Question about 1998 Pontiac Grand Prix

1 Answer

It cranks but dont start......i think it jumped time, im wanting to replace timing belt plugs, wires, and coil packs.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

First make sure you have compression on all cylinders if you have compresson on all then you have antoher problem, if it trys to start and back fires you could have a bad distributor cap or a bad set of contacts or the rotor has come loose and is spinning around.

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tahoe not getting fire to plugs, when I try to crank it there is an odor of gas and no start! Crank sensor,evap purge valve solenoid, fuel pump and knock sensors have all been replaced.


Things to check:
  1. Timing chain or timing belt (depending on which engine you have);
  2. Coil pack or ignition coil (depending on which engine and year);
  3. Rotor and distributor cap (if your Tahoe is an earlier model);
  4. ECU (especially if you jump-started the car before the issue began);

Jul 20, 2014 | Cars & Trucks

1 Answer

JUST DID A HEADGASKET JOB ON MY 95 SUBARU LEGACY, GET EVERYTHING BACK TOGETHER NO SPARK?


sounds like a timing problem, did you replace the cambelt? or check the idlers for wear? a worn idler could make it jump.

Jun 19, 2014 | 1995 Subaru Legacy

2 Answers

TURNING OVER BUT WONT START REPLACED COIL PACK, FUELPUMP, FUEL FILTER, PLUGS AND WIRES. CANT FIGURE OUT THE PROBLEM


Have you checked the injector wiring? Each has only 2 wires you can check. If no power, test the injector power control module.

Sep 09, 2010 | 1995 Eagle Talon

2 Answers

My truck is missing on the forth and fifth


things that can cause it to miss.
fouled plug (checked)
bad wires(checked)
coil pack(checked)
ignition signal to coil pack( switch old coil pack to a working cylinder to make sure its good and you may find a possible short in the wiring to the coil pack) alternately check the voltage to the wires going to the coils make sure like colors have like voltages. im not too big into ford trucks but thats a good start for most vehicles
possibly injector stuck open and flooding cylinders
timing could be off

Jul 20, 2010 | 1998 Ford Ranger SuperCab

1 Answer

Truck not firing properly front coil pack not firing at all.


if this truck has an o2 sensor i would replace that and also make sure the cat-converter is not plugged,this would give you your powerloss and egr code,next is your coil,this may be caused by the computer or your crank sensor,look at the tone ring that the crank sensor uses and make sure its not missing teeth or broken,also check all your fuses.

Jun 12, 2010 | 1994 Ford Ranger Supercab

2 Answers

Changed timing belt on my 99 ford escort zx2 car no


if you have a no spark scenario i would check your crank sensor located at the top left side of the harmonic balance pulley.the crankshaft (about 11'oclock) a 2 wire plug with a sensor on it check to see if it is damaged or unsecured. this sensor can cause no spark if not working correctly. This sensor is based of frequency not voltage testing is difficult, just make sure that there isnt too muck air gap. and that it is secured.Lastly may want to check timing possible that the belt has jumped some teeth and she has fallen out of timing. maybe a bad tensioner The coil will adapt i think up to 10 degree, ****** or advance. Good luck

Apr 18, 2010 | 1999 Ford Escort

2 Answers

2001 FORD TAURUS 24 VALVE DOHC MOTOR WILL NOT START


i have a 2001 taurus 24valve dohc 3.0 engne i have a bad coil pack what steps do i need to do to change the coil pack

Sep 07, 2009 | 2001 Ford Taurus

1 Answer

1994 honda accord won't start and has no spark


Check your coil and ignition module and ignition module fuse. this is a primary ignition problem for sure. check the primary resistance side of the coil it should be between 1 and 3 ohms. Also are you sure you put your cam gear at the exact mark it shoul be at and not 180 degrees off, otherwise car won't start.

May 30, 2009 | 1994 Honda Accord

2 Answers

Try to start my 2001 ford focus want start everything else works the lights the radio etc


i have replaced coil pack. wires plugs on a 2000 2.0 sohc ford focus..and it still has no fire.... motor just turns over.. 99'000 miles i had the timing belt and all replaced about 10'000 miles ago at ford dealer ship.... what might be my problem now crank sensor??? all fuses i checked they are all good.... it just spins no fire to plugs so it seems...

Dec 14, 2008 | 2001 Ford Focus

Not finding what you are looking for?
1998 Pontiac Grand Prix Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...