Question about 1965 Ford Mustang

1 Answer

Thanks guru, were would you locate an engine number on a C5AE6016 motor and did they have a numbering system like we have today what system was in place back then, why i ask i have found an engine number on a different Mustang the same as my VIN number on my car Im looking at, strange or not, I was told the engine no. on the car Im looking at was C5AE6016 (5B11W) Thanks

Posted by on

  • Anonymous Mar 18, 2014

    Ihad to put 67 year does not go back far enough i have a 65 fairlane 500 stotion wagon and i can't locate the vin number

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 376 Answers

On the edge of the block by the trans mount, or on the side of the block by the oil pan.

Posted on Oct 04, 2009

Testimonial: "Thanks is there any other feed back regarding the other mustang engine number being the same as another mustangs VIN number"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the engine no located


to many engines out there to give a good answer

try this for now
nonspecific downloadble document on engine number locations

[DOC]Engine Number Location Chart No 2. - RVCS rvcs-prodweb.dot.gov.au/vehicle%20identification%20and%20engine%20number%2...
VSS VEHICLE IDENTIFICATION AND ENGINE NUMBER LOCATION CHART SYSTEM. GRIDLOCATION CHARTS ... Chassis Number Location Chart No 9.

May 19, 2016 | Cars & Trucks

1 Answer

How to remove old cylinder, everything is removed except small piece of steel above cylinder held by 2 pins


Make the FixYa experience better for everyone by voting.

Hi,

My name is Ben and I'm your guru, i.e., mentor, an influential teacher or popular expert: a management guru. - origin from Sanskrit, 'weighty, grave', for today.

Unfortunately you have not provide me with engine size, year, number of cylinders, etc. But don't despair because Chevrolet does provide a general or generic solution. Contained therein you might find your solution.

Set forth below are the eleven (11) steps required to remove a GM product cylinder head:

Remove or disconnect
  1. Intake manifold
  2. Exhaust manifold
  3. Rocker arm cover
  4. Electronic ignition and spark plug wires
  5. Alternator bracket
  6. One A.C compressor bracket bolt
  7. Power steering pump
  8. Belt tensioner assembly
  9. Fuel pipe heat shield
  10. Rocker arm assemblies and push rods
  11. Cylinder head bolts and cylinder head
All the best,

Ben

Sep 22, 2011 | Chevrolet Celebrity Cars & Trucks

1 Answer

Im trying to find crank sensor for 2000 dodge stratus 2.4,where is it located on motor


Make the FixYa experience better for everyone by voting.

Hi,

My name is Ben and I'm your guru, i.e., mentor, an influential teacher or popular expert: a management guru. - origin from Sanskrit, 'weighty, grave' for today.


Query: I'm trying to find crank sensor for 2000 dodge stratus 2.4,where is it located on motor

Response: On the passenger side of the engine. You'll have to go under the car and look for the harmonic balancer -- located on the end of the crankshaft and you should see it.It has 1 screw and it is on the engine under the passenger side under the tire by the bottom pulley.

All the best,

Ben

Sep 12, 2011 | 2000 Dodge Stratus

1 Answer

Where is the fuel system test port located on a 1995 grand am? the car engine has been stalling out, when first started not much power until the engine gets warm


Make the FixYa experience better for everyone by voting.

Hi,

My name is Ben and I'm your guru, i.e., an influential teacher or popular expert: a management guru. - origin from Sanskrit, 'weighty, grave'.for today, for today.

As you evaluate my advise and suggestions, there are a few things you must keep in mind:

• I did not diagnose your problem and am therefore only able to evaluate what you tell me. For example, if you ask me a fuse location, that doesn't mean that I can tell you the reason why the fuse blew.
• A thorough diagnostic approach involves the use of technical equipment, xuch as voltage meters. scanning equipment and other sophisticated devices.
• Lastly, fixing one problem can very easily reveal a problem with something that you might consider unrelated. If that happens, you might want to view me as being incompetent.

Subject: The steps one must take to measure the fuel pressure on a fuel injection engine

Customer's description: where is the fuel system test port located on a 1995 grand am? the car engine has been stalling out, when first started not much power until the engine gets warm

Discussion: Provide the customer with the response requested. However the problem may well be the idle relief valve, the crankshaft sensor, the camshaft sensor, or the fuel pressure sensor.

There is a large is attached to the fuel sender assembly to the top of the intake manifold and supplies fuel to the injectors. A fuel pressure tap is located on the rail for quick pressure checks.

If you don't have a pressure gauge, AutoZone will loan you one FREE.

HINT: Try and find an Actron CP9110 code scanner so that you can perform a full diagnosis of your problem.

All the best,

Ben

Aug 27, 2011 | 1995 Pontiac Grand Am

1 Answer

Where's the bank 1 sensor 1 located at my toyota sienna 2007, i know there are 3 sensors in bank 1 and 1 sensor in bank 2 if you can give me the image or view where they are located i really appreciate...


O2 sensors location is broken down like this. The bank refers to which side of the motor the sensor is on. Bank 1 is the same side of the engine as the number one cylinder. Bank 2 is the other side of the motor. Sensor refers to either before the cat or after the cat.

Bank 1 sensor 1 would be the O2 on the side of the motor that the number one cylinder is on and before the cat.

The number one cylinder is on the back side of the motor (the side closest to the firewall). The O2 sensor will be in the exhaust pipe near the exhaust manifold.

Apr 29, 2011 | 2002 Toyota Sienna

1 Answer

Where is the PCV valve located and can I change it out myself? Is that the most common reason for the check engine light remaining on? Frank


Hello! The Check Engine Light (CEL) comes on when the computer stores a fault...There are a very large number of reasons why the light is on...Take your vehicle to an auto parts store and they will run a scan of the On Board Diagnostics to identify the fault code...Codes begin with a letter followed by a 4 digit number...(P0401 as an example)...When you have the code send a comment and I'll solve the problem..The PCV valve on the 4.6L is located in the drivers side valve cover towards the back.......................Guru...saailer

Nov 30, 2010 | 2006 Ford Explorer

2 Answers

Working on a 2000 crown vic. 4.6 got a o2 code.. bank 2 sensor 1.. which one is that?? left side or right side??


okay to make it simole for you......bank 1 is the bank where number 1 cyl. is located,so in your case you need to go to opposite side of number 1 cyl that being bank 2,sensor one will be the first on in the exhaust stream,if you need more let me know. have a good day

Aug 10, 2010 | Ford Crown Victoria Cars & Trucks

2 Answers

WHERE IS NUMBER 6 FUEL INJECTOR LOCATED


The #6 fuel injector is located with the #6 cylinder and I have added a firing order and cylinder layout diagram that should help you out.


1730e85.gif

Jun 11, 2010 | 1993 Toyota Camry V6

1 Answer

I would like to know about an engine number they say it is number C5AE6016 (5B11W)its in a 65 F/B date 13T engine code A unit no. 157042 was there a 6016 block???


Yes. It had larger main caps than the typical 289 block. However there are variations on the theme and you could see a smallblock with a 6016 that predates the 289 alltogether (260 or smaller) as well as into the 70s even on a 351 windsor! Hopefully you have a hipo 289 bottom end with the larger caps and thats all you need to know.

Oct 04, 2009 | 1965 Ford Mustang

2 Answers

Just need to find engine number


Hi,

yep under the plenum, from on top you can only read half...you need to get under it to see the whole number...

check and let me know....

Thanks.

Jun 17, 2009 | 1989 Toyota Supra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...