Question about 2002 Ford Ranger Regular Cab

1 Answer

2002 ford ranger has engine light on. when i come to a stop the engine idle is high sometimes low to were the truck turns off. Runs good on the road.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,187 Answers

Inspect / replace the idle sensor.
This is not an advertisement:
Take your vehicle to AutoZone for a free "check engine light' analysis and ask for an explanation print-out. Have them reset the PCM (check engine light).
Let us know the code and summary of the print-out.

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 1993 ford explore six cyl starts good but put in gear a it stall right away ?


In park or neutral not much load on the engine, when you put it in gear, there is a load. How may miles on the engine? How long since a tune-up? Any applicable trouble codes? Check and clean the idle air system and throttle body, see if it helps? Check cylinder compression. If the compression is way low, it may be tough trying to get it to run correctly.
In the old days, carbed engine, no computer, sometimes we'd set the idle in drive, at least it was driveable, it wouldn't die every time you stopped at a stop sign or red light. Yeah, when you put in park or neutral, the rpms would go high. Sometimes, your just trying to keep it on the road, if possible.

Aug 27, 2017 | Ford Cars & Trucks

1 Answer

1994 ford ranger 4x4 4,0 it idles good but when going down road the check engine light comes on within 20 seconds acts like it is flooding out loses power let off for a second and then runs good for...


It should have a code stored. Some places still carry the scanners for OBD 1 Fords for around fifty bucks. Without knowing anything else about the truck or what codes you have, it sounds like you have a bad throttle position sensor.

Jan 05, 2011 | 1994 Ford Ranger Supercab

1 Answer

I have a 1989 ford e150 5.0L. have to hold pedal to floor for it to start and it runs ruff and coughs when its running sometimes stalls when driving but will run great at times. oh and idles high and low...


I had an 88 that did something like that, it would idle up and down it seemed to be worse when the engine was cold. It turned out to be the MAP sensor, I never did get a check engine light. A friend of mine had the same truck and we swaped sensors back and forth until we found the problem.

Mar 26, 2010 | Ford E-150 Cars & Trucks

1 Answer

My 2002 explorer with v8 engine idles really high when i start it and it shifts really hard and my check engine light stays on sometimes it even idles really low when stopped also the lights dim and fan...


You may want to check for a broken vacume line it will cause a high acceleration. Also have the code extracted and see what it says let me know or post it it would be helpful in giving you a more precise diagnosis.

Mar 01, 2010 | 2002 Ford Explorer

1 Answer

1998 ford ranger idles rough, high then low


does car have engine codes? sounds like your idle air controle valve is sticking. or possible egr problem

Feb 18, 2010 | 1998 Ford Ranger SuperCab

1 Answer

I got a 1990 ford ranger 2.9 v6 its running very crappy


Fluctuating an high RPMs sounds like a leaking or missing vaccume hose to me, I had simmilar problem found open hole with hose off, replaced it now the RPMs are under 1000 again.
As for the stalling I also am having a simmilar problem, and am finding air in the fuel rail, I suspect the fuel pump is going.
I cant go more than a mile without problems.

Dec 03, 2009 | 1990 Ford Ranger SuperCab

1 Answer

2002 Ford Ranger surges when air temperature is cold


It could be the air-fuel ratio is too lean and isn't correcting for a low air temperature. I have noticed a couple of Fords doing the same thing, but only at light throttle and the problem disappears as soon as the engine is put under load.

The Ford technical hotline might be able to provide an answer if you can find a mechanic willing to call them on your behalf - they won't talk to unregistered users.

Apr 26, 2017 | 2002 Ford Escape

Not finding what you are looking for?
2002 Ford Ranger Regular Cab Logo

Related Topics:

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...