Question about 1999 GMC Yukon

Open Question

How do u put the back seats down on a 1999 gmc yukon

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: air conditioner in 1999 yukon

Had this problem myself. After a bunch of run around, it turned out to be just a line that was not properly sealed. I was told at the time that the control panel for the air conditioning system in the Yukon was known to go bad and that replacing it would fix the problem. Hope this helps

Posted on Oct 20, 2008

  • 58 Answers

SOURCE: Cabin filter for a GMC Yukon XL 05

They no longer used a cabin filter after about 2003. The cover is there buth it is molded shut with plastic welds.

Posted on Jan 04, 2009

  • 2 Answers

SOURCE: removing the 2nd and 3rd row seats

3rd row, you simply pull the lever which makes the back fold down and then grip the handle located on the bottom and pull toward you slightly hard. They are heavy so it seems like they aren't coming out, just pull hard. second row, you flip all the way up and push with them standing up and they come unhooked. Good Luck! I didn't have any problems, except they are at least 50+lbs!

Posted on Jan 07, 2009

  • 1 Answer

SOURCE: Heated seats won't stay on in 2004 GMC Yukon Denali

There is a widespread problem with electrical shorts with the seat warmers. I bought the extended warranty through CarMax and theyy fixed it. Retail repair cost on that would have been $900+. It may be covered by GMC via a recall, but only if you raise enough hell.

Posted on May 05, 2009

smartr10U
  • 1305 Answers

SOURCE: I have a 1999 GMC Yukon Denali, 350 V8. I want to

check in the area above the rim of the oil filter...they're typically located very close to the filter.
k

Posted on Jun 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 gmc yukon third row latch #1 stuck


There is a cable that connects the handle to the latch, the cables like to break/stretch, sometimes if you look close at the rear of the seat where it attaches to the floor you can see the latch and manually release it with a long screw driver or similar tool.
Cables are avaiable from GM dealer if thats the problem.

Apr 04, 2014 | 2005 GMC Yukon Denali

2 Answers

1999 GMC yukon looking for front driver seat


When mine broke I want to scrap yard and removed bymyself for $50.

Apr 03, 2013 | GMC Yukon Cars & Trucks

1 Answer

MY 1999 GMC YUKON THE FUSE FOR THE TAILIGHTS AND DASHE BLOWS EVERTIME I PUT NEW ONE IN AND LIGHTS GO OUT


The fuse is doing it's job. Saving the wiring harness from melting down into it's self and shorting out everthing next to it. No simple soultion. Some one need to get in there and find where the wire is shorted out. DON'T bypass or replace the fuse with some thing bigger. This will cause bigger problems & $$$$$$ down the road

Jan 16, 2013 | 1999 GMC Yukon

1 Answer

How do i let down the rear seats in 2003 gmc yukon xL


FYI- I'm taking a shot at this one based on my 2003 Montana so take it for what it's worth.
My van seats have a very small level on the drivers side of each seat. Pushing the lever down allows the seats to fold down while pulling the lever up allows them to recline. There is also a small ******** the back side of each seat which when pulled allows them to be folded down.
Hopefully your 2003 Yukon seats are similar to my 2003 Montana seats and this will work for you

Feb 02, 2011 | 2003 GMC Yukon XL

1 Answer

The location of the 02 sensoron 1999 gmc yukon sle


1999 GMC Truck Yukon 4WD 5.7L SFI 8cyl
The Oxygen Sensor is located under vehicle, passenger side, below seating area, rear of catalytic converter, mounted in driver side exhaust pipe.

Application: With dual catalytic converter
Number two

Hope helped (remember rated this help) Good luck.

Dec 09, 2009 | 1999 GMC Yukon

1 Answer

Does the back seat of the yukon come out? I can


by the picture it looks like a 2000 to 2004 yukon.
im assuming you are talking about the 3rd row seat?
if so yes it comes out, the instructions are numbered on the seat, 1, 2 3.
if you are talking about the rear seat, inline with the rear doors, they do not come out, only fold down

Jul 21, 2009 | 2003 GMC Yukon XL

1 Answer

Air conditioner in 1999 yukon


Had this problem myself. After a bunch of run around, it turned out to be just a line that was not properly sealed. I was told at the time that the control panel for the air conditioning system in the Yukon was known to go bad and that replacing it would fix the problem. Hope this helps

Sep 07, 2008 | 1999 GMC Yukon

Not finding what you are looking for?
1999 GMC Yukon Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...