Question about 2005 Chrysler Town & Country

Open Question

How do I take off the rear rotors on a 2005 Town and Country?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 137 Answers

SOURCE: 2005 town and country

when the blower resistor burns out the blower motor will not work sometimes on only one or more speeds its located in the heater box on the passenger side. its held in with 2 fasteners the part is inexpensive.

Posted on Jan 11, 2009

chryslertech
  • 115 Answers

SOURCE: low speed fan relay for the 2005 chrysler town and country

If you are talking about the cooling fan relay for the radiator there is no low speed and high speed relay. There is only one relay and it is behind the grill revitted to the bumper rail. It is doesnt look like you typical relay.

Posted on Mar 08, 2009

hunterd777
  • 14 Answers

SOURCE: Early wear on front brakes /rotors for 2008 Town and Country

I work for a brake repair shop and trust me you are not alone.Enterprise and alot of other people bought the same van and had the same trouble.I hate to say but it doesnt stop there.About every 14 to 15 thousand miles you have to replace the front pads.As of now they dont have an upgrade,for instance ceramic pads, but I am sure they will very soon

Posted on May 01, 2009

  • 191 Answers

SOURCE: 2006 town and country rear brake rotor removal

yes the e brake shoes inside the rotor tend to create a lip that will hang them up just bake them off a bit and you should be able to pull them off fairly easily also check to be sure that the stock assembly line retainer clips have been removed from the front of the rotor they are just thin looking washers that are pushed on to the lug nut studs to hold the rotor in place on the assembly line a pair of side head cutters work well to remove them and discard after removed.
Hope this helps.

Posted on Feb 13, 2010

  • 79 Answers

SOURCE: power door locks on 2005 chrysler town and

There is an ecu flash for this repair. You may get the locks to start working again with a battery disconnect.

Posted on Jun 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 CHRYSLER TOWN AND COUNTRY HAD A HORRIBLE PULSE IN THE REAR END AND A SMALL PULSE IN THE FRONT


pulsing brake pedals are allmost allways a sign that drum or rotors are not "true" straight smooth in rare cases it can also be an indication that a wheel bearing has a problem as well

Oct 24, 2014 | 2006 Chrysler Town and Country

1 Answer

2008 town and country,..rear driver side brakes heating up making loud hum noise,..just replaced caliper and still doing it,....help what do i do???


Check the sliding hardware that the caliper bolts too. A glide pin could be seized.

If the caliper can't slide it can jam a pad against the rotor causing noise, heat and warped rotors.

May 22, 2011 | 2008 Chrysler Town & Country

1 Answer

Leaking green fluid from right rear near tire of a 2005 town and country. What is it?


most likely coolant (anitfreeze) if it has rear heat pressure test system to find leak hose,clamp,etc...

May 02, 2010 | 2005 Chrysler Town & Country

2 Answers

Chrysler Town & Country Minivan Rear Drum Brakes


I replaced the brake pads on a '94 Chrysler town and country, I had the rotors turned also, I did not use any anti-vibration substance on the shoes. I hear a clicking noise from front brakes.

Apr 16, 2010 | 2005 Chrysler Town & Country

1 Answer

2006 town and country rear brake rotor removal. After several beatings, i cant get the rear rotors off my town and country. They are alittle loose, but am wondering if i have to do something with the...


yes the e brake shoes inside the rotor tend to create a lip that will hang them up just bake them off a bit and you should be able to pull them off fairly easily also check to be sure that the stock assembly line retainer clips have been removed from the front of the rotor they are just thin looking washers that are pushed on to the lug nut studs to hold the rotor in place on the assembly line a pair of side head cutters work well to remove them and discard after removed.
Hope this helps.

Feb 13, 2010 | 2006 Chrysler Town & Country

1 Answer

Torque for pyutting new rear brakes and rotors on a 2006 Town&Cou


Caliper mounting bracket bolts 125 ft, Caliper guide pins/bolts 26 ft, Brake hose to caliper 35 ft. Wheel lug nuts 100 ft. Wheel speed sensor 115in lbs*** This is for disc rear brakes Teves system. You do know that the rear disc is a Rotor/Drum. The parking brake shoes ride on the inside.

Jan 22, 2010 | 2006 Chrysler Town & Country

1 Answer

Does my 2005 Chrysler Town and Country have rear disk brakes?


look under rear of vehicle at rear tires or it can see thru opening in rim look and see if they look like the front

Oct 28, 2009 | 2005 Chrysler Town & Country

1 Answer

Early wear on front brakes /rotors for 2008 Town and Country


I work for a brake repair shop and trust me you are not alone.Enterprise and alot of other people bought the same van and had the same trouble.I hate to say but it doesnt stop there.About every 14 to 15 thousand miles you have to replace the front pads.As of now they dont have an upgrade,for instance ceramic pads, but I am sure they will very soon

May 01, 2009 | 2008 Chrysler Town & Country

1 Answer

2002 Chrysler Town and Country


Ok, i'm assuming your replacing them, there is an oval rubber stopper on the backside of the rotor, in the backing plate, located near the bottom. it will tighten or loosen the e-brake shoes inside the rotor, loosen them all the way off, then get a big hammer and give them a really good smack, be carefull not to damage the wheel studs, if your reusing them hit on the hat of the rotor, if replacing you can hit right on the rotor face.
Use some antiseize on the hub before installin your new rotors, and don't forget to readjust your
e-brake and reinstall the rubber plug

Oct 30, 2008 | 2002 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...