Question about Chevrolet Corsica

1 Answer

Misfire at idle backfire under load - Corsica Chevrolet Cars & Trucks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Check the plugs.replace them if you havent.wires should be ok too.coil pack must be in good shape.if all this is done then you must look at your throttle body.if this is dirty and blocked your engine will run very bad on idle and under load.

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Idles ok backfires thru exhaust under a load


Since it is so old, Start with a compression test. 90lbs is about minimal. The cylinders should be with in 10% of each other. If your there or lower, Time to retire or rebuild this engine. This part here will save you time, trouble and money into an engine that won't be any better when your done.

Feb 08, 2016 | 1987 Ford F 150

1 Answer

Why my 5.7 backfires and misses at acceleration


it look like spark plug defect or leak at spark plug wires
misfire Under load if you don't have any engine code malfunction

hope it helps

Oct 10, 2014 | 1997 Chevrolet Tahoe

1 Answer

What is settin the po300 random multiple misfire/?


you have a bed coil (s). That's what causes misfire. Your DIC should be specific about which cylinder coil you're having trouble with.

Apr 28, 2014 | Volvo S80 Cars & Trucks

1 Answer

Is it harmfull to run with a PO105 oroblem


P0105 Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction,

Symptoms of a P0105 check engine light code may include:

  • Poor running engine
  • Engine runs rich
  • Engine won't idle
  • Engine backfires through tailpipe
  • Engine misfire under load or at idle
  • MIL (Malfunction Indicator Lamp) illumination
  • In some extreme cases there may be no symptoms other than MIL illumination, could be caused by:
    • MAP sensor vacuum hose disconnected or plugged
    • Bad MAP sensor
    • Bad TPS good-day !

Apr 07, 2012 | Jaguar XKR Cars & Trucks

1 Answer

Backfires under e4xceliration


Simple things first...Misfiring possibly due to bad coil packs or wires are arcing out. While the car is idling spray the coil packs with a fine mist of water and watch/listen for misfiring... then spray the plug wires and do the same...
Possible crank sensor going bad or timing issue due to wires being hooked up in wrong order.

Jul 18, 2011 | 1992 Cadillac Seville

1 Answer

K2500 chevy 3/4 ton pick up. no power under load


IN your distributer under the rotor is a magnet and a pickup coil (the magnet is known as a pole piece) check your pickup coil for corrsion (green in color) and the module and also check pole piece for cracks in the magnet where the rivets hold it together. sometimes oil wicks up around the distributer shaft because of housing wear or the pieces just wear out over time.

May 16, 2010 | 1999 Chevrolet K2500

1 Answer

My truck backfires occasionally and misfires.


Check fuel pressure. When does it backifre, Idle? on accel? cruise? all the time? sometimes? help us help you.

May 13, 2010 | 2003 Chevrolet Silverado 1500

1 Answer

2002 Ford Windstar p0300 skips and backfires under load


Just put a coil on a 2002 today. Coils fail a lot with no codes given

Mar 09, 2010 | 2002 Ford Windstar Cargo

1 Answer

Engine Performance problem 1997 Chevy S-10 4


According to my book, the first code is the brake control rough road sensor, and P0302 is a cyllinder #2 misfire. Check the gap on your plug, and make sure the plug wire is on all the way. Give the boot an extra good push. Backfiring or misfiring under load is always caused by poor ignition. You may also have a faulty plug or wire.

Oct 21, 2009 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...