Question about 1994 Buick LeSabre

2 Answers

How do i replace the water pump in a 1994 buick lesabre?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi

Thanks for using FixYa. You’ll need to remove the power steering pump and pulley. Use a 13 mm socket and remove the two bolts that hold on the pump assembly. They are normal bolts that turn counter clockwise to remove. You don’t need to remove the pulley from the pump. Place your 13mm socket thru the holes in the pump to remove the two bolts.

When you remove the two bolts that hold the pump on, this will allow you just simply move the pump out of the way to remove water pump bolts


Please do rate the solution and revert for further assistance.


Thanks

Rylee

Posted on Oct 04, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Remove the belt by losining the tentioner pully with a wratchet or breaker bar...unbolt the watter pump clean the surface thouroghly...apply silicone sealer to bolth surfaces place gasket on pump and re assemble..refer to belt routing digram to re apply it.

Posted on Oct 05, 2009

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fyrebyrd1
  • 121 Answers

SOURCE: replace fuel pump in 2000 buick leSabre3.8 v6

You should be able to replace the fuel pump through the trunk. Beneath the carpet in the trunk should be an access panel. Once you remove that panel, all the electrical connections and fuel lines can be disconnected. Remember to disconnect the negative battery cable prior to service, and to take necessary precautions in regards to fuel spillage that may occur. I hope this helps.

Posted on Dec 02, 2008

  • 106 Answers

SOURCE: 2000 buick lesabre - water pump replacement

first disconnect the battery then check how the serpentine belt is lined up so u can take it off and put back on. Then the pump should be on the side of the motor with 9or12 bolts there could be more! after taking out take razorblad and skrap the old gasket clean wipe of then put new gasket and pump back on dont over tighten the screws cuase the pump my be aluminum.

Posted on Mar 19, 2009

tonycdrive
  • 2 Answers

SOURCE: 1997 Buick Lesabre Water Pump problem

THE POWER STEERING PUMP PULLEY --- ARRGGH...Not a problem. The power steering pump is held by two bolts. Use a socket and remove the top bolt and loosen the bottom bolt. Be careful not to completely remove the bottom bolt. The PS pump will loosen up enough so that you can push it towards the firewall and you will JUST have enough room to remove the waterpump bolts. Its tight but it will squeeze out.

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel pump fuse on 1994 buick lesabre


1994 Buick LeSabre has a fuel pump relay located in the relay center box (under hood) in position H.

Check Autozone

Duralast/Relay - Fuel Pump

May 06, 2016 | Buick Cars & Trucks

1 Answer

Repeat water pump failure. 1994 Buick Lesabre.original pump had bearing failure. 1st new pump shaft failure."no longer carried in stores". 2nd pump bearing failure. and now my 3rd pump starting...


If your car requires dex cool, than that is what you need to use. If not then don't. Different coolant types each have different lubricants for the pump. Have you checked the belt tension? Changed hoses?Made sure pump is receiving water?

Sep 04, 2011 | 1994 Buick LeSabre

1 Answer

1994 buick lesabre 3.8 camshaft sensor location


On the 3800 V6, the camshaft position sensor is located behind the water pump pulley. if you were to look at pulley straight on, it is at about the 9 o"clock position. good-day!

Aug 22, 2011 | 1994 Buick LeSabre

2 Answers

Cost to replace fuel pump for 1994 buick lesabre


Figure about 1.5 hrs of labor time and abour 70 bucks for the pump and new filter

Apr 10, 2011 | 1994 Buick LeSabre

1 Answer

Removing water pump from my 1996 buick 3800


Hello fellow Buick LeSabre owner. A few year's ago I replaced the water pump on my 1994 LeSabre and I too encountered a few obsticals. After I figured out how to address these problems I was thjen able to install my new water pump. To assit other LeSabre owners, I posted the actual process on the web. See the attached link for my solution ("Deano/Illinois") and several other comments from other Buick LeSabre owners. The entire process will take you about three hours. Good Luck!

http://wiki.answers.com/Q/How_do_you_replace_the_water_pump_without_removing_the_engine_mount_located_on_a_1995_Buick_LeSabre&updated=1&waNoAnsSet=2

Please rememeber to rate my solution. Thanks!

Jan 29, 2011 | 1996 Buick LeSabre

2 Answers

How do I change the water pump on a 1998 buick LeSabre?


it's easy and if you youtube it it will show you step by step , good luck

Jan 23, 2011 | 1998 Buick LeSabre

2 Answers

How hard is it to change the water pump on my 1991 Buick Regal 3.8 engine. It is not leaking but car keeps getting hot, I have changed the radiator


The pump is not that hard to change but if you haven't tried a new thermostat yet then i would suggest that you try that first,it is the most common cause of overheating problems,next being the rad fan it's self not coming on either because of a bad motor or a temperature sensor failure or a defective relay.Let me know what you have eliminated and we can go on from there.

Sep 12, 2010 | 1995 Buick LeSabre

1 Answer

How do I replace the water pump on a 1994 buick la sabre


3.8 engine you drain out coolant.remove serpentine belt and coolant hoses from water pump .then you remove pulley bolts then water pump bolts. then clean gasket surface be careful dont scratch the surfaces up.put in new pump. toque it to 29 ft the long bolts.torque .97 inch pound for short bolts.

May 01, 2009 | 1994 Buick LeSabre

Not finding what you are looking for?
1994 Buick LeSabre Logo

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...