Question about 1991 Ford Ranger Supercab

2 Answers

Takes off in 2nd gear. Rebuilt trans,still takes off in second gear

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 881 Answers

Tell me something was the truck taking off in 2nd gear before you took it in for rebuild.
And still the same as when you had it done ... If yes then they dident do a good job infact they dident do any sort of job as it sounds like its either the pump or the band as they are worked by the body valve in the bottom of the box and that couldent have been looked at ..So yes take it back at FOC (free of charge ) job

Posted on Oct 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Take it back to whoever rebuilt the trans. Dont give them anymore money if they told you a rebuild was going to fix it.

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Dodge intrepid problems


Have a qualified transmission shop rebuild it be sure to flush your cooler lines flushed before you install the rebuilt trans.

Dec 11, 2013 | Cars & Trucks

2 Answers

How do you adjust the shift cable on a 1995 gmc jimmy, wont go into reverse or park.


On the 1995 Jimmy, the shift cable can come loose on the mount on the side of the transmission where the cable meets the trans. When it slips, the alignment goes off and causes the driver to not be able to put the trans into park. If you take a long stick you can push the shift arm on the trans to the park position and your trans will go into park.....what you (and I) really need to know is how to take the shift cable mount apart and reset it.

Aug 05, 2012 | GMC Jimmy Cars & Trucks

1 Answer

Won't shift from 2nd gear to drive unless i run rpms up to about 5000 also trans rpm limiter not shutting down engine at high rpm's . on a 1997 Dodge Dakota 4x4 SLT. had tranny rebuilt 1 year ago Tranny...


This trans has a safety built in to default to second gear if the computer sees any kind of problem. Have it scanned. It can be an input or out put speed sensor, or even a temp sensor on the engine. If there are codes that say ratio error, take it back to who rebuilt it and hope they will take care of you. I use to give a major discount if they were not too far out of warranty.

Jan 09, 2010 | 1997 Dodge Dakota

1 Answer

Nissan sentra 1993 wont ship transmision stuck on 2nd gear


If second gear stuck it need rebuilt ore replaced.
check what labor to rip one out replace a junk yard one ore check see what cost rebuilt it.
stay away form amco there rip off artist.
Your cost about 900 to 1000/.
if you do your self 600 for junk yard one and few hundread if you can get rebuild kit rebuild the trasmission your self.
I took trans rebuilt i rather buy used ore pay some rebuild it.
Give thumbs up if that help seya

Aug 18, 2009 | 1993 Nissan Sentra 4 Door

1 Answer

Trouble shifting gears. Gears grinding while shifting from 1st to 2nd. Also cannot down shift from 2nd to 1st unless going less than 10 mph


YOU NEED TO TAKE YOUR TRANS OUT AND HAVE IT REBUILT, THE SYNCHROS ARE WORN OUT!!
THAT IS WHY YOU HAVE TROUBLE SHIFTING GEARS!!

Jul 01, 2009 | 2001 Dodge Dakota

1 Answer

Nissan Sentra 2005 automatic. gear shift from 1st to 2nd


drain and fill trans with fresh fluid
trans may have to be rebuilt

sorry

Jun 24, 2009 | 2004 Nissan Sentra

1 Answer

I have a 94 silverado with a 4l60e trans. 1st and 2nd gears shift fine 3rd and o.d.does not engage.i had the trans. rebuilt 9 months ago. is my problem the shift solenoids or the fuse for the trans. .


how it sounds that the solenoids are going bad i would take it back to the shop were you had it rebuilt and have them redo it most shops give a one year warranty on the rebuilds if so they should be able to fix it for free.

Jun 09, 2009 | 1994 Chevrolet C1500

1 Answer

2000 jeep grand cherokee laredo hesitates in 2nd gear when cold


Is it manual or auto trans? If manual the gear lube is thicker when cold and the syncronizers tend to stick and not slide free for grind free shifting or for locking into gear.
If Auto trans if the jeep is warmed up setting then cycle the gears before driving. If that helps then the fluid is not getting through the valve body properly. It could be metal in the body or filter or cold seals are letting fluid by til the seals warm, expand and hold pressure. I'm assuming trans fluid is good, not old. One item that can lead to poor cold shift in an auto trans is a bad torque convertor. Since it seems to be a second gear issue the second section of the trans could have a bad seal. In an auto trans I'd take to a shop and have a cold pressure test done. They will tell which one is the problem.

Mar 20, 2009 | 2000 Jeep Grand Cherokee

1 Answer

1996 Nissan Maxima no 2nd gear on auto transmission?


do not flush the trans, that will make it worse.
My friend you have no second gear, you need trans rebuilt.
If you flush it now you can cause more damage.

Feb 25, 2009 | 1996 Nissan Maxima

1 Answer

1994 F350 transmission intermittent problem


I had the same problem in my 96 f-350. The transmission has slipped recording a slip code in the transmission. You can pull the codes and get it. I shifts into a safe mode that increases the pressure inside your transmission as part od a fail safe. Plain and simple, you have to have the tranny rebuilt.

Dec 06, 2008 | 1994 Ford F350 Crew Cab

Not finding what you are looking for?
1991 Ford Ranger Supercab Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...