Question about Ford E-150

1 Answer

93 ford e150 wiring

I just replaced a 5.0L with a 5.8L engine in my 93 e-150. Kept the original transmission from the 5.0. My questions are #1 do I need to replace the powertrain control module? Do I, and how do I,need change the wiring around? I can't seem to find a wiring diagram that is very discriptive.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 127 Answers

Well the wiring for both engines is essentially the same. The only real difference between the two engines is about an inch of block height and piston stroke. Wiring should not have to be changed at all. You should replace the PCM, a 5.8 may run, but it will not run properly on a 5.0 PCM. I believe you should find the computer itself behind the passenger side kick panel. 10 mm socket releases the harness connector from the PCM then just rock it back and pull up. you might have to jiggle it a bit, but the 10mm socket is the only tool you should need.

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a tensioner pulley for a 93 Ford 5.8


Hello Bobbythegray,

They come in two flavors..

The PRECISE part & method would
require your model...

1). Just the "pulley" (as you indicate)
2). Tension ARM & pulley

PULLEY
http://www.rockauto.com/en/catalog/ford,1993,f-150,5.8l+v8,1122107,belt+drive,idler+pulley,6956

TENSIONER
1993 FORD 150 5 8L V8 Belt Tensioner RockAuto

Carnac the Magnificent

May 07, 2017 | Ford Cars & Trucks

1 Answer

Where is the neutral safety switch on a 1998 ford f 150 4x4


good question
up to 1997 it was still on the side of the gearbox
looks like it went full plastic after 1997

cant see why ford would change its location in 1998

I cant confirm where it is on a 98 4X4


new part suits f150
26339413-tatvs1i0o052r0jcnodwvepi-1-0.jpg NOS 1989-1996 Ford E150 1990-97 F150 F250 C6 Transmission Neutral Safety Switch 26339413-tatvs1i0o052r0jcnodwvepi-1-1.jpg

Nov 03, 2016 | Ford Cars & Trucks

1 Answer

93 e150 camshaft specs 5.8L


Factory camshaft specs:
5.8L (non lightning): Lift: .278" Intake; .283" exhaust.
5.8L Lightning: Lift .260" intake, .278" exhaust.
(No other specs given)

Base timing: 10* BTDC (Before Top Dead Center)

Apr 21, 2014 | Ford F-150 Cars & Trucks

1 Answer

My b/f's 2000 ford econoline e150 is having


Have you checked the transmission fluid? just make sure that when you check it, the engine is running

Jun 25, 2011 | 2003 Ford E150

1 Answer

I HAVE A 93 F150 THE E40D TRANS WENT OUT GUY SOLD ME ONE OUT OF A 99 IT BOLTED UP BUT THE STARTER WONT BOLT UP WHAT NEEDS TO BE DONE I HAVE 5.0L


YOU NEED A TRANSMISSION OUT OF 93 OR 94 FORD 150 THE 1999 FOR 150 HAD A 4.2 - 4.6 AND A 5.4 ENGINE.YOU MORE LIKELY GOT TRANSMISSION FOR A 5.4 ENGINE.1993 TO 1999 THATS A 6 YEAR DIFFERENCE.TRANSMISSION NOT GOING TO WORK.YOUR TRANSMISSION WIRING HOOK UP IS GOING TO BE DIFFERENT.

Apr 19, 2011 | Ford F-150 Cars & Trucks

3 Answers

What tuneup should I do at 65000


no tune up needed until 100000 miles. run a couple of fillups of Shell or Chevron premium gas thru it to clean out fuel system and clean engine. Walmart fuel station also have gas additive you can buy with your gas.

Mar 05, 2010 | 2003 Ford E150

1 Answer

Just put a tuneup on my ford f-150 93 and mixed up


Firing order is 1-5-4-2-6-3-7-8.
On the distributor,it goes counterclockwise (CCW). Passenger side is cylinders 1-2-3-4 (front to back). Driver side is 5-6-7-8 (front to back).

Sep 05, 2009 | 1993 Ford F150 SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...