Question about Oldsmobile Cutlass Supreme
You should have a heavy #10 red wire with an eyelet that will fasten to the stud on the back. You should also have 2 smaller wires ,14-16 guage, in a plug-in that slides into a slot on the top rear of the alternator. They are probably brown and red or orange. If for some reason, the plug is not there then the brown wire goes to the #1 or left hand tang, looking from the back. The red or orange goes to the #2 or right side. Make sure you use an insulated connector if you have to do this because voltage will arc between the 2 and short out your alternator. Hope this helps.
Posted on Oct 04, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 08, 2015 | Oldsmobile Cars & Trucks
May 09, 2012 | 1985 Oldsmobile Cutlass Supreme
Oct 16, 2010 | 1988 Oldsmobile Cutlass Supreme
Jan 10, 2010 | 1983 Oldsmobile Cutlass Supreme
Nov 29, 2009 | 1986 Oldsmobile Cutlass Supreme
Nov 20, 2009 | 1983 Oldsmobile Cutlass Supreme
Nov 16, 2009 | 1983 Oldsmobile Cutlass Supreme
Sep 11, 2009 | 1992 Oldsmobile Cutlass Supreme
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: