and the beam should shine straight at the mark you made on the wall. Dip the lights the beam should drop and go left by about two inches (UK). Left hand drive the beam should go to the right and down (US).

Jan 28, 2014 | 2004 BMW Z4

1 Answer

How do i adjust headlight aim on nissan note


On the back of each headlight there are two adjusting screws, one will control the up and down the other controls left and right. To get the aim approx right without the optical set. Make sure the car is sat level, tyres at correct pressure, no heavy weight in the trunk. Drive the car up to a wall or garage door and with a piece of chalk/marker pen make a cross level with the centre of the headlight. Now move the car straight back approx six feet, switch headlights on main beam, the beam should centre on the cross, switch to low beam and the beam should move to the left and down by about 5cm

fca5e1f5-0584-406d-bd08-9f21451573c7.gif

Jan 01, 2014 | Cars & Trucks

1 Answer

Mazda Astina 1991


Find level ground with a wall. Drive up to the wall and mark where the centre of your headlights are on the wall with a piece of tape. Back up 20 feet and turn your headlights on high beam. Using the adjusting knobs make each light shine directly on the spot. Low beam adjusts itself down and to the left/right (away from oncoming traffic depending on what side of the road you drive on)

Nov 17, 2013 | Ford Cars & Trucks

1 Answer

I couldnt choose Citroen in the option so please discard the audit etc. I have a CITROEN C2 VTS (NU57 XSG) and have replaced the original headlights with Citroen (morette) twin headlights, i am wanting a...


loop the main beam to the second light simple ,find the feed with a meter when the main beam is on ,simple to do but be warned here ---make sure the light has a certificate of homoglonation and a E number in the headlight glass or you could face a big fine for unauthorised modification of a motor vehicle ,also this sort of work can only be signed off by a authorised garage with a Value Added Tax certificate and a inspection to change the cars papers at the local car testing station ,or dont drive in spain as they will impound the vehicle

May 06, 2011 | Audi TT Cars & Trucks

1 Answer

No dipped beam headlights on audi a4 1,9td 2003


Check up dipped beam headlights fuse inside fuse box. For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram. If the dipped beam headlights fuse is OK, check up dipped beam headlights bulbs.

Dec 28, 2009 | 2004 Audi A4

1 Answer

Adjust c4 picasso headlamps from France to UK driving


you cannot adjust. if you park car in front off a white wall on level surface about three feet back, and look at the beam pattern you should see a straight line of light and a line going up at angle to your right. placing a bit off card board covering the angle line, the area under and up to that line will need to be blocked , you should then be left with a triangle shape about 2,1/2 by 3 on lower half of each light, your beam pattern should then only see the flat line on the wall which will then stop you blinding oncoming drivers

Nov 02, 2009 | 2005 Renault R5

1 Answer

How to adjust UK headlights in jeep grand cherokee 99-04? Can one adjust lences to meet european standards?


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

The lenses themselves cannot be adjusted to conform between left hand and right hand drive. The reflector or projector of a left hand drive vehicle is designed to throw more light towards the right side of the vehicle and vice versa for right hand drive vehicles.

Sep 15, 2009 | 2004 Jeep Grand Cherokee

3 Answers

Change over headlights from right hand drive to left hand drive


can i just alter my headlight on my z3, by the adjusters on the back of the headlights. i want to switch from right hand beam to left in france,

Aug 01, 2009 | 1998 BMW Z3 Roadster

1 Answer

Need to change headlight dipping direction


No need to replace the bulbs. They can be adjusted by most inspection stations.

Aug 07, 2008 | 2000 Jeep Wrangler

Not finding what you are looking for?
2000 Chrysler Grand Voyager Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...