Question about 2003 Ford Mustang

2 Answers

The cars has been acting find, no simptoms, got into the car this morning and the brake pedel went to the floor ! i now have no brakes but the fluid levals are all fine! no leaks that are apparent. pleas help with any ideas joe

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,982 Answers

Master cylinder may be bypassing internally. usually if this happens you can get a partial pedal if you pump it.
If so, replace the master.

Posted on Oct 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 424 Answers

Could possibly be your master cylinder bypassing internally. If there are no leaks and you have no pedal. I would say master cylinder.

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake trouble shooting


First off make sure you have brake fluid in your reservoir. Secondly if brake fluid is at the full line. I would try bleeding the brakes. This takes two people. On each cylinder there is a bleeder valve. Start with the drivers front with the engine off have somebody pump the brakes 3 or 4 times then hold it to the floor. open the bleeder valve and the break will go to the floor shut the brake bleeder valve. And repeat 2 more times. " MAKE SURE YOU CAN CHECK YOUR BRAKE FLUID AT EACHthe STEP AND REFILL RESERVOIR AS NEEDED".Then move to the next 3 until complete. If this does not fix your problem most likely you have a bad master cylinder. Good luck.

Aug 21, 2013 | Oldsmobile Cars & Trucks

1 Answer

1986 rolls royce silver spur brakes do not work


When u push on the brake pedel does it go to the floor. If so u have a leak somewhere. If not possible master cylinder. It will use Dot 3 brake fluid.

Jun 14, 2012 | 1991 Rolls Royce Rolls Royce Silver Spur

1 Answer

I have a 2004 Dodege Ram, Diesel 4x4, I Replaced front and back brakes this summer. My brake lite went on about a week ago and now my pedel goes all the way to the floor. Any ideas? Im hoping I just need...


Try bleeding the brakes. But, it sounds like you have a fluid leak. Check all four wheels for brake fluid leaking.
Check frame for wet spots.
chcke that the Master Cylinder is full.

REMEMBER TO RATE THIS ANSWER

THANK YOU

Dec 26, 2010 | 2004 Dodge Ram 2500

1 Answer

2000 silerado sometimes brake pedel goes to floor on low speed stops


Brake pedal shouldn't go to floor for any reason. Check brake fluid level. If high, then there is a problem with the master cylinder.

If the fluid is low, add until the proper level and check for leaks in the brake lines.

Is there an ABS light on?

Nov 06, 2010 | 2000 Chevrolet Silverado

1 Answer

Replaced rear breaks, 2007 spectra, breal pedel is solf, goes to the floor. how do I firm up break pedel, never broke any lines.


You have to check that rear brake cylinders doe's not leak fluid. Check your master fluid reservoir when you pump the brakes.
You have to bleed air from the system, and check the vacuum hose at the master brake cylinder.

Feb 21, 2010 | Kia Spectra Cars & Trucks

1 Answer

[2004 f150 the brakes only work part of the time


ok, this simptom is maked by: air in fluid lines , or master cylinder damaged, also check brake pads.

May 03, 2009 | 2004 Ford F150

1 Answer

Toyoyta mr2 brakes are gone


What part is bad that is leaking? Sounds like you are getting air into the brake line and this will cause a problem with te pedal going to the floor

Feb 10, 2009 | 2002 Toyota MR2 Spyder

1 Answer

Brake pedel goes to the floor


pump the pedal until it goes hard this is common when you push it back all the way just needs a few pumps to get it to extend back to the pads making contact with the rotor, is there any fluid leaking anywhere? is there brake fluid in reservoir?

Nov 27, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
2003 Ford Mustang Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...