Question about 1989 Toyota Pickup SR5

1 Answer

Different 4wd settings

Would like to know about the different 4wd settings and how and when to use them. Also help with manual locking hubs. Do not have owners manual.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

You should have 2 hi 4 low 4 hi and nuetral on your transfer case 4 hi would be anything up to 35-40mph or lower 4 low is almost never used it just gears down your t case if your climbing a hill or super stuck the manual locing hubs are extremely reliable do not have them locked on dry pavement or concrete just loose dirt snow ice ect put the tranny gear shifter in nuetral to put your t case in 4 low

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Why doesn't my 4x4 work


Do you have mechanical-shift four wheel drive,or electronic-shift, 4WD system ? Any lights lit on the dash ?
The electronic-shift, 4WD system consists of the following components:
  • Transfer case (For transfer case repair procedures, refer to Section 308-07B ).
  • 4WD control module (For 4WD control module installation, refer to 4WD control module in this section.)
  • Mode select switch (MSS)
  • Gearmotor encoder assembly
  • Automatic locking hubs (hub locks)
  • Pulse vacuum hub lock (PVH) solenoid and vacuum lines
  • The mechanical-shift four wheel drive (4WD) system consists of the following components:
  • Transfer case (For transfer case repair procedures, refer to Section 308-07B ).
  • Transfer case shift lever
  • Manual locking hubs
  • 4x4 indicators
  • Shift linkage (hub locks)

Dec 12, 2014 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

How to replace front wheel bearing?


old post, but you are first to say front. many others fail to say end of car.

is your car 4wd, as 2wd is different rules. so...??????

I toss coin land on 4WD.

2000 front wheel bearing

got it.

the 2000 year, is important.

this year is the last year, before non untized hubs.

http://www.fixkick.com/hubs/FW_BEARINGS.html#newer



my posts is for stock cars. only, and USA spec, cars.

other countries, evolve this in different years.



2000 (never 2001+)

fsm quotes



  1. Before servicing the vehicle, refer to the Precautions section.


  2. Remove or disconnect the following:



    • Front wheel


    • Brake caliper and rotor


    • Locking hub or hub drive flange, if equipped,(it is)


    • Hub grease cap, if equipped


    • Wheel speed sensor, if equipped (ABS)


    • Wheel bearing lockwasher


    • Wheel bearing locknut (ring) and inner washer


    • Wheel hub and bearing assembly (slide hammer?)


    • Wheel hub oil seal


    • Wheel bearing oil seal


    • Snapring




  3. Press the wheel bearing and race out of the hub.


reverse is same but the lock ring must be set

to 123-180PSI. stop tightening above 123 at first alignment hole in lock ring..

Jun 26, 2014 | 2000 Suzuki Grand Vitara

1 Answer

I purchased a 2003 f250 4wd super duty with manual hubs last night. No owners manual. Which way do i turn the hubs to lock them? No markings on the hubs themselves.


A easy way to check and see would be to lift the truck up off of the tires and see which position the hubs are in when the front tires spin.

Oct 12, 2013 | 1994 Ford F250 Supercab

2 Answers

Front drive shaft not fully engaged in 4WD, with truck on stands all 4 wheels do rotate but if i stop front wheels the front drive shaft is not engaged


Hi,
Do you have auto locking hubs on the front wheels, or manual locking hubs?
If you have auto locking hubs chances are they are not engaging properly and will need to be removed and spline sets checked for broken teeth on locking hub and locking shaft.
If you have manual locking hubs then check that they are firm when turning to engage them in the lock position.If they are light when engaging them to the lock position then they my have broken/worn out the locking hub and spline. Also check that the engaging spring inside the hub has enough tension to engage the hubs they may be broken. If the hub are all ok then you have a problem in the transfer box, where the 4WD lever is not meshing the transfer box properly. Hope this helps, let me know how you get on.

Jason

Apr 04, 2010 | 2002 GMC Sierra C/K1500

1 Answer

1990 toyota 4cly 4x4 pickup need to know where fuel pump relay switch is. I don't have the manual. No power to pump. I ran another set of wires to pump with relay switch for now until I can figure out...


my 1990 toyota 4wd manual tranny wont go into 4wd.
the 4wd light does not come on but the vehicle feels like it is in 4wd, is there a electrical switch that controls this issue ie; the hubs don't lock in.

