Question about 2004 GMC Envoy

1 Answer

The passenger side brake light does not work. The bulb is good.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,341 Answers

Get a voltmeter and check the voltage reading at the connection point and work from there backwards if there is no power.Also you may need to check ground and continuity of wiring from one point to the other.Hope this helps.

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers side tail light not working


Put the passenger bulb in the drivers side and see what happens, if it works buy a new bulb.

Oct 19, 2014 | Cars & Trucks

3 Answers

2011 ford feista se brake light out on drivers side. Running light and blinker work. Have replaced bulb and socket with same results what do I do now?


Did you try the passenger side brake bulb in the driver side socket (maybe the new lamp is bad)??

If it works, then the problem is either a bad ground connection / wire at / between chassis and the shell of brake lamp socket, or bad 12 volt wire at / between the common passenger 12 volt brake light wire in the harness to the center contact on the brake lamp socket.

My suggestion is if the brake lamp wire is ONLY for brakes - not the directional too, simply add a new wire spliced into the passenger side brake light wire and extend it to the brake light wire closest to the new socket that you recently installed on the driver side. Disconnect the vehicle brake wire from the new socket and wire nut it off or tape it up (so it can't short out if it somehow becomes energized again) and splice this new wire to the new socket.

Test & you're done!

May 21, 2014 | 2011 Ford Fiesta

2 Answers

Honda Civic Brake light Problem


sounds like a bad earth/ground to me, common fault with brake lights

Feb 23, 2014 | 1999 Chevrolet Tahoe

2 Answers

ELECTRICAL PROBLEM


take it to a body shop

Nov 27, 2013 | 2000 Dodge Stratus

1 Answer

On my 4 x 4, the passenger break lights don't work but the bulbs are good. What do I look for?


When you lock and unlock the doors, this is usually the side light which illuminates, not the brake light.
Remove the brake light bulb, (which also contains the side light filament) and check the filament. It's likely blown, so simply replace it.

Nov 03, 2012 | 2007 Chrysler Aspen 4x2

1 Answer

Driver side brake light does not work when on the brake pedal. passenger side works. replaced the bulbs. still the same. what is wrong?


Bad Socket,most likely you don't have a good ground from the light socket or the new bulb is no good.

Aug 02, 2010 | 2001 Dodge Durango

1 Answer

When i press brake pedal driver side brake light quits working but other wise it works fine?


That has a double filament bulb in it. One is for the tail light and the other for the brake and maybe the turn signal. If your turn signal flashes the tail light and not an individual turn signal bulb it will behave the same way. The way it works is that the tail light filament goes off and the brighter brake light filament comes on. The brake light half of the bulb is out. If you change it, change the passenger side too, it will do the same shortly if you leave it in. They tend to go bad in pairs. Good luck.

Apr 20, 2010 | 2000 Saturn SL

1 Answer

Emergency Flashers totally out, Rear lights malfunctioning


Check the ground on the passenger side rear lights, it's likely bad. As for the hazards, sounds like a bad flasher or fuse.

Sep 03, 2009 | Ford Super Duty Cars & Trucks

1 Answer

Brake lights


If all of the wiring, fuses, bulbs, and switches are good (which is what it seems since everything else works fine including the turn signals on the passenger taillight), sounds like it may just be a bad socket. I have a somewhat similar problem on a 1986 F150.

Jul 27, 2008 | 1984 Ford F 150

Not finding what you are looking for?
2004 GMC Envoy Logo

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...