Question about 1999 Jeep Grand Cherokee

2 Answers

Maintence light reset

How do i reset the maintence light on a 1992 cherokee

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

One way that always works is to disconnect the battery for at least ten minutes. If the cause of the check engine light turning on in the first place is not fixed, then the light will come on again pretty quickly after starting the car.
To reset your service light here are the steps.

1. Get in your car and shut the door.
2. Put your key in the ignition
3. Turn your ignition key to position 1
4. Push in your Odometer reset button and hold it in while holding it move the ignition key to position 2 while holding down the odometer reset button.
5. After couple of seconds of holding the button down and the key in position 2 your service light will start to blink once that happens let go of the reset button and start the car.

Posted on Oct 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 17,970 Answers

Are you talking about the console on the roof telling you that you need to perform service. If that is the case, you can just push (and maybe hold) the reset button. If that doesn't work, go through the menus of the evic and you should be able to reset it from there.

Good luck.

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Perform maintence light


maybe car needs something.

Feb 16, 2013 | 1999 Jeep Grand Cherokee

1 Answer

The maintence require light is on what is the promblem


the maintence reminder lamp means you are due for oil and filter change.to reset maintence light, turn the ignition switch to the on position engine off.push the reset button on clock control panel for 3 seconds,then turn off ignition switch.then turn back on the ignition switch the maintenance light should be off is so.it has reset.

Apr 15, 2011 | 1996 Acura TL Series

2 Answers

Maintence required on red


Maintenance Required is a light that comes on after a predetermined number of miles. For example, if the maintenance schedule Honda set for the car calls for an oil change at 3000 miles, a new fan belt at 6000 miles, and another oil change at 9000 miles, then the maintenance required light will come on every 3000 miles and stay on until it is reset by the dealer. Some people, especially those that do their own regular maintenance but don't have a way to reset the light themselves, find this an annoyance. But others find it useful and take their cars in to the dealer every time the light comes on, and they rest assured that all of the regular maintenance is always done on time.

What this light does NOT do however is signal that there is anything immanently wrong with your car. It is not a "Check Engine" light (that's the one you should worry about if it ever comes on), but merely a reminder for you to do preventative maintenance. That doesn't mean you should *ignore* it, per se, as you want to make sure you have your car on some kind of maintenance schedule, even if yours is not as strict as Honda's. But there is no need to panic.

Aug 25, 2009 | 1992 Honda Accord

1 Answer

Maintence light blinks 10 times what does that


i have found that the handas use a maintenence light as there change oil light. look in your owners manual for a reset. i would reset it and see if it comes back or go have the computer pluged in and have the code if there is one retreaved

Aug 23, 2009 | 2001 Honda Accord

1 Answer

HOW TO AND WHERE TO RESET MAINTENCE REQUIRED LIGHT


Try disconnecting the negative battery terminal for four minutes then reconnect it. Check to see if the light is off. If not, take it to Autozone and see if they can clear it with a scanner.

Jul 03, 2009 | 1992 Dodge Ram 250

1 Answer

Maintence light


No...light will soon go out...Now, get out there and buy a can of SeaFoam (AutoZone) and add it to the gas tank with instructions.
Good Luck

Jun 14, 2009 | 1992 Honda Accord

1 Answer

Want to clear the "preform service" msg on the vic


I just need to hold the reset button a little bit longer.

Press the SELECT button (or whatever you use to scroll through the different items) until the maintence thing pops up. Then hold down the set button until it resets.

Good luck!!!

Jun 11, 2009 | 1994 Jeep Grand Cherokee

1 Answer

2004 Honda Odyssey D Light Does Not Work, But Maintence Required


D problem is simply a lightbulb out on the cluster board.
Simple to remove the cluster and replace the bulb.

The Service Required light can be reset by
1) Turn they key to the II position

2) Turn the key to the off position, and push and hold in the odometer reset button

3) Turn they key back to the II position, while still holding the button.

4) After about 10-15 seconds, the light should go off.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

May 13, 2009 | 2004 Honda Odyssey

1 Answer

Blinking maintence light 02 accord


turn the key off, then hold the odometer reset button in, turn key on and keep holding, the light will flash off then on once, keep holding until light stays out, start car and all should be ok

Nov 16, 2008 | 2002 Honda Accord

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...