Question about 1992 Toyota 4Runner

2 Answers

Gas peddle sticks - 1992 Toyota 4Runner

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 832 Answers

Most gas pedal is connected to the carburetor by a 1/8 or 1/16 inch cable to control the gas entering the combustion chamber of the engine. When this get stucked due to wear, it is high time to get a replacement Accelerator Cable for Toyota 1992 4 Runner. Get this done, and send your e-mail comments.

Posted on Oct 05, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

I say replace the trottle cable, don't just loobe it My friend had a suburban that did that and we loobed it and wot worked for a wile till one night it got stuck when we were driving and we hit a tree. It's worth spending the money on.

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace a brake lamp switch on a 2007 Hyundai Entourage


I hope you have a good back.You can get on your knees and look under the dash and steering column.
Find the gas and brake peddle. Follow up from the bottom of the brake peddle, Look at the back side. The brake peddle bracket depresses a switch( brake lamp switch). it is very simple to remove. As usual with all work...disconnect the negative battery cable. unplug the brake switch. remove the retaining nut (if it has one) and unscrew the switch from the bracket behind the brake peddle bracket. Take note how far it is sticking out for the reinstallation. Replacing it is just as easy

Jul 13, 2014 | 2007 Hyundai Entourage GLS

1 Answer

Gas peddle cord is sticking for my 91 celcia


spray wd40 on the throtle cable if u have cruse controll spray that cable to

Sep 25, 2013 | 1991 Toyota Celica

1 Answer

Suzuki Escudo Jeep High Rpm


I am not familiar with Suzuki's but the first thing to check is that the throttle or throttle cable or throttle peddle are not sticking. With the engine off, ask a friend to press and release the throttle peddle while you look at the throttle to see if it moves. If it doesn't then you need to check each item to see which one is sticking.

Jul 12, 2012 | 1991 Suzuki Sidekick

1 Answer

Gas peddle sticking


check to see if cable is proper legth spray cable with lubrication afterpulling cable out so petal is to floor

Dec 16, 2011 | 2002 Pontiac Montana

1 Answer

When i push the gas peddle down while driving it spudders and backfires


IGNITION TIMING OFF.LEAN FUEL MIXTURE CAUSED BY CLOGGED FUEL FILTER.VALVES STICKING CAUSE ENGINE BACK FIRE.

Sep 14, 2011 | 1994 Chevrolet S-10

1 Answer

GAS PEDDLE STICKING ON 2002 INTRIGUE PLUS NO OIL LEAKING BUT DOWN ABOUT 1/4 QUART EVERY COUPLE WEEKS? PLEASE ADVISE. THANKYOU


the oil issue could be thatyour engine is burning it, a sign of a weakening engine! Don't know what to tell you about the gas pedal!

Mar 02, 2010 | 2002 Oldsmobile Intrigue

1 Answer

Camshaft sensor location


it may be on the bell housing right about where the gas peddle is it plugs in from the top and is a real treat to get to. i usede a broom stick with some mig welding wire as a noose to pull it out ..

Jan 31, 2010 | 2000 Oldsmobile Bravada

1 Answer

My car wont start unless i give it gas. it wont keep idling without my foot kept constant on the peddle.


have you replace the fue filter? a sticking iac sensor can also cause problems starting also check the air flow sensor

Nov 23, 2009 | 1997 Pontiac Grand Prix

1 Answer

The gas peddle on my truck will get stuck after I turn it on and I havae to push harder on the peddle to get it going. Have owners experienced this problem, how can I fix it?


Clean the Throttle body intake. This is a known problem with our trucks. If you don't know what this is just google it. The butterfly valves will hang up on the black deposits and make the pedal stick at the top end. Super easy fix give it a shot. All you should need is some carb cleaner and scotchbrite pad. Cheers!

Apr 22, 2009 | 2000 Chevrolet Silverado

3 Answers

Gas Peddle sticking


Remove the cable from the engine side and feel if it is free , if not lube .Check your engine earth cable is tightened and fitted properly , the engine could be earthing on this cable causing it to sieze.

Nov 16, 2008 | 1998 Isuzu Trooper

Not finding what you are looking for?
1992 Toyota 4Runner Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...