Question about 2003 Jeep Wrangler

1 Answer

Getting code P1022 when checking onboard diag. chek engine light also on intermitt 03 jeep wrangler 6 cyl 4X4

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

That is an injector problem.injector # 2 is letting out a high output.this could be there is a bad connector or a damaged wire.this will affect the way your injector reacts and will cause the check engine to go on and off.you would need an injector tester to check the spray pattern for your injector.

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace the bell housing of a 1989 jeep wrangler 4-cyl 4x4?


why are you replacing the bellhousing?,it means you are going to have to pull out the motor or the gearbox/transfer case,whichever is easieast

Jul 04, 2014 | 1989 Jeep Wrangler

1 Answer

2000 jeep wrangler won't start, good crank, no bus


Check fuses first, but could be needs new CPU

Jun 14, 2012 | 2000 Jeep Wrangler

1 Answer

Sport Wrangler 6 cyl. Engine lite flashing. Diagnostic tool lists code PO305. I looked it up and it states misfire in cyl #3 & 5. How do I fix this?


Check the plugs, wires and coil pack for these two cylinders. Most lilkely it is the coil pack, they work for 2 cyclinders at a time. cylinder motors use 3 and 8 cyl moters use 4 of these. If your und=sure where the coil pack is, follow it backwards from the spark plugs.

Jul 08, 2011 | 2002 Jeep Wrangler

2 Answers

The check engine light came on my 1998 jeep wrangler. I can not find anything wrong. What could be the reason the check engine light came on?


well first without knowing the code no one can diag the possibilities could be anything! but if it came on , the computer saw something

Mar 13, 2011 | 1998 Jeep Wrangler

1 Answer

1994 jeep wrangler 6 cyl 5 spd no start


have u ck out the ignition switch [not the key & tumblers],, or the neutral safety switch to see if u have power ,,also seen broken wire at solenoid on starter too,,hope it helped,,

Apr 05, 2010 | 1994 Jeep Wrangler

1 Answer

2004 wrangler chek engine light on. Code


a fuel cap indication would mean a leak not nessesaraly your gas cap, id check the fuel neck vent hose for a leak

Nov 04, 2009 | 2003 Jeep Wrangler

1 Answer

98 jeep wrangler 4.0 6 cyl. sputtering/near stalling all speeds


hi april, it sounds like the camshaft position sensor is failing!...question?, does your temperature gauge work normaly?, is there any check engine lights on? if so let me know the code number and i can help ya! good luck, marty

Jun 04, 2009 | 1998 Jeep Wrangler

2 Answers

2002 Jeep Wrangler 4.0 When Driving the Engine Dies


Put the key in the ignition and turn it on and off (3) times without starting the jeep, leaving it in the on position count the (1) flashing indicator Light, Eg: (5) flashes, Then there will be a pause, then it may flash (3) times, this is a code #53. Keep your Eye on them and write them down. If you should miss (1) Repeat as many times as needed, Info: A #55 means there are no codes!!

May 30, 2009 | 2002 Jeep Wrangler

2 Answers

97 wrangler 6 cyl ck eng lite just came on light


first you need to find out the code auto zone or advance auto should give you a code reading , i try to help but without the trouble code im lost

Dec 19, 2008 | 1997 Jeep Wrangler

Not finding what you are looking for?
2003 Jeep Wrangler Logo

Related Topics:

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...