Question about 1989 Chevrolet C1500

2 Answers

How does the speedometer work in a 1989 c1500? is there a cable ? the guy I got the trk from said the trany he put in didn't have the same hook up as the old one because it was out of a newer trk

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

The 89 truck uses a cable it is not a magnetic pick up so there is an inner and ottter cable and you can buy from any parts store. inner cable runs 10 dollars a fitted inner and outter cable is about 425.00 and is the way I would go.

Posted on Oct 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 108 Answers

Mine was on the tranny where the driveshaft spline gear entered the transmission.

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Speedometer cable replaced still have speedometer flutter


1989 Mustang speedometer is cable drive so VSS will not affect.
If over 140k miles the speedometer is likely worn out.
My company SpeedometerRepair.com can repair or another speedometer shop.

Feb 19, 2015 | 1989 Ford Mustang

1 Answer

How do i replace a starter on a 2001 gmc jimmy


ok jack the trk on the driver side. block the truck so it doesn't fall on you. climb under the trk behind the passenger tire font. look up and you will see the starter u will need a 5/8 socket to remove the starter. you will also need i believe it 5/16 wrench and a 11/16 wrench to re move the wires .also i didn't mention un hook the positive cable from the battery. when you pull the starter out don't loose the shims that come out. the two 5/8 bolts are what hold them in you need them when installing the new starter . once you have the new starter .do every thing in reverse .i hope this helps bob

Apr 26, 2011 | GMC Jimmy Cars & Trucks

1 Answer

I have a 1988 lebaron 2 door coup 2.5 ltr and the speedometer and odometer don't work but the tachometer and gas gauge work. i think it might be the speedo cable but i would like someone to point me in the...


The first thing to do would be to remove the cable at the trany and spin the inner part of the cable and see if speedometer moves a little, if it moves then you will know the cable is good and so is the speedometer and the problem is the gear in the trany, remove the small housing that the cable screws into amnd there you will see a gear, remove the clip and slide the gear off and replace it with a new one, you should be able to seee the gear teeth worn out,but is the speedo doesnt move when you turn the cable then the cabl may be bad, slide cable out by pulling it, and look for thee broken end. hope this helps.

Feb 13, 2011 | Chrysler LeBaron Cars & Trucks

1 Answer

My temperature gauge and my fuel gauge arent working and the fuse is is good .... also how hard is it to replace the speedometer cable ?


On replacing the speedometer cable, on a scale of 1 to 10, probably 3 or 4.
Hooking to the transmission, " baby play ", connecting the other end to the speedometer, well that represents the 4.

Jan 25, 2011 | 1989 Ford Ranger

1 Answer

Speedometer not working cable good from trany to


THE SPEEDOMETER CABLE GOOD AND SPEEDOMETER NOT WORKING.2 POSSIBLE CAUSES WHILE ITS NOT WORKING SPEEDOMETER GAUGE BROKEN OR SPEEDOMETER DRIVE GEAR IN EXTENSION HOUSING BROKEN.

Jun 14, 2010 | 1983 Chevrolet K2500

2 Answers

Have 93 trooper with non working speedo have checked wiring and changed speed sensor but still not working


have you check all the fuses, and is there a signal coming from the sensor with the wheels spinning,also did you replace the rear end abs sensor, if not also replace that one heres a diagram to show you how to test the speedometer in the dash, you will have to remove the cluster,also the sensor you did change was in the trany,thats the correct one is on trany but also do the rear diff sensor for abs,028952a.gif

Mar 23, 2010 | 1992 Isuzu Trooper

1 Answer

Im looking for the cover that holds speedometer gear its a 400 tu


The best place to find this is a local long time transmission shop.

Aug 12, 2009 | 1984 Oldsmobile Cutlass

1 Answer

1987 Volkswagen Golf - speedometer problem


Well I would verify the trany speed gear is "ate up" first, theres only one 10mm bolt that holds it in place, sure the area around the speedo cable is very CLEAN before removing it any dirt in there would make things bad to say the least. If you pull the cable out the gear is attached to the cable if it looks good then put it back together and remove your cluster (speedo and other gauges inside) I suggest you pick up a repair manual at a big auto store on MK1-MK2 vdubs (82-92) to explain how to remove speedo cable from back of cluster its kinda of tricky getting your fingers back there and pressing it together to get it to release. Once out drive the car and see if that cable is turning from the inside if it is then its your speedo gauge that is faulty. Grab a cluster from a scrap yard, if that cable is NOT turning then the gearing inside the trany is messed up which would mean taking the trany apart to repair it. If that was the case you would be cheaper to replace the whole trany with a used one. Good luck

Vdubs 4-ever

Feb 24, 2009 | 1991 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...