Question about 1989 Chevrolet C1500

1 Answer

2003 suburban is not getting fire to the fuel pump checked all fuses and relays

Posted by on

  • petersfan761
    petersfan761 May 11, 2010

    You mean fuel to the fuel pump?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Check the wiring to the pump and check to see if you have a good ground, also check out the fuel pump relay switch under the hood

Posted on Oct 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 ffv 5.3 chev suburban blows pcm 1 fuse with fuel pump ,mass air flow, evaporated purge , and pcm unplugged. Where do I go from here ?


PCM 1
15A
Powertrain Control Module (PCM), Mass Air Flow (MFS) Sensor, Evaporative Emission (EVAP) Canister Purge Solenoid, Fuel Composition Sensor, Secondary Fuel Pump Relay ( with dual tanks)

Mar 23, 2015 | 2003 Chevrolet Suburban

1 Answer

My fuel pump is not getting any power the fuses are ok


Check the fuel pump relay located in the fuse panel under the hood. Switch it temporarily with the horn relay or the a/c relay. Check for power at the pump. If it starts it's fixed and u now have a horn inop or ur a/c is inop. Change relay is the fix. If no power to relay check wires for corrosion and check continuity. If wires are good and you end up with power at the tank , then the problem might be that u need a fuel pump rockauto.com has great prices . Check em out! Have someone set ebrake and turn the key holding it in the on position. Bang on the tank with a rubber mallet. If it starts u kno it needs a fuel pump.

May 28, 2014 | 2003 Chevrolet Suburban 1500

1 Answer

No fire 2 fuel pump on 2002 suburban


Have you checked the fuel pump relay yet ?
It should have power for three seconds when you turn the key switch on, then power after the engine starts.

Jan 22, 2013 | 2002 Chevrolet Suburban

1 Answer

Lost power to the fuel pump going down interstate


1. The fuse for the fuel pump may have blown or the fuel pump Relay may be faulty. If you have not done this already, check the fuse and replace it if it is blown. When replacing the fuse you must use one of the correct amperage. If it requires, for example, a 15 amp fuse, that is what you must use.

If the fuse is OK then replace the Relay for the fuel pump and re-check.

The location of the fuses and relays for the vehicle are shown in your owner's manual.

2. Check the wiring to the fuel pump.

3. On further testing, the fuel pump itself may be faulty and require replacement.

Nov 25, 2010 | 2003 Chevrolet Suburban

1 Answer

Is not firing.


you need to check the fuses and the fuel pump relay also check the wiring give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your SUV wish you the best of luck Michigan Man.

Feb 02, 2010 | 1990 GMC Suburban

3 Answers

2003 chevy 2500 6.0 replaced the fuel pump and it ran long enough to pull it in the shop now it wont run all I have at the furl pump is 5 volts replaced the relay and still no fuel pump can anyone think of...


Check the voltage at the relay.If its 12v comming out then you have a wire problem.Replace the wire from the relay to the pump.Hope that was helpfull good luck.

Aug 01, 2009 | 2003 Chevrolet Suburban

1 Answer

Trying to find the fuel pump FUSE.


There is no fuse specifically dedicated to the fuel pump on this year and model of Suburban. This Suburban is equipped with dual tanks and as such has two relay switches, primary and secondary, both of which are located at the main fuse box in the engine bay, that power up the respective fuel pumps.

The closest fuse (15A) controlling either of these relays also powers up the main control module (located beside and below the main fuse box). So, if one needs to disconnect the fuel pumps from functioning, then the only effective method is to disconnect the fuel pump relays.

May 27, 2009 | 2003 Chevrolet Silverado Ss

1 Answer

92 Chevy Suburban Electrical Fuel System


I assume the fuel pump fuse is good?
The only time voltage will be sent to the fuel pump will be the first 2 to 3 seconds if the starter is not engaged. You will want to crank the engine over and check for voltage on the load side of the relay, circuit #30 at the relay.
Let me know after you check.
Regards,

Feb 22, 2009 | 1992 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...