Question about 1991 Jeep Wrangler

1 Answer

My Mainenance light is on how do i fix it - 1991 Jeep Wrangler

Posted by on

  • yadayada
    yadayada May 11, 2010

    what does the light look like? is it yellow? help me out here, is it really a maint light or is it a warnimg light?.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

If the light was flashing when it came on, then it means your engine is misfiring.

A solid light can mean anything from a loose/faulty gas cap to a transmission issue.

This light comes on when the computer detects a fault of some sort in its diagnostic tests. If it keeps detecting this issue, the light will remain on. If the light turns off, then it has detected that the issue may no longer be present.

In order to find out what the exact reason was for your light, You need to have your car computer scanned to retrieve the code that the computer would have stored when the light triggered. Most garages will do this free of charge. The code will tell you what may have caused the light to initially turn on.

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mainenance required light on dash board on honda civic car


Press and hold the trip reset button, then turn key on and continue to hold (approx. 10 seconds) Light will start blinking then go out, Release trip button and your done. This is your oil change reminder light.

Dec 21, 2013 | 2005 Honda Civic

1 Answer

Just did an oil change on 2003 mercedes clk 320, how do I reset mainenance gauge


I am not sure of the particular model but as a general practice you can either
Press the two ( Mode + reset ) buttons together for few seconds
of try pressing the buttons for some time while you turn on the key ..
Of course the maker will give the exact solution than of any postings here
Thanks
Please rate my answer fairly and Support me With Regards and Season's Greetings Deepak Richard

Dec 14, 2010 | 2003 Mercedes-Benz C-Class

1 Answer

I have a 93 Nissan Altima (AT transmission) and while driving my car....sometimes the speed ometer stays on "0" and the RPM goes up while I have my foot on the gas and it sounds like it is stuck in first...


Speedometer failed when the cable is broken; if the gears wont egnage, its possible that you have any propblem in the Torque Converter or Solenoids. First try with mainenance and check fluids.

Sep 09, 2010 | 1993 Nissan Altima

1 Answer

Mainenance service warning lite changed oil after 1400 mile came on is there a reset


1. Turn the key to "on" so the electrical system is fired up (but engine is not running)

2. Set trip planner to "A" trip.

3. Turn key off (no electrical)

4. Hold down trip planner button, then turn key "on" so the electrical system is fired up (but engine is not running).

5. "Maint Req" light will blink several times then go off.

May 15, 2010 | 2008 Toyota Camry

1 Answer

Mainenance service warning lite changed oil after 1400 mile came on is there a reset


I'm glad your problem is fixed, please do not hesitate to contact again if you need any kind of technical assistance. would really appreciate your positive rating for the service, thanks!

Mar 30, 2010 | 2008 Toyota Camry

1 Answer

When do I change belts and hoses? 2005 Chevy Equinox


I would typically tell people to change them around 100K miles unless they see problems earlier.  Sometimes you don't even need to do it that often but I'm a huge proponent of preventative mainenance.  Just make sure that your hoses don't have any "soft" spots in them.  Squeeze them all over, especially in the bends.  Hope this helps.  Thank you in advance for an honest rating and for using FixYa!

May 19, 2009 | 2005 Chevrolet Equinox

1 Answer

98 breeze oil light stays on


The oil sending unit is failing they start to leak internally into the connector. Remove the connector and see if there is any oil in it.

Mar 19, 2009 | 1998 Plymouth Breeze

Not finding what you are looking for?
1991 Jeep Wrangler Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...