Question about 2000 Chevrolet Venture

2 Answers

Were are freeze plugs located on chevy venture

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,869 Answers

As on any engine the freeze plugs are located along the sides of the lower engine block They look like large 1/2" to 1" brass or silver concave disks pressed into the engine block. They protect the block from cracking by poping out when the block coolant freezes.

Posted on Oct 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 171 Answers

All over the engine block and the cylinder heads.
If one is leaking and and you can't see see it --its a matter of pulling the engine out.
Or if you can see it you could pop it out and put in one of those quick rubber type plug , avaliable at any auto parts store,

Posted on Oct 05, 2009

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22156 Answers

SOURCE: where are the freeze plugs on 1998 chevy venture

whats a chevy ventura looking like ?? iam a europeon mechanic and never seen one to be honest but if you look around the head you will find the core plugs at the back front and sides where the molten metal is poured into the sand mould and the aperatures let the air out and the sand mould after it has cooled

Posted on Oct 30, 2011

  • 172 Answers

SOURCE: where is chevy venture 2004 thermostat housing

Not familiar with this specific model, but usually the thermostat housing is on the engine where the upper radiator hose attaches. Remove the upper hose at the engine (drain the coolant first of course), and you should see a couple of bolts that hold the housing onto the engine. There may also be a small bypass hose (about one inch in diameter, and 4 to 6 inches long) going from the housing back to the engine. If so, remove it from the housing as well.

There is a drain on the bottom of the radiator, on one side. It usually has a little handle on it, and turn the handle counter-clock-wise to open it. It may be only 1/4 turn, or it may turn several times.

There may or may not be drain plugs on the engine block itself, some engines have these and others don't. They will be near the bottom of the engine block, just above the oil pan, you will have to be under the engine to find them. There may be one or more, they may be on one side or opposite sides.

Posted on Sep 05, 2010

Testimonial: "very helpful"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Are there freeze plugs behind tranny on a 94 4.3 chevy engine


Gene, there are freeze plugs on the engine in which transmission would have to be removed to access. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Replace Freeze Plug On GM 4 3 V6 Engine
Block Plug Basics Tech Article Chevy High Performance Magazine
4 3L Freeze Plug Locations Blazer Forum Chevy Blazer Forums

May 11, 2016 | Cars & Trucks

1 Answer

Location of orifice tube in 2000 chevy venture


best advice is the method i would use to located the orifice tube in the 2000 chevy venture. check the automotive repair book section in your local library. Most libraries have repair manuals on their automotive shelf section. find the a/c manual for your year and model car. make a copy of the page that has the information you need. you will need to make a copy because the library will not let those manuals be checked out. you might want to google for the location of the orifice tube location. I hope this helps.

Jun 18, 2014 | 2000 Chevrolet Venture

2 Answers

Location airbag sensors on a 2001 Chevy Venture


Not being too familiar with the Chevy venture apart from being in the vacinity of the radiator somewhere the only other option I would of thought is on the front part of a chassis rail where the bumper bolts to my reason being is that you would not want the airbags to deploy from a slow impact but a more fierce impact when damage could start to crush the front part of the chassis then the airbags would be deployed

May 19, 2014 | 2001 Chevrolet Venture

1 Answer

Need location of radiator plug on 2004 chevy venture


If it has one it would be on the bottom of the radiator. Most cars and trucks today don't have a plug or valve.
You are expected to use a recycling machine to flush the coolant.

Jan 31, 2014 | Cars & Trucks

1 Answer

I need to change my freeze plug for my 1997 Chevy venture van. And I need to know how because the transmission is in the way. Because when I put water in my radiator it pours water out of the back of the...


Good Article with Pics....
http://www.circletrack.com/enginetech/ctrp_0811_freeze_plugs/photo_01.html

Buy BRASS freeze Plugs (First Pic)


Pull the Freeze Plug Out. (Second Pic)

Use a Sealant or Locktite (3rd Pic)

Drive in with a Socket (4th Pic)



You need to pull the Freeze Plug out, clean the Block to ensure that is will seal in there good, Take a New Freeze Plug and a Socket. Then you want to seat the CURVED SIDE INWARD (The Bottom the of the Cup Inwards)....
511f3697-0d11-4cd0-8dc3-25efabf039fd.jpgf0d3b3ea-543b-4045-92b6-a2834a77aa76.jpg1513f71d-c426-46dc-9d82-8d9d9a5786cf.jpg50195c5a-748b-4465-9ddb-0bba5cc42bea.jpg

Apr 06, 2013 | Cars & Trucks

1 Answer

Where are the freeze plugs on 1998 chevy venture Cylinder Heads


whats a chevy ventura looking like ?? iam a europeon mechanic and never seen one to be honest but if you look around the head you will find the core plugs at the back front and sides where the molten metal is poured into the sand mould and the aperatures let the air out and the sand mould after it has cooled

Oct 29, 2011 | 1998 Chevrolet Venture Cargo

1 Answer

Coolant fan temp sensor location on a 2003 chevy venture


located in thermostat housing or in intake nearby (where top hose connects from radiator to engine)

Jul 13, 2009 | 1997 Chevrolet Venture

2 Answers

2001 Chevy Venture Cooling Fans always running on high


either the temp sensor is bad but, it sounds like the fan relay is stuck.
replace the relay its in the fuse box.

Mar 23, 2009 | 2000 Chevrolet Venture

Not finding what you are looking for?
2000 Chevrolet Venture Logo

925 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...