Question about 1993 Toyota Previa

Open Question

How do i fit a new water pump in my tiyota emina?

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

johnf1aresti
  • 1098 Answers

SOURCE: toyota emina keeps overheating

before saying that might have a cracked cylinder head or blown gasket,I recommend you to check the following for clearing some doubts. Have you checked whether the radiator is clogged?,have you checked whether the matrix is not clogged? have you bled the cooling system? Also check when you accelerating with radiator cap on if the radiator hose upper expands,if so means that the engine coolant is pressurized and the problem is the cylinder head.

Posted on Sep 04, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm attempting to do a timing belt change on my 2004 Chevy Aveo. The problem is when I took off the old timing belt I forgot to loosen the tension using the water pump. When I tried to install the new...


Yes,there is a special wrench that fits the water pump. You have to loosen bolts on pump and put wrench on pump and turn pump to get belt on. Then tighten pump till marks line up on tensioner,then tighten the pump back down. Be sure to roll the engine around twice and recheck timing marks on crank and cams.

Mar 12, 2015 | 2004 Chevrolet Aveo

1 Answer

Toyota emina keeps overheating


before saying that might have a cracked cylinder head or blown gasket,I recommend you to check the following for clearing some doubts. Have you checked whether the radiator is clogged?,have you checked whether the matrix is not clogged? have you bled the cooling system? Also check when you accelerating with radiator cap on if the radiator hose upper expands,if so means that the engine coolant is pressurized and the problem is the cylinder head.

Sep 03, 2012 | Toyota Toyota Cars & Trucks

1 Answer

How do i get a free download handbook on a toyota emina


try to www.fitness.manualsonline.com or www. retrevo.com

www.manualsfactory.com or www.pdfservicemanual.com

or acdcmanuals.com

God bless you

Jul 14, 2012 | Cars & Trucks

1 Answer

Have a Dodge Grand Caravan 3.3L what is behind water pump???Was driving and a hose popped off and coolant went everywhere its a hose from behind water pump.plwase tell me where the hose goes what needs to...


Is it the smaller water hose from the heater core? Coming from the firewall behind the engine? The metal fitting on the water pump will have to be replaced. Some are threaded and screw in. Others are press fitted, If a shop can get to the fitting where it is, they might fix it easily. Otherwise, you may need to have the pump removed, and a new fitting installed, or hey, a good time to replace the pump.
Good luck.

Jul 09, 2012 | Cars & Trucks

1 Answer

Location of diesel fuel filter on toyota lucida emina import


if its the slarnt 4 mid mount mtr it maybe up front under the bonnet if not trace the fuel line back from the pump it should lead u to the filter housing

Sep 11, 2011 | Toyota Previa Cars & Trucks

1 Answer

Installing water pump in 97 cavalier 2.2


Hi. Here's the proceudere on how to replace the water pump of your 97 Chevy Cavalier.


•1
Drain the cooling system. Place a large oil drain container under the drain fitting located on the bottom of the radiator. Turn the drain fitting counterclockwise until fluid is draining from the radiator. Use a pair of pliers to turn the drain fitting if you cannot turn it by hand. Turn the fitting clockwise to tighten it after all of the fluid has drained from the radiator.
•2
Remove the cooling fan. Disconnect the electrical connection from the fan motor. Remove the bolts holding the fan assembly to the radiator support with a ratchet wrench. Pull the fan assembly up from the engine compartment and remove it.
•3
Remove the serpentine belt. Place a wrench over the belt tensioner and rotate the tensioner to release the tension on the belt. Pull the belt off the pulleys and remove it from the vehicle.
•4
Remove the water pump pulley. Place a screwdriver behind the pulley to lock it in place while removing the pulley mounting bolts with a ratchet wrench.
•5
Disconnect the coolant hoses running to the water pump.
•6
Remove the water pump mounting bolts with a ratchet wrench or wrench and remove the water pump from the vehicle.
•7
Clean the mating surfaces of the engine block and new water pump with a towel saturated with lacquer thinner.
•8
Apply a thin layer of RTV sealer to both sides of the new water pump gasket and place the gasket on the new water pump.
•9
Place the water pump against the engine block and finger tighten the water pump mounting bolts to hold the pump in place. Tighten the bolts with a torque wrench to 18 foot-pounds.
•10
Place the pulley on the water pump and install the water pump pulley mounting bolts with a ratchet wrench.
•11
Attach any hoses previously disconnected from the water pump.
•12
Install the serpentine belt. Route the belt over the pulleys according to the routing diagram in the engine compartment. Place a wrench over the belt tensioner and rotate the tensioner to tighten the tension on the belt.
•13
Install the cooling fan. Gently lower the cooling fan in position and install the mounting bolts attaching the fan assembly to the radiator support with a ratchet wrench. Attach the electrical connection to the fan motor.
•14
Refill the cooling system to the appropriate level, start the vehicle and check for leaks around the water pump.

