Question about 1996 Honda Accord

1 Answer

How to check engine lgiht with paper clip - 1996 Honda Accord

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 144 Answers

I am sending you a exploded view of the location of the service check connector, this is a two wire connector that can be jumped with a paperclip to access your trouble codes. To check the codes while ignition switch is off jump your two wire connector with a paperclip. Turn ignition switch on while watching your MIL lamp for the series of long and short flashes, the long flashes indicates the number in the 10s column. The number of short flashes indicates the number in the 1s column. For example, 4 long flashes followed by 3 short flashes would indicate DTC 43. I hope this will be of some help to you, good luck

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1992 jeep cherokee laredo will start and stay running but wont charge the battery


An easy test to see if the alternator Is charging, is to place a paper clip against the rear bearing cup (the back of the alternator case in the center) While the engine is running, the paper clip will be attracted to the bearing if the alternator is good. Do not short the paper clip to any wire terminals to avoid a burn hazard. Be careful of rotating belt and pulleys.

Jun 06, 2017 | Jeep Cars & Trucks

1 Answer

My 95 honda accord won't go past 50 mph


your vehicle is running in "safe mode" or in "limp mode"

do you know how to use a paper clip to jump the 2 terminals and access the honda's OBD1 trouble codes?


Check Engine Light Codes



eric used a piece of wire, but you can use a paper clip

Apr 13, 2015 | 1995 Honda Accord

1 Answer

Both fans on the front an back of radiator does not come on an engine will over heat at stop signs.


check fuse and relay if both good then bad fans to check if the fuse or relays are good use a paper clip use both ends of paper clip on each side of the conection of the fans while your key is on the on position if fans work you got a bad fuse or relay

Jul 03, 2014 | 1998 Buick Century

1 Answer

How to use the paper clip check


that trick is good for GM cars 1994 and down,but if you try that on a new car good luck you will fry the ECU

Dec 06, 2012 | 1999 Daewoo Lanos

1 Answer

My 1995 jeep grand cherokee has power starter is turning over but jeep wont start.


Please check if there is spark at the output of the ignition coil, situated on the left side (passenger side) of the engine.
1. Get a paper clip.
2. Remove coil wire from the distributor cap. Double check that the other end of the wire is firmly snapped onto the coil terminal
3. Place paper clip inside the loose coil wire end, making sure it makes contact with the coil wire conductor, and let it protrude from the end of the wire.
4. Using pliers with insulated handles, hold the end of the wire with he protruding clip ~3/8 in. from the terminal of the cap where you disconnected the coil wire,while an assistant turns the key for 3-4 seconds.
Caution: Stay clear of the fan and any rotating pulleys.
5. Is there a spark arcing from the coil wire paper clip to the terminal on the cap?
6. If so, what color?
7. It should be bright white in color.
8. If blue or orange, the coil may be at fault.
9. If no arc, the coil is bad.

There is a tool available at the auto parts storethat can be clipped onto the coil wire and it will indicate the condition of the of the coil output.

May 07, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Vehicle turns over fine but will not start


Have you checked to see if there is spark at the plug wires? You pull one boot off of your spark plugs and stick a paper clip or something metal into the plug wire then have someone turn the engine over while you ground out the plug wire with the clip in it. See if there is any spark. Be careful not to touch the paper clip while they are turning the engine over or you might feel a slight shock. Did you happen to check to see if you had enough fuel pressure? I have the pressure reading you should have on your vehicle. Get back with me as to what you have tried or when you see if there is spark.

Sep 11, 2009 | 1995 Jeep Grand Cherokee

3 Answers

Check engine light is on...bank 1 sensor1 oxygen sensor


if u have one oxygen sensor then u need to take a deep look at the bottom of ur car it will be somewhere at the Exhaust pipe if u have a catalytic converter then u will have two oxygen sensors one before the catalytic converter & the other will be after the catalytic converter. Note: the catalytic converter is located at after a little bit of beginning in Exhaust pipe.

Jun 06, 2009 | Dodge Grand Caravan Cars & Trucks

1 Answer

Check engine light comes on only sometimes and it on off again is there a code now or dose it have to stay on


No you should be able to pull it. You only need a paper clip to pull it of that
Finder the connector in this picture under the driver side of the dash. With the key in the on position but the engine NOT running put the paper clip in the A and B slot (top 2).
Now the code will blink through the engine light. The first code will be 13. 1 flash STOP and 3 flashs then STOP. It will do that 3 times. After nujmber 13 that will be the problem code.
Come back and post and I will help more.

http://www.2carpros.com/forum/automotive_pictures/62217_GM_DLC95_Older_17.jpg

Mar 29, 2009 | 1993 Chevrolet K1500

1 Answer

Location of the camshaft position sensor on a 1999 hyundai sonata


It is located at the right top of engine (V6). Looking from the front of the car, it is just past the plastic cover over the engine. It has a silver clip (looks like a paper clip). remove clip and unplug sensor.

Aug 28, 2008 | Hyundai Sonata Cars & Trucks

Not finding what you are looking for?
1996 Honda Accord Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...