Question about 1998 Honda Accord

Open Question

Honda Civic 98 LX Error code P0141

How can I fix my car problem with error code of P0141 & P0135 ??

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 25 Answers

SOURCE: 2003 Honda Civic -LX Timing belt

I tried to get my timing belt/water pumped changed at 96,000K's and my dealer told me the belt in our 2003 Civic is good for 7 years or 168,000K's. I didn't believe him, so I called another dealer out of town and they told me 7 years or 184,000K's.

Posted on Jun 20, 2008

  • 141 Answers

SOURCE: changing oxygen sensor for a 2000 honda civic lx

both are located in the exhaust system. You have to get the car off the ground and follw pipes. You cant miss the O2 sensors.

Posted on Jan 15, 2009

Molson02536
  • 3854 Answers

SOURCE: replaced both sensors in a 2004 Pontiac Grand Prix P0135 P0141

A code P0135 may mean that one or more of the following has happened: = O2 Heater element resistance is high
= Internal short or open in the heater element = O2 heater circuit wiring high resistance = open or short to ground in the wire harness. 
What to do; = Repair short or open or high resistance in wiring harness or harness connectors.
= Replace oxygen sensor (cannot repair open or short that occurs internally to sensor)
A code P0141 may mean that one or more of the following has happened:

Same as above: mentioned in P0135.
What do do is the same as above, so i am leaning towards and faulty wire harness since you have replaced both O2 sensors. Make sure the wire harness has no break in it or crushed connection clips. The other thing to look for is a bad fuse that is used to heat up the O2 sensor. It may not say O2 sensor on it, it may piggy back off something else so check all the fuse and make sure the O2 has a good ground and not corroded. Good luck and hope this helps. 

Posted on Jun 25, 2009

philschneide
  • 448 Answers

SOURCE: I Have an Honda Accord 2003,4 doors, 4 cil.

Code PO-141: Downstream Oxygen sensor, heater circuit malfunction.
Code PO-457: Evaporative emission (EVAP) system, leak detected or fuel cap loose or missing.
Sometimes you can get a PO-457 if you overfill your gas tank.
Hope this gets you started on a fix.

Posted on Nov 10, 2009

  • 1 Answer

SOURCE: need to replace distributor on 99 honda civic lx

How do you install a distributor on a 1999 Honda Civic?

Posted on Oct 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why doesn't this 2000 Honda civic lx turn over when everything else works inside the car?


Honda Civic Coupe Questions - car will not start. battery ok ...

www.cargurus.com > Questions > Honda > Civic Coupe

CarGurusJul 9, 2008 - Get someone to turn it over and see if it is getting spark. ... i have the same issue with my 1993 civic lx it has a 1.5 sohc non-vtec i changed ... comes wen the 2nd click of the main relay it doesn't occurs until after few minutes, few .... My 2000 Honda Civic Ex Vtec will not start, has a new tps, new throttle body, ...

Part 1 -How to Troubleshoot a No Start (1.6L Honda Civic)

troubleshootmyvehicle.com > Honda > 1.6L
Dec 31, 2012 - Difference Between a No Start and a No Crank Condition. ... can cause your 1.6L Honda Civic (Civic del Sol) to Crank but Not Start. ... In other words, the engine doesn't turn over at all. ... 1995, 1996, 1997, 1998, 1999, 2000.

98 Honda civic won't crank (PushStart) - YouTube

? 4:11
https://www.youtube.com/watch?v=X5W7OqjKB8I
Oct 21, 2013 - Uploaded by SkzDaniel
Honda Civic won't start or crank with the clutch but goes on when you push start it. ... 2000 Honda Civic LX with new battery and starter. Still will ...

2000 Honda Civic LX with new battery and starter. Still will ...

? 6:34
https://www.youtube.com/watch?v=p7KAO__nM1s
Aug 21, 2013 - Uploaded by Robert SnyperMD
2000 Honda Civic LX with new battery and starter. Still will not start. ... Crank, No Start Diagnosis Honda Coil test. - Duration: 11:17. by ...

Jan 05, 2016 | Honda Cars & Trucks

1 Answer

Honda civic p0135 code


Error Code: P0135
Description:
Heated Oxygen Sensor (HO2S) 1, Bank 1 - Heater Circuit Malfunction
Possible Cause:
Fuse.
Heater relay.
Wiring.
Heated oxygen sensor (HO2S).

Jan 11, 2014 | 2001 Honda Civic

1 Answer

1996 honda accord o2 sensor versus Catalytic converter codes p0135 and p0141


The fault code P0135 means O2 Sensor Heater Circuit (Bank 1 Sensor 1)
The code P0141 means O2 Sensor Heater Circuit (Bank 1 Sensor 2)

Launch X431 Connector

Aug 22, 2012 | 1996 Honda Accord

1 Answer

1999 Ranger IAC and PCM problems


i would start looking for vacuum leaks first,

Jun 20, 2012 | 1999 Ford Ranger SuperCab

1 Answer

P 1705 code, honda civic lx 2001


Have tranny serviced . Check tranny fluid level fill with HONDA ONLY fluid. If not fixed have fluid drained and filter replaced on tranny

Jan 21, 2010 | 2002 Honda Civic

1 Answer

My 98 honda civic Lx wont shift into gear


check your shift linkages if the bushing is worn out you may have problems shifting or it could be a bad transmission

Dec 25, 2009 | 1998 Honda Civic

2 Answers

Replaced both sensors in a 2004 Pontiac Grand Prix P0135 P0141


A code P0135 may mean that one or more of the following has happened: = O2 Heater element resistance is high
= Internal short or open in the heater element = O2 heater circuit wiring high resistance = open or short to ground in the wire harness. 
What to do; = Repair short or open or high resistance in wiring harness or harness connectors.
= Replace oxygen sensor (cannot repair open or short that occurs internally to sensor)
A code P0141 may mean that one or more of the following has happened:

Same as above: mentioned in P0135.
What do do is the same as above, so i am leaning towards and faulty wire harness since you have replaced both O2 sensors. Make sure the wire harness has no break in it or crushed connection clips. The other thing to look for is a bad fuse that is used to heat up the O2 sensor. It may not say O2 sensor on it, it may piggy back off something else so check all the fuse and make sure the O2 has a good ground and not corroded. Good luck and hope this helps. 

Jun 25, 2009 | 2003 Honda Accord

Not finding what you are looking for?
1998 Honda Accord Logo

Related Topics:

901 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...