All the best!

Nov 10, 2010 | 1997 Chevrolet Cavalier

1 Answer

How to replace water pump on 2003 landrover freelander


DRAIN COOLING SYSTEM.REMOVE CAMSHAFT TIMING BELT.REMOVE AND DISCARD 7 BOLTS SECURING COOLANT PUMP TO CYLINDER BLOCK.RELEASE COOLANT PUMP FROM CYLINDER BLOCK AND REMOVE.REMOVE DISCARD O RING FROM COOLANT PUMP.BEFORE INSTALLING NEW WATER PUMP.CLEAN COOLANT PUMP AND MATING FACE OF CYLINDER BLOCK.LUBRICATE NEW O RING WITH RUBBER GREASE,AND FIT TO COOLANT PUMP.FIT COOLANT PUMP TO CYLINDER BLOCK .FIT NEW BOLTS TIGHTEN IN SEQUENCE TO 7 FT LBS. SEQUENCE BOLT 1 AT 11OCLOCK BOLT 2 AT 5 OCLOCK. BOLT 3 AT 1 -OCLOCK BOLT 4 AT 7 OCLOCK BOLT 5 AT 3 OCLOCK BOLT 6 AT 10- OCLOCK BOLT 7 AT 8 OCLOCK.

Sep 16, 2010 | 2003 Land Rover Freelander

1 Answer

How do I change a water pump on a 2004 kia sorento?


Kia Sorento 2003-05
Water Pump - Removal & Installation
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Drain the cooling system.
  3. Disconnect the negative battery cable.
  4. Remove the drive belt and the water pump pulley.
  5. Remove the timing belt cover, timing belt, auto tensioner and idler pulley.
  6. Remove the water outlet fitting, the thermostat case and the water pump fitting.
  7. Remove the water pump mounting bolts.
  8. Remove the water pump.

  9. dc45c19.jpg

    Fig. Water pump and timing belt assembly-exploded view

To install:

1016213.jpg

Fig. Water pump bolt locations
  1. Clean the gasket surfaces of the water pump body and the cylinder block.
  2. Install the new water pump gasket and pump assembly. Tighten the bolts to 12-16 ft. lbs. (17-22 Nm).
  3. Install the water pump fitting, the thermostat case and the water outlet fitting.
  4. Install the auto tensioner and timing belt. Adjust the timing belt tension, then install the timing belt cover.
  5. Install the drive belt, water pump pulley and then adjust the auto tensioner.
  6. Refill the coolant.
  7. Run the engine and check for leaks.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the cooling system.
  3. Disconnect the negative battery cable.
  4. Remove the drive belt and the water pump pulley.
  5. Remove the timing belt cover, timing belt, auto tensioner and idler pulley.
  6. Remove the water outlet fitting, the thermostat case and the water pump fitting.
  7. Remove the water pump mounting bolts.
  8. Remove the water pump.

To install:


e9be8c3.jpg

Fig. Water pump bolt locations

596080e.jpg

Fig. Water pump O-ring installation
  1. Clean the gasket surfaces of the water pump body and the cylinder block.
  2. Install the new water pump gasket and pump assembly. Tighten the bolts to 12-16 ft. lbs. (17-22 Nm).
  3. Install the water pump fitting, the thermostat case and the water outlet fitting.
  4. Install the auto tensioner and timing belt. Adjust the timing belt tension, then install the timing belt cover.
  5. Install the drive belt, water pump pulley and then adjust the auto tensioner.
  6. To adjust the drive belt tension, hang the belt on the pulley of the tensioner and install the tensioner.
    NOTE If the tensioner is already installed, loosen its mounting bolts to allow belt installation
  7. Install the drive belt.
  8. Adjust the belt tension to specification by turning the adjusting bolt clockwise or counterclockwise.
  9. Air conditioning belt tension should be 0.28-0.039 inch. Alternator belt tension should be 0.39-0.051 inch. Power steering belt tension should be 0.31-0.051 inch.
  10. Torque the tensioner assembly bolt to 33-36 ft. lbs. (45-50 Nm).
  11. Refill the coolant.
  12. Run the engine and check for leaks.

TY for using Fixya; remember comment and rated this.

Apr 01, 2010 | 2004 Kia Sorento

1 Answer

Where is water pump on emina


Repair manual is here:

http://www.mediafire.com/?yx9wiypm6t2

Hope this helps,

Mohammed

Nov 03, 2009 | 1993 Toyota Previa

2 Answers

Toyota emina when warms up it won't start


do you mean the starter wont turn the engine over

Apr 17, 2009 | 1995 Toyota Previa

Not finding what you are looking for?
1993 Toyota Previa Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...