Question about 2000 Ford Taurus

2 Answers

I can't seem to get off the front rotors of my 2000 Ford Taurus V6 3.0 DOHC 24v. I banged and banged away from every angle but no movement what-so-ever. Are the rotors held on by wheel nut?; I can't tell. Thanks for any help.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 123 Answers

No there is no nut. You should just need to remove caliper and then the caliper mount and the rotors will come off.. They might be rusted on but they will break free.

Posted on Jan 18, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

No there is a screw that has to be broken loose with a spring hammer, you also have to remove the caliper bolts 2 of them. and remove the holders so the rotor will come off.

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost keys and replaced ignition lock cylinder on 2000 ford Taurus SES 3.0L. 24V DOHC Duratec . Can encoded keys be made from mechanical ones that came with ignition?


No, you'll have to call a locksmith in that makes these keys that are coded to the switch sensor. It'l just be a key for THAT switch only.

Jul 06, 2017 | Ford Cars & Trucks

1 Answer

Does a 1996 mercury sable and 2001 ford taurus have the same engine


Its possible. In this time span Ford used two different motors, the overhead valve (OHV) Vulcan V6, and the Duratec 24V V6, which will bear the 24v DOHC badge on the front fender.

Aug 31, 2011 | 1995 Mercury Mystique

1 Answer

Shaun just answered my question on a thermostat change on a 3.0 in my 1998 Taurus. Is the answer the same if it is the 24V DOHC?


Hi, this is Shaun again. The answer is the same for a 24v DOHC. Coolant systems are pretty simple and haven't evolved much with different vehicles and motors. It's pretty much the same process with all vehicles.

May 06, 2011 | Ford Taurus Cars & Trucks

1 Answer

When I turn my wheels to the left or right they


fords famous power steering pump design its common if you replace the pump with a rebuilt one there is a paper with the new pump that warns you of this noise for about 500 miles after installing hope this helps

Jul 31, 2010 | 2000 Ford Taurus

1 Answer

How to replace throttle position sensor on a ford 2000 taurys 24v dohc ?


VERY SIMPLE PROCEEDURE GET NEW ONE AND HOLD IT UP NEXT TO OLD ONE YOU CAN DO IT

Jun 27, 2010 | 2000 Ford Taurus

1 Answer

How do i repair left front hub & bearing assembly on a 2000 ford taurus v6 24v dohc


BEST TO GET A HAYNES REPAIR MANUAL IT HAS PHOTOS AND INSTRUCTIONS ON HOW TO REMOVE HUB BEARING ASSEMBLY.YOU WILL NEED A 1/2 SIZE TORQUE WRENCH FOR HUB RETAINING NUT.ITS TORQUE IS 170 - 202 FT LBS.MAKE SURE YOUR TORQUE WRENCH MAXIMUM RANGE IS AT LEAST OVER 200 FT LBS TORQUE.YOU WILL ALSO NEED A AXLE NUT SOCKET.ITS A BLACK SOCKET LIKE IMPACT SOCKET.ITS GRADE 8 STEEL.YOU HAVE TO USE THIS TYPE.A REGULAR SOCKET WILL BREAK.WHEN REMOVING AXLE NUT.ITS ON TIGHT.YOU WILL ALSO NEED A 1/2 BREAK BAR TO BREAK IT A LOOSE.ALSO REMOVE WHEEL COVER.WITH CAR WEIGHT ON WHEEL YOU HAVE TO LOOSEN AXLE NUT A LITTLE.NOT ALL THE WAY UNTIL YOU GET CAR OFF GROUND.WORK SAFE BECAREFUL.

Oct 28, 2009 | 2000 Ford Taurus

1 Answer

1998 ford Taurus 24v DOHC Overheating not thermostat


check to see if eans coming on if they dont then its fan relay if they are the rad is pluged or ther is an air pocket in the cooling system there should be a bleeder on it

Oct 06, 2009 | 1999 Ford Taurus

Not finding what you are looking for?
2000 Ford Taurus Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...