Head lite how do you replace the bulb

Check you owners manual. That will tell you.

remove head lite wirer connector and check for power, if 12volt present replace bulb if not check fuse under hood make sure connector is clean and not green

If you need further help, I’m available over the phone at https://www.6ya.com/expert/mike_9693b5ad75773352

Make sure it doesn't have a fuse for each head lite. check power to plug for head lite

YOUR HEAD LIGHT BULBS IS HALOGEN BULBS NOT SUPPOSE TO TOUCH WITH HANDS.BECAUSE OF OILS ON THEM.THAT WILL CAUSE HALOGEN BULBS OVER HEAT AND BLOW.USE CLEAN PAIR CLOTH GLOVES WHEN YOU REPLACE HALOGEN BULBS.

it is normally just a replacment bulb

Sounds like you have bad ground connection or a bad bulb holder, Fast turn lights generally indicates a bad bulb or a bad connection, Check you wiring to the lights and the bulb holders

you have halogen bulbs when replacing them you have to wear clean gloves on hands .your hands has oil on them it will cause bulbs to over heat and blow. you need to wear new cloth gloves.when replacing halogen bulbs.

IF YOU OPEN YOUR HOOD AND LOOK AT THE BACK SIDE OF THE HEAD LIGHT YOU WILL SEE THE WIRES THE HOOK UP TO THE BULB GRAB THE SCOKET AND TURN IT TO THE LEFT IT SHOULD COME OUT EASY UNPLUG THE BULB AND REPLACE IT AND PUT IT BACK IN THE SOME WAY THAT IT CAME OUT

okay, I have a 94 Camry and I imagine it's the same way. Open up the hood look behind the headlight and locate the bulb actually the buld holder then twist it the holder to remove it and the bulb. Then just pull the bulb out. When replacing with a new bulb people recommend wearing gloves as your hands shouldn't touch the neon bulb as it leaves oil on the bulb. Just plug the new bulb in put bck in place and turn to secure it.

at ezbodyparts.com a head lite with bulb is 101 dollars