Question about 2001 GMC Yukon XL

1 Answer

Won't shift out of 4 wheel drive low

Put in 4 wheel low and it wouldn't go back to 2 wd.

Replaced the transmission swith however it didn't help. Switch now doesn't light up, checked fuse and fuse is OK

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • GMC Master
  • 12,173 Answers

Modulator stuck or damaged located at transfer case take a rubber mallet and hit around where modulator and case connect than try to shift again if nothing than un bolt and lube and move actuator rod, with out try to move electronically w/switch back to 2 wheel drive -if moves should work can replace but look for replacement as back up if happens again just change over

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When shifted into 4wd, why does it feel as though there's a brake engaged?


Newer ones have clutches in them. Usually the clutch unit is replaced. This is costly. Shop around at junk yards. At a transmission shop, it could be up to two thousand dollars for the T case. Keep it out of 4 wheel drive till you replace it.

Nov 07, 2015 | Cars & Trucks

1 Answer

I have a 2003 2-wheel drive 2500HD silverado, i accidentally drained the tranny fluid out except for what was left in the pan instead of the oil, realized my mistake shortly after it would rev up before...


Start it up to warm it up, check tranny fluid in park or neutral, if low, put more in. Hope it is junk though. If not low, you never know. I'd runit till it breaks and keep putting in fluid if needed.

Jul 14, 2017 | Cars & Trucks

1 Answer

4x4 K1500 Chevy Truck, 4 wheel drive repair instructions


There are a number of different hub systems so this may not work but it has worked for me on both auto and manual locking hubs. On a flat surface without traffic. Put the trans into neutral, shift the transfer case into 4x4, shift the trans into reverse and back the truck up 15-20 feet. Completely stop and shift trans into drive. See if this has locked the hubs in. If not, you can also try following the same instructions except shifting into 4wd low. Sometimes the hubs need a "bump" to get them to slip into place. Keep In mind that if the 4 wd low select works, you need to shift it back into 4 wd high before continuing! When taking the truck out of 4wd to 2wd, I recommend the same, shift to neutral, select 2wd, back truck up, shift back to drive and check. Its entirely possible that your hubs need maintenance (they're often overlooked) but hopefully this will get you going. Please let me know if thus worked or if I can offer other suggestions. Good luck!

Jan 18, 2012 | Chevrolet 1500 Cars & Trucks

3 Answers

Wont disengage out of 4 wheel drive 1998 ford ranger first time its stuck in 4 low we have backed up turned switch numerous times shut it off and restarted


Be sure to put the truck in neutral, while engine is running, while you disengage from 4 wheel drive (low) to 4 wheel drive (high) and then finally to 2 wheel drive. It is critical to shift transmission into neutral when switching out of 4WD Low, as indicated in your owner's manual. Hopefully, this will help to FixYa problem!

Oct 14, 2010 | 1998 Ford Ranger SuperCab

1 Answer

Won't come out of 4 low and won't change from 1st to 2nd gear


try checking your auto trani fluid... and with the 4 wheel drive try puting ti in nuteral and if the doesnt work try puting it in reverse and back up after taking it out of 4 wheel drive.

May 24, 2009 | 1996 Ford Bronco

1 Answer

How to shift into 4wd


Ford has 2 types of 4x4 system engagement. One is a knob on the dash that you just turn to 4wheel drive high or low. The other system is the 4x4 transfer case shift on the transmission tunnel (hump) between the driver and passenger seats. To shift into 4 wheel drive high while driving, just let off the gas and shift transfer case into 4H position, and continue driving. To shift into 4 wheel drive Low, stop the vehicle completely, put transmission in neutral, shift transfer case into 4Low position, put trans. in gear, and start driving. I am assuming before doing the above, you have locked in ( turned the front hubs to 4 wheel drive position.) Any further questions, let me know.

May 16, 2009 | 2003 Ford F150 Regular Cab

1 Answer

Noise in front diff


Three probable issues;
1-The transfer case is low or out of fluid.
2-The drive shaft may be out of alignment due to worn front or back U joints (thus the clunk on shift)
3-the shift lever is out of alignment with the shift mechanism on the transmission housing.

Mar 26, 2009 | 1989 Chevrolet K1500

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
2001 GMC Yukon XL Logo

831 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...