Mar 20, 2010 | Toyota Pickup Cars & Trucks

2 Answers

My 2006 Hummer H3 is having the same issue with the Four-wheel drive button. Do you put the vehicle in park then neutral and then select 4Up? I was told to drive it backwards to unlock it if it doesn't...


It doesn't take long to learn when and how to use your truck's 4WD system. Follow these steps and you'll feel confident about engaging the system the next time you need to get out of a slippery situation.

For a conventional system, where you can select 2WD or 4WD, the instructions refer to engaging 4WD. For trucks with permanent 4WD, they refer to locking the center differential.

Time Required:
varies
Here's How:
  1. Refer to your owner's manual to find out how to engage your truck's 4WD mechanism.
  2. When driving in snow, mud, or just going off road, shift into 4WD when you get ready to leave solid ground. If you have lockable front hubs, lock them for those operations.
  3. For severe conditions, use low range if available. Before shifting into low range you must either stop or slow down to at least 3 mph to prevent grinding gears.
  4. When you return to normal conditions, shift out of 4WD or unlock the center differential. If the shifter doesn't want to move from 4WD or the differential lock stays engaged, don't panic, becaue the problem is normal and is caused by pressure on the gears.
    • Try backing in a straight line about 10 feet and try to move the shifter again.
    • If the shifter still won't move, try backing in an "S" pattern while trying to move the shifter.
  5. If you have lockable hubs, don't forget to unlock them when you return to dry pavement.
Tips:
  1. Vehicles with permanent 4WD are set up for everyday driving, but not necessarily for maximum traction on slick surfaces. Engaging the differential lock increases the vehicle's traction capabilities.
  2. Do not operate a locked 4WD on dry, hard surfaces. Doing that could cause damage to the driveshafts, differentials or transfer case.
What You Need:
Owner's Manual

Good luck and remember to rate this solution.

Thanks for using Fixya.

Mar 07, 2010 | 2009 Hummer H3

2 Answers

Front end growls when in 4 wheel drive


Before using the 4wd, did you have the transfer case, front differential, and front axle locking hubs inspected, properly lubed, and tested? No one ever does, so don't feel bad if you don't know what shape the 4wd components are in. You probably haven't used 4wd in last five months. Most people don't ever put their 4wd vehicles in 4wd mode, even though the service manual says to operate the vehicle for a minimum of 10 low speed miles every 3000-4000 miles. This helps maintain the proper function of any limited slip parts, internal bearings, and gear components. Operating in 4wd periodically also helps insure any electric devices are working. What you may be hearing is the unused front differential parts, transfer case bits, or electrically controlled locking hubs wearing out from the lack of use, proper maintenance, or just plain age (after all you did say it's a 2001). Front pinion and differential bearings are not usually ever spun/rotated unless the transfer case and hubs are locked in 4wd. If they were starved of gear oil, or dry when you went 4wheeling, you torn them up. Refer to the owner's manual (if you still have it) for proper 4wd opration. You'd be surprised that there are proceedures to do in order to maintain a reliable vehicle. Don't ever just drop it in gear and expect it to work..... I mean come on.... after all, It is a Dodge! Your next step is to find a full service mechanic, with a complete selection of tools and shop supplies (especally a hydrolic press) and schedule an appointment to have the 4wd front components inspected and replaced if neccessary.

Oct 10, 2009 | 2001 Dodge Durango

1 Answer

95 dodge 2500 4x4 front axle clicks in 2wd not 4wd when engaged


Do you have automatic locking hubs? Do you need to turn hubs on wheels in order to have 4 wheel drive work? If all you do to get in 4wd is move shifter, then you have automatic locking hubs. The clicking indicates that the hubs are not fully disingaging. To check, block rear wheels, jack front up, and turn tire. the axle should not be turning...if it is, hub is still ingaged....time for new hubs.....if hubs are bad, and you want to save money, you can purchase a set of manual hubs made by (WARN)...its more than half the cost, but you will have to turn hubs to lock and unlock manually. Note...you still need to use the gear selector to put and take out 4wd.

Jul 05, 2009 | 1999 Dodge Ram

1 Answer

Manual 4WD 1991 f250 Help Needed to remove Front hubs to do rotor


unscrew all of the screws around the hubs and never resurface rotors on them,buy new

Apr 18, 2017 | 1991 Ford F250

2 Answers

Replacing brakes & re-surfacing rotors 4WD f-250 1991


need to know if the hubs are auto locking or manual. the bearings have different locking set ups.

Mar 23, 2009 | 1991 Ford F250

Not finding what you are looking for?
Cars & Trucks Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...