Question about 1999 Nissan Altima

1 Answer

How to fix a 99 clutch how to fix a water pump

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

What are you talking about the fan clutch? if so it unbolts from the fan and water pump and the clutch can be replaced. The pickups had problems with the ideler pully so replace it at the same time. if it's slipping not going into gear then yo need a clutch pack throw out bearing and ideler bearing you will need to have the flywheel surfaced as well. costs about $280.oo for everything and a days worth of work, it's light enought for one man to do the job.

Posted on Oct 05, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I replace a water pump in a 1998 nissan altima?

Here is the procedure:-

use this link for picture

  • When removing water pump assembly, be careful not to get coolant on drive belt.
  • Water pump cannot be disassembled and should be replaced as a unit.
  • After installing water pump, connect hose and clamp securely, then check for leaks using radiator cappressure tester.
Use this link for pictures:-

  1. Drain coolant from drain plug on water pipe andradiator.
  2. Remove right lower splash cover.
  3. Remove generator and air conditioner compressor.
  4. Remove two bolts from coolant tube (rear of water pump).
  5. Remove water pump assembly.

  • Check body assembly for rust or corrosion.
  • Check for rough operation due to excessive end play.
  1. Use a scraper to remove old liquid gasket from water pump and water pump cover.
  • Also remove traces of liquid gasket from mating surface of cylinder block.

Mar 17, 2015 | 1998 Nissan Altima

1 Answer

What is the best way to change a water pump on nissan sentra

First remove the thermostat housing at the side of the water pump and then remove the water pump bolts. Now you can take off the water pump. You get high quality water pumps for all models at

Jun 29, 2011 | 1996 Nissan Sentra

1 Answer

Water pump licking

The attached video explains how to change a water pump, step-by-step.

Please remember to rate this solution.

The FixYa Team !

Feb 04, 2011 | 1991 Nissan Stanza

2 Answers

2002 BMW 330i still running hot after replacing thermostat & housing, fan, fan clutch, auxiliary fan and flushing the radiator. Any explanation as to why?

These water pumps are know to fail internally. The blade may freespinning. You will need to remove the water pump and inspect.
Or you may have a head gasket issue. Its simple to test if you want a shop to inspect it for you

Dec 04, 2009 | 2003 BMW 330

1 Answer

Pulling a fan clutch assembly from a GMC 4.3 water pump?

First remove the fan from the clutch. There should be four to six bolts holding the fan to the clutch. The clutch is held on to the pump with four bolts. remove the four bolts to remove the clutch. I've included a pic of the pump to indicate the four mounting holes. Not sure if the link will work.

Aug 10, 2009 | 1996 GMC Sonoma

1 Answer

99 frontier, how do you remove fuel pump once tank is on ground?

pull the sending unit with pump assembly from the tank. Remove the fuel pump with bracket while lifting the pawl of the pump bracket upward. remove hose clamp and electrical connections. Replace as removed should have tank strainer already installed. Need a picture go to:

Hope this fixya

Jun 24, 2009 | 1997 Nissan Pickup

1 Answer

Need to get this fixed remove water pump pully on 99' dodge 5.9 liter

You will need a special holding wrench made by "LISLE TOOLS" or "OTC", most tools stores stock it
its fairly cheap, looks like a long thin como wrench, and might com in two pcs, one for fan clutch.
good luck

May 20, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
1999 Nissan Altima Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides