Question about 2000 Toyota Corolla

Open Question

Car radio security code for Toyota Corolla Model 2000 and entering procedure. Radio No.32802 Radio not working after battery was replaced.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: radio code

turn on the key
the radio will say code
just start entering the code via the preset numbers.
When the correct code is entered the radio will switch from displaying code to the normal display.

Posted on Jul 16, 2008

  • 2 Answers

SOURCE: Remove the radio from 1997 Toyota Corolla

i have a 97 corolla as well, and i've changed the radio out several times on my own. if you take a small screwdriver and stick it in between the panel that goes around the around the area where the radio is, u should be able to pry it off relatively easy. just be sure to remove the sliders off the AC controls before you do. after you pop that panel off, you just have to disconnect the wiring harnesses going to the clock, hazard lights, rear defroster, and AC button. the radio is bolted in there with a mounting bracket, so you'll have to unscrew that as well. you'll need to unscrew that bracket from the radio you have in there, and mount it to the one you wanna install....hopefully this helps you out. it sounds harder than it really is.

Posted on Sep 17, 2008

Murphybanton
  • 2004 Answers

SOURCE: Need Toyota radio security code

In my country Nigeria it is not an issue at all. But you can make do contacting Toyota with your Vin No. and proof of ownership. http://www.toyota.com

Posted on Mar 17, 2009

jimboz4
  • 305 Answers

SOURCE: 2005 Toyota Corolla Radio fuse

Pg. 250 of your 2005 Owner's Manual shows the location of the Fuse Boxes. There is one under your hood on the driver's side and the other is under the dash just to the left of steering wheel. Pg 272, will show you how to replace the fuses. Pg. 286-287 gives a diagram and description of each fuse and what part of the electrical system it enables.
This portion of the electrical system correspondeds to the fuse in position 32 on pg. 287 of the manual.
Your going to have to get on your back with a flashlight and open up the fuse box under the dash by the steering wheel. The lid of the fuse box shows the positions of the fuse and their amperage rating. Like I said, replace the fuse in postion 32 (15 Amp). There is a spare 15 Amp fuse in the fuse box under the hood (easy to get to, see the diagrams in the owner's manual). There is also a fuse puller tool next to the spare fuses.

Posted on Aug 11, 2009

Murphybanton
  • 2004 Answers

SOURCE: I need the Toyota AM/FM radio model 37409 Security

Visit http://www.radio-code.com/index.htm

Good luck.

Posted on Oct 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I managed to cancel code to reset the radio for my Toyota Corolla 2007 Ascent after I changed a new battery. What should I do now with 3 lines --- appear? Do I have to key in my own choice of numbers?


toyota ascent are fitted with different radios during the model production run

the glove box owner manual should have a card with a 3 or 4 digit number you enter into the radio
.if missing contact or take the ascent to a toyota service center and you get the correct code using the vin number

May 31, 2016 | 2007 Toyota Corolla

1 Answer

How do I unlock my radio buick regal 2000


You will first need to get your radio 'security' code: it is usually provided with the original car user manual and documentation.

Car comes with different radio model, so you will need to consult the specific radio model user manual to enter the security unlock code.

Hope it helps.

Apr 27, 2011 | 2000 Buick Regal

1 Answer

How do i take out my radio from my toyota corrola


The Toyota Corolla has been around long enough that many owners find themselves needing to replace the factory stereo. Installing a new stereo in the Toyota Corolla gives improved sound and updated features. Swapping out the stereo in the Toyota Corolla takes basic tools and less than an hour. This article covers models from 1990 to 2000.

Open the hood and remove the negative battery cable from the terminal. Apply the parking brake and place the car in "D."

    > Remove the trim from around the stereo by prying with your fingers at one corner. Some early models have two screws at the top of the trim piece to remove first. Allow the trim to hang on the drivers side of the dash if it's connected to the cigarette lighter.
    > Locate and remove the four screws holding the stereo in place. Pull the radio out of the dash and disconnect the wires from the back of the head unit.
    To install
    > Connect the wiring harness adaptor to the original harness and let it hang from the dash. Slide the new stereo into the Toyota radio mounting kit, which is a thin metal cover and secure it per the manufacturer's instructions. Most adaptors have screws to hold the stereo in place, however some have clips, which engage automatically.
    >Plug the wiring harness adaptor and antenna wire into the back of the new head unit and push the entire assembly into the dash. Reconnect the negative battery cable and turn the radio on.
    > Ensure all of the stereo controls and speakers are working. Secure the radio in the dash with the original four screws and replace the trim.

Dec 05, 2010 | 1990 Toyota Corolla

1 Answer

How do i enter radio code on my 100S 2000 model landcruiser


unfortunately, this is a security measure added to most manufacture radios today

if you are lucky and have the original paper work in the glove box you should find the radio code

otherwise, if you talk nicely to your local dealer and tell them how much you love your car and the factory radio, they may unlock it for you....Make sure you tell them you would HATE to replace it with an aftermarket radio, but if you have to pay $100 for the code that is what you are going to do.


Keep us posted and let us know if you have any luck at the dealer

Apr 24, 2010 | 1997 Toyota Land Cruiser

1 Answer

I am trying to install a new stereo into my toyota corolla 2000 how do i match up the wires to the new stereo


go to a radio store or walkmart on auto movil have a wire plug for every radio anc cars and model you connet the plug to radio and plug in to the car radio plug ant that it

Dec 29, 2009 | 2000 Toyota Corolla

2 Answers

How do I reset the security code on the radio


you can try to disconnect the battery for a minute but most likely a scanner need to be pass on the car and to reset thanks pierre

Mar 02, 2009 | 2000 Toyota Corolla

Not finding what you are looking for?
2000 Toyota Corolla Logo

Related Topics:

1,087 